TPVI13-D050I

TOTALAC-DC PCB OPEN FRAME SINGLE & POWER INT'L UNIVERSAL INPUT DUAL OUTPUT 13-15 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVI13 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES LOW-PROFILE & COMPACT PCB FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex # 5045. Input Frequency: 47-63Hz Inrush Current: Typ. 26.0A @230Vac. Input Current: Typ. 0.30A @115Vac, 0.15A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 10mS @115Vac, 40mS @230Vac. Earth Leakage: Typ. 0.25mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 13-15watts. Output Connector: Molex # 5045. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±2.0%. Aux. VO2 typ. ±5.0% (stacked on). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at VO1 (Zener diode). Adjustability: Available at VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 70-80%. Switching Frequency: 40 KHz. Circuit Topology: Fixed Frequency Flyback Circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class II. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 2.12 Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MAIN VO1 MODEL NO. TPVI13-S033030 TPVI13-S050028 TPVI13-S120012 TPVI13-S150010 TPVI13-S240006 TPVI13-S480003 Typ. 3.0A 2.8A 1.2A 1.0A 0.6A 0.3A Volt 3.3V 5.0V 12.0V 15.0V 24.0V 48.0V Peak 3.7A 3.4A 1.5A 1.2A 0.8A 0.4A MODEL NO. TPVI13-D033I TPVI13-D033K TPVI13-D033M TPVI13-D050I TPVI13-D050K TPVI13-D050M DUAL OUTPUT MAIN VO1 Typ. 2.5A 2.5A 2.5A 2.0A 2.0A 2.0A Volt. +3.3V +3.3V +3.3V +5.0V +5.0V +5.0V Max. 3.5A 3.5A 3.5A 2.5A 2.5A 2.5A AUX. VO2 † Typ. 0.4A 0.3A 0.2A 0.4A 0.3A 0.2A Volt. +12V +15V +24V +12V +15V +24V Max. 0.5A 0.4A 0.2A 0.5A 0.4A 0.2A Symbol: " " OVP built-in. "†" Stacked on main output. Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Peak output, less than 60 Sec. with 10% duty cycle. (3) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 62.0g (2.19 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-LINE AC-NEUTRAL P1-L P1-N CONNECTOR & PIN # Mating connector: Molex 5051series or equivalent. SINGLE OUTPUT +VO1 DC-COM P2-4,5 P2-1,2 VO1 P2-4,5 DUAL OUTPUT VO2 P2-3 DC-COM P2-1,2