TC74VCX14FK

TC74VCX14FT/FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCX14FT,TC74VCX14FK Low-Voltage Hex Schmitt Inverter with 3.6-V Tolerant Inputs and Outputs The TC74VCX14FT/FK is a high-performance CMOS schmitt inverter which is guaranteed to operate from 1.2-V to 3.6-V. Designed for use in 1.5V, 1.8V, 2.5V or 3.3V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with over-voltage tolerant inputs and outputs up to 3.6 V. Pin configuration and function are the same as the TC74VCX04 but the inputs have hysteresis and with its schmitt trigger function, the TC74VCX14 can be used as a line receivers which will receive slow input signals. All inputs are equipped with protection circuits against static discharge. TC74VCX14FT TC74VCX14FK Features • • Low-voltage operation: VCC = 1.2~3.6 V High-speed operation : tpd = 4.0 ns (max) (VCC = 3.0~3.6 V) : tpd = 4.3 ns (max) (VCC = 2.3~2.7 V) : tpd = 8.6 ns (max) (VCC = 1.65~1.95 V) : tpd = 17.2 ns (max) (VCC = 1.4~1.6 V) : tpd = 43.0 ns (max) (VCC = 1.2 V) • Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) : IOH/IOL = ±18 mA (min) (VCC = 2.3 V) : IOH/IOL = ±6 mA (min) (VCC = 1.65 V) : IOH/IOL = ±2 mA (min) (VCC = 1.4 V) • • • • Latch-up performance: −300 mA ESD performance: Machine model ≥ ±200 V Human body model ≥ ±2000 V Package: TSSOP and VSSOP (US) Power-down protection provided on all inputs and outputs Weight TSSOP14-P-0044-0.65A VSSOP14-P-0030-0.50 : 0.06 g (typ.) : 0.02 g (typ.) 1 2007-10-19 TC74VCX14FT/FK Pin Assignment (top view) IEC Logic Symbol 1A 1A 1Y 2A 2Y 3A 3Y GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC 6A 6Y 5A 5Y 4A 4Y 2A 3A 4A 5A 6A (1) (3) (5) (9) (11) (13) (2) (4) (6) (8) (10) (12) 1Y 2Y 3Y 4Y 5Y 6Y Truth Table Inputs A L H Outputs Y H L System Diagram and Waveforms A Y VH VP VN VIN (A) VOUT (Y) 2 2007-10-19 TC74VCX14FT/FK Absolute Maximum Ratings (Note 1) Characteristics Power supply voltage DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating −0.5~4.6 −0.5~4.6 −0.5~4.6 (Note 2) −0.5~VCC + 0.5 (Note 3) −50 ±50 ±50 180 ±100 −65~150 (Note 4) Unit V V V mA mA mA mW mA °C Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: VCC = 0 V Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC Operating Ranges (Note 1) Characteristics Power supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 1.2~3.6 −0.3~3.6 0~3.6 0~VCC ±24 Output current IOH/IOL ±18 ±6 ±2 Operating temperature Topr −40~85 (Note 2) (Note 3) (Note 4) (Note 5) (Note 6) (Note 7) °C mA Unit V V V Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: VCC = 0 V Note 3: High or low state Note 4: VCC = 3.0~3.6 V Note 5: VCC = 2.3~2.7 V Note 6: VCC = 1.65~1.95 V Note 7: VCC = 1.4~1.6 V 3 2007-10-19 TC74VCX14FT/FK Electrical Characteristics < DC Characteristics (Ta = −40 to 85°C, 2.7 V < VCC = 3.6 V) Characteristics Symbol Test Condition VCC (V) 3.6 3.0 3.6 3.0 3.6 3.0 IOH = −100 μA H-level VOH VIN = VIL IOH = −12 mA IOH = −18 mA Output voltage IOH = −24 mA IOL = 100 μA L-level VOL VIN = VIH IOL = 12 mA IOL = 18 mA IOL = 24 mA Input leakage current Power-off leakage current Quiescent supply current Increase in ICC per input IIN IOFF ICC ΔICC VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VIH = VCC − 0.6 V 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7 3.0 3.0 2.7~3.6 0 2.7~3.6 2.7~3.6 2.7~3.6 Min ⎯ ⎯ 0.8 0.7 0.3 0.3 VCC − 0.2 2.2 2.4 2.2 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Max 2.2 2.0 ⎯ ⎯ 1.2 1.2 ⎯ ⎯ ⎯ ⎯ 0.2 0.4 0.4 0.55 ±5.0 10.0 20.0 ±20.0 750 μA μA μA V V Unit H-level Input voltage L-level VP ⎯ V VN ⎯ V Hysteresis voltage VH ⎯ V < < DC Characteristics (Ta = −40 to 85°C, 2.3 V = VCC = 2.7 V) Characteristics H-level L-level Symbol VP VN VH Test Condition ⎯ ⎯ ⎯ IOH = −100 μA H-level Output voltage VOH VIN = VIL IOH = −6 mA IOH = −12 mA IOH = −18 mA IOL = 100 μA L-level VOL VIN = VIH IOL = 12 mA IOL = 18 mA Input leakage current Power-off leakage current Quiescent supply current IIN IOFF ICC VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VCC (V) 2.3 2.3 2.3 2.3~2.7 2.3 2.3 2.3 2.3~2.7 2.3 2.3 2.3~2.7 0 2.3~2.7 2.3~2.7 Min ⎯ 0.5 0.3 VCC − 0.2 2.0 1.8 1.7 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Max 1.6 ⎯ 1.0 ⎯ ⎯ ⎯ ⎯ 0.2 0.4 0.6 ±5.0 10.0 20.0 ±20.0 μA μA μA V V Unit V V V Input voltage Hysteresis voltage 4 2007-10-19 TC74VCX14FT/FK < DC Characteristics (Ta = −40 to 85°C, 1.65 V = VCC < 2.3 V) Characteristics H-level L-level Symbol VP VN VH H-level Output voltage L-level Input leakage current Power-off leakage current Quiescent supply current VOL IIN IOFF ICC VIN = VIH VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VOH VIN = VIL Test Condition ⎯ ⎯ ⎯ IOH = −100 μA IOH = −6 mA IOL = 100 μA IOL = 6 mA VCC (V) 1.65 1.65 1.65 1.65~2.3 1.65 1.65~2.3 1.65 1.65~2.3 0 1.65~2.3 1.65~2.3 Min ⎯ 0.25 0.2 VCC − 0.2 1.25 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Max 1.4 ⎯ 0.95 ⎯ ⎯ 0.2 0.3 ±5.0 10.0 20.0 ±20.0 V μA μA μA Unit V V V V Input voltage Hysteresis voltage < DC Characteristics (Ta = −40 to 85°C, 1.4 V = VCC< 1.65 V) Characteristics H-level L-level Symbol VP VN VH H-level Output voltage L-level Input leakage current Power-off leakage current Quiescent supply current VOL IIN IOFF ICC VIN = VIH VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = VOH VIN = VIL Test Condition ⎯ ⎯ ⎯ IOH = −100 μA IOH = −2 mA IOL = 100 μA IOL = 2 mA VCC (V) 1.4 1.4 1.4 1.4~1.65 1.4 1.4~1.65 1.4 1.4~1.65 0 1.4~1.65 1.4~1.65 Min ⎯ 0.2 0.2 VCC − 0.2 1.05 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ Max 1.2 ⎯ 0.9 ⎯ ⎯ 0.05 0.35 ±5.0 10.0 20.0 ±20.0 V μA μA μA Unit V V V V Input