TC74HCT541AP

TC74HCT540,541AP/AF TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HCT540AP,TC74HCT540AF TC74HCT541AP,TC74HCT541AF Octal Bus Buffer with TTL Input Level TC74HCT540AP/AF Inverting, 3-State Outputs TC74HCT541AP/AF Non-Inverting, 3-State Outputs The TC74HCT540A/TC74HCT541A are high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate C2MOS technology. These devices may be used as a level converter for interfacing TTL or NMOS to High Speed CMOS. The inputs are compatible with TTL, NMOS and CMOS output voltage levels. They achive the high speed operation similar to equivalent LSTTL while maintaing the CMOS low power dissipation. The TC74HCT540A is an inverting type, and the TC74HCT541A is a non-inverting type. When either G1 or G2 are high, the terminal outputs are in the high-impedance state. All inputs are equipped with protection circuits against static discharge or transient excess voltage. TC74HCT540AP, TC74HCT541AP TC74HCT540AF, TC74HCT541AF Features • • • • • • • • High speed: tpd = 10 ns (typ.) at VCC = 5 V Low power dissipation: ICC = 4 μA (max) at Ta = 25°C Compatible with TTL outputs: VIL = 0.8 V (max) VIH = 2.0 V (min) Wide interfacing ability: LSTTL, NMOS, CMOS Output drive capability: 15 LSTTL loads Symmetrical output impedance: |IOH| = IOL = 6 mA (min) Balanced propagation delays: tpLH ∼ tpHL − Pin and function compatible with 74LS540/541 Weight DIP20-P-300-2.54A SOP20-P-300-1.27A : 1.30 g (typ.) : 0.22 g (typ.) 1 2007-10-01 TC74HCT540,541AP/AF Pin Assignment TC74HCT540A TC74HCT541A IEC Logic Symbol TC74HCT540A TC74HCT541A Truth Table Inputs Outputs G1 H X L L G2 X H L L An X X H L Yn* Z Z H L Yn * Z Z L H X: Don’t care Z: High impedance *: Yn............. HCT541A Yn ........... HCT540A 2 2007-10-01 TC74HCT540,541AP/AF Absolute Maximum Ratings (Note 1) Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating −0.5~7 −0.5~VCC + 0.5 −0.5~VCC + 0.5 ±20 ±20 ±35 ±75 Unit V V V mA mA mA mA mW °C 500 (DIP) (Note 2)/180 (SOP) −65~150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: 500 mW in the range of Ta = −40 to 65°C. From Ta = 65 to 85°C a derating factor of −10 mW/°C shall be applied until 300 mW. Operating Ranges (Note) Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr tr, tf Rating 4.5~5.5 0~VCC 0~VCC −40~85 Unit V V V °C ns 0~500 Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Electrical Characteristics DC Characteristics Characteristics High-level input voltage Low-level input voltage High-level output voltage Low-level output voltage 3-state output off-state current Input leakage current Quiescent supply current Symbol VIH VIL VOH VOL IOZ IIN ICC IC Test Condition VCC (V) ⎯ ⎯ Ta = 25°C Min 2.0 ⎯ Ta = −40~85°C Max ⎯ Typ. ⎯ ⎯ Min 2.0 ⎯ Max ⎯ Unit V V V V μA μA μA 4.5~5.5 4.5~5.5 4.5 4.5 4.5 4.5 5.5 5.5 5.5 5.5 0.8 ⎯ ⎯ 0.8 ⎯ ⎯ IOH = −20 μA VIN = VIH or VIL I OH = −6 mA IOL = 20 μA VIN = VIH or VIL I = 6 mA OL VIN = VIH or VIL VOUT = VCC or GND VIN = VCC or GND VIN = VCC or GND Per input: VIN = 0.5 V or 2.4 V Other input: VCC or GND 4.4 4.18 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 4.5 4.31 0.0 0.17 ⎯ ⎯ ⎯ ⎯ 4.4 4.13 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 0.1 0.26 ±0.5 ±0.1 0.1 0.33 ±5.0 ±1.0 4.0 2.0 40.0 2.9 mA 3 2007-10-01 TC74HCT540,541AP/AF AC Characteristics (input: tr = tf = 6 ns) Characteristics Symbol tTLH tTHL Test Condition CL (pF) VCC (V) ⎯ Ta = 25°C Min ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Ta = −40~85°C Max 12 11 20 18 26 24 23 21 29 27 30 27 36 33 30 27 10 ⎯ ⎯ ⎯ Typ. 7 6 12 9 17 14 14 11 19 16 18 16 23 21 18 16 5 10 35 31 Min ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Max 15 14 25 23 33 30 29 27 36 33 38 35 45 41 38 35 10 ⎯ ⎯ ⎯ Unit Output transition time 50 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 ns Propagation delay time (TC74HCT540A) tpLH tpHL 50 ⎯ ns 150 Propagation delay time (TC74HCT541A) tpLH tpHL 50 ⎯ ns 150 Output enable time tpZL tpZH 50 RL = 1 kΩ 150 ns Output disable time Input capacitance Output capacitance Power dissipation capacitance tpLZ tpHZ CIN COUT CPD RL = 1 kΩ ⎯ ⎯ 50 ns pF pF pF TC74HCT540A (Note) TC74HCT541A Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC/8 (per bit) 4 2007-10-01 TC74HCT540,541AP/AF Package Dimensions Weight: 1.30 g (typ.) 5 2007-10-01 TC74HCT540,541AP/AF Package Dimensions Weight: 0.22 g (typ.) 6 2007-10-01 TC74HCT540,541AP/AF RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN GENERAL • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-10-01