XC6216BB21MR-G

XC6216/XE6216 Series Voltage Regulators with Stand-by Function - Input Voltage: 28V ETR0321_012 ■GENERAL DESCRIPTION XC6216/XE6216 series are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor. The output voltage is selectable in 0.1V increments within the range of 2.0V to 12V using laser trimming technologies. With external resistors, the output voltage range can be expanded from 2.0V to 23V. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption. ■APPLICATIONS ●Car audio, Car navigation systems ●Note book computers, PDAs ●Home appliances ●Audio visual equipment (Cameras, VCRs, etc.) ●Cordless phones, Wireless communication equipment ■FEATURES Max Output Current Dropout Voltage Input Voltage Range Output Voltage Range Fixed Output Accuracy Low Power Consumption Stand-by Current High Ripple Rejection Operating Temperature Low ESR Capacitor Built–in Protection Small Packages : More than 150mA (200mA limit) (VIN=VOUT+3.0V) : 300mV@IOUT=20mA : 2.0V~28.0V : 2.0V~12.0V (0.1V increments) 2.0V~23V with external resistors :±2% ±1% optional for XC6216 series : 5μA : Less than 0.1μA : 30dB@1kHz : -40℃~+85℃ : Ceramic Capacitor Compatible : Current Limit Circuit Thermal Shutdown Circuit : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252 ■ TYPICAL APPLICATION CIRCUIT ■ TYPICAL PERFORMANCE CHARACTERISTICS ●Output Voltage vs. Input Volatage 1/44 XC6216/XE6216 Series ■PIN CONFIGURATION SOT-25 (TOP VIEW) SOT-89 (TOP VIEW) SOT-89-5 (TOP VIEW) USP-6C (BOTTOM VIEW) * The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 5) pin. SOT-223 (TOP VIEW) TO-252 (TOP VIEW) ■PIN ASSIGNMENT ●XC6216B/XE6216B Series SOT-25* 1 2 3 4 5 PIN NUMBER SOT-89-5 USP-6C* 5 6 2 5 4 4 3 3 1 1 2 *The XE6216B in SOT-25 and USP-6C are under development. PIN NAME VIN VSS NC CE VOUT NC FUNCTIONS Power Input Ground No connection ON/OFF Control Output No connection ●XC6216C Series SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 5 2 4 3 1 USP-6C 6 5 4 3 1 2 PIN NAME VIN VSS VOFB CE VOUT NC FUNCTIONS Power Input Ground Output Voltage Adjustment ON/OFF Control Output No connection ●XC6216D/XE6216D Series SOT-89* 3 2 1 PIN NUMBER SOT-223* 3 2 1 *The XE6216D in SOT-89, SOT-223 and TO-252 are under development. TO-252* 1 2 3 PIN NAME VIN VSS VOUT FUNCTIONS Power Input Ground Output 2/43 XC6216/XE6216 Series ■ PRODUCT CLASSIFICATION ●Ordering Information XC6216①②③④⑤⑥-⑦ DESIGNATOR ① (*1) DESCRIPTION Type and Options of Regulators SYMBOL B C D DESCRIPTION Fixed output voltage, High Active Output voltage externally set, High Active Fixed output voltage, No CE function For the voltage within 2.0V ~9.9V (0.1V increments); e.g. 2.5V ⇒ 25 5.0V ⇒ 50 For the voltage above 10.0V (0.1V increments); e.g. 10.6V ⇒ A6 11.2V ⇒ B2 12.0V ⇒ C0 For C type (output voltage externally set), VOFB=2.0V only Within ±2% accuracy Within ±1% accuracy SOT-25 ( for B and C types only) SOT-25 ( for B and C types only) (Halogen & Antimony free) SOT-89-5 (for B and C types only) SOT-89 (for D type only) SOT-89 (for D type only) (Halogen & Antimony free) USP-6C (for B and C types only) SOT-223 (for D type only) SOT-223 (for D type only) (Halogen & Antimony free) TO-252 (for D type only) ②③ Output Voltage 20 ~ C0 20 ④ Output Voltage Accuracy (*2) 2 1 MR MR-G PR PR PR-G ER FR FR-G JR ⑤⑥-⑦ Packages Taping Type (*3) (*1) (*2) (*3) The ”-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant. For the C type, the accuracy is based on VOFB voltage. The actual output voltage accuracy is depended on the external resistances. The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or representative. (Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦) XE6216①②③④⑤⑥ DESIGNATOR ① DESCRIPTION Type and Options of Regulators SYMBOL B D DESCRIPTION Fixed output voltage, High Active Fixed output voltage, without CE function For the voltage within 2.0V ~9.9V; e.g. 2.5V ⇒ 25 5.0V ⇒ 50 For the voltage above 10.0V; e.g. 10.6V ⇒ A6 11.2V ⇒ B2 12.0V ⇒ C0 For C type (output voltage externally