voltage Hysteresis voltage 5 2007-10-19 TC74VCX14FT/FK < DC Characteristics (Ta = −40 to 85°C, 1.2 V = VCC < 1.4 V) Characteristics H-level L-level Symbol VP VN VH H-level L-level Input leakage current Power-off leakage current Quiescent supply current VOH VOL IIN IOFF ICC VIN = VIL VIN = VIH VIN = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < VIN < 3.6 V = = Test Condition ⎯ ⎯ ⎯ IOH = −100 μA IOL = 100 μA VCC (V) 1.2 1.2 1.2 1.2 1.2 1.2 0 1.2 1.2 Min ⎯ 0.05 0.2 VCC − 0.1 ⎯ ⎯ ⎯ ⎯ ⎯ Max 1.1 ⎯ 0.9 ⎯ 0.05 ±5.0 10.0 20.0 ±20.0 Unit V V V V V μA μA μA Input voltage Hysteresis voltage Output voltage AC Characteristics (Ta = −40 to 85°C, input: tr = tf = 2.0 ns) (Note 1) Characteristics Symbol Test Condition VCC (V) 1.2 1.5 ± 0.1 1.8 ± 0.15 CL = 30 pF, RL = 500 Ω 2.5 ± 0.2 3.3 ± 0.3 CL = 15 pF, RL = 2 kΩ Output to output skew tosLH tosHL (Note 2) CL = 30 pF, RL = 500 Ω 1.2 1.5 ± 0.1 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 Min 3.0 2.0 1.5 0.8 0.6 ⎯ ⎯ ⎯ ⎯ ⎯ Max 43.0 17.2 8.6 4.3 4.0 1.5 1.5 0.5 0.5 0.5 ns ns Unit CL = 15 pF, RL = 2 kΩ Propagation delay time tpLH tpHL Figure 1, Figure 2 Note 1: For CL = 50 pF, add approximately 300 ps to the AC maximum specification. Note 2: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) 6 2007-10-19 TC74VCX14FT/FK Dynamic Switching Characteristics (Ta = 25°C, input: tr = tf = 2.0 ns, CL = 30 pF) Characteristics Symbol Test Condition VIH = 1.8 V, VIL = 0 V Quiet output maximum dynamic VOL VOLP VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOL VOLV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOH VOHV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) VCC (V) 1.8 2.5 3.3 1.8 2.5 3.3 1.8 2.5 3.3 Typ. 0.25 0.6 0.8 −0.25 −0.6 −0.8 1.5 1.9 2.2 Unit V V V V V V V V V Note: Parameter guaranteed by design. Capacitive Characteristics (Ta = 25°C) Characteristics Input capacitance Power dissipation capacitance Symbol CIN CPD fIN = 10 MHz Test Condition ⎯ (Note) VCC (V) 1.8, 2.5, 3.3 1.8, 2.5, 3.3 Typ. 6 20 Unit pF pF Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC/6 (per gate) 7 2007-10-19 TC74VCX14FT/FK AC Test Circuit Output CL RL VCC Symbol 3.3 ± 0.3 V 2.5 ± 0.2 V 1.8 ± 0.15 V 500 Ω 30 pF 1.5 ± 0.1 V 1.2V 2 kΩ 15 pF Measure RL CL Figure 1 AC Waveform tf 2.0 ns Input (A) tr 2.0 ns 90% VM VIH 10% Output (Y) tpLH VOH VM tpHL VOL Symbol VIH VM VCC 3.3 ± 0.3 V 2.7 V 1.5 V 2.5 ± 0.2 V VCC VCC/2 1.8 ± 0.15 V VCC VCC/2 1.5 ± 0.1 V VCC VCC/2 1.2 V VCC VCC/2 Figure 2 tpLH, tpHL 8 2007-10-19 TC74VCX14FT/FK Package Dimensions Weight: 0.06 g (typ.) 9 2007-10-19 TC74VCX14FT/FK Package Dimensions Weight: 0.02 g (typ.) 10 2007-10-19 TC74VCX14FT/FK RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. 20070701-EN GENERAL • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 11 2007-10-19