set), VOFB=2.0V only Within ±2% accuracy SOT-25 ( for B type only) *(under development) SOT-89-5 (for B type only) SOT-89-5 (for B type only) *(under development) SOT-89 (for D type only) *(under development) USP-6C (for B type only) *(under development) ②③ Output Voltage 20~C0 20 ④ Output Voltage Accuracy 2 MR-G PR PR-G PR-G ER ⑤⑥ Packages Taping Type (*1) *The XE6216Bxx2M, XE6216Dxx2P, XC6216Bxx2E are under development. (*1) The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or representative. (Standard orientation: ⑤R, Reverse orientation: ⑤L) 3/43 XC6216/XE6216 Series ■ BLOCK DIAGRAMS ●XC6216B/XE6216B Series (SOT-25, SOT-89-5, USP-6C) *XE6216B in SOT-25 and USP-6C are under development. ●XC6216C Series (SOT-25, SOT-89-5, USP-6C) ●XC6216D/XE6216D Series (SOT-89, SOT-223, TO-252) *The XE6216D in SOT-89, SOT-223 and TO-252 are under development. 4/43 XC6216/XE6216 Series ■ABSOLUTE MAXIMUM RATINGS ●XC6216B Series PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage SOT-25 Power Dissipation SOT-89-5 USP-6C Operating Temperature Range Storage Temperature Range *1: IOUT≦Pd / (VIN-VOUT) *2: The power dissipation figure shown is PCB mounted. Please refer to pages 37 ~ 40 for details. SYMBOL VIN IOUT VOUT VCE Pd Topr Tstg RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 VSS-0.3~30 250 (*2) 600 (PCB mounted) 500 (*2) 1300 (PCB mounted) 100 (*2) 1000 (PCB mounted) -40~+85 -55~+125 UNITS V mA V V mW (Ta=25℃) ℃ ℃ ●XC6216C Series PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage FB Voltage SOT-25 Power Dissipation SOT-89-5 USP-6C Operating Temperature Range Storage Temperature Range *1: IOUT≦Pd / (VIN-VOUT) *2: The power dissipation figure shown is PCB mounted. Please refer to pages 37 ~ 40 for details. SYMBOL VIN IOUT VOUT VCE VOFB Pd Topr Tstg RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 VSS-0.3 ~ 30 VSS-0.3 ~ 30 250 (*2) 600 (PCB mounted) 500 (*2) 1300 (PCB mounted) 100 (*2) 1000 (PCB mounted) -40~+85 -55~+125 UNITS V mA V V V mW (Ta=25℃) ℃ ℃ ●XC6216D Series PARAMETER Input Voltage Output Current Output Voltage SOT-89 Power Dissipation SOT-223 SYMBOL VIN IOUT VOUT Pd RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 500 300 1500 (PCB mounted) (*2) 500 -40~+85 -55~+125 UNITS V mA V mW (Ta=25℃) ℃ ℃ TO-252 Operating Temperature Range Storage Temperature Range *1: IOUT≦Pd / (VIN-VOUT) Topr Tstg *2: The power dissipation figure shown is PCB mounted. Please refer to pages 37 ~ 40 for details. 5/43 XC6216/XE6216 Series ■ABSOLUTE MAXIMUM RATINGS (Continued) ●XE6216B Series PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage *The XE6216B in SOT-25 and USP-6C are under development. SYMBOL RATINGS UNITS VIN IOUT VOUT VCE SOT-25 Power Dissipation VSS-0.3～30 300 (*1) VSS-0.3～VIN+0.3 VSS-0.3～30 250 600 (PCB mounted) (*2) V mA V V SOT-89-5 USP-6C Pd 500 1300 (PCB mounted) (*2) mW （Ta=25℃） 100 1000 (PCB mounted) (*2) Operating Temperature Range Junction Temperature Storage Temperature Range *1: IOUT≦Pd / (VIN-VOUT) Topr TJ Tstg -40～+85 -40～+125 -55～+125 ℃ ℃ ℃ *2: The power dissipation figure shown is PCB mounted. Please refer to pages 37 ~ 40 for details. ●XE6216D Series PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage Power Dissipation *Under Development SYMBOL RATINGS UNITS VIN IOUT VOUT VCE Pd Topr TJ Tstg VSS-0.3～30 300 (*1) VSS-0.3～VIN+0.3 VSS-0.3～30 500 -40～+85 -40～+125 -55～+125 V mA V V mW （Ta=25℃） ℃ ℃ ℃ SOT-89 Operating Temperature Range Junction Temperature Storage Temperature Range *1: IOUT≦Pd / (VIN-VOUT) 6/43 XC6216/XE6216 Series ■ELECTRICAL CHARACTERISTICS ●XC6216B Series PARAMETER Output Voltage Maximum Output Current SYMBOL VOUT(E) IOUTMAX CONDITIONS IOUT=20mA, VCE=VIN VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T)≧3.0V) VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T)＜3.0V) VIN=VOUT(T)+2.0V, 1mA≦IOUT≦50mA, VCE=VIN, (2.0V≦VOUT(T)≦7.0V) VIN=VOUT(T)+2.0V, 1mA≦IOUT≦50mA, VCE=VIN, (7.1V≦VOUT(T)≦12.0V) IOUT=20mA, VCE=VIN IOUT=100mA, VIN = VOUT(T)+3.0V, VCE=VIN (VOUT(T)