TPVI20-10B

TOTAL POWER INT'L UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE OUTPUT 10-25 WATTS INTERNAL SWITCHING POWER SUPPLIES TPVI20 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100-240Vac. Input Connector: IEC320-3P DT7. Input Frequency: 47-63Hz. Inrush Current: Typ. 25A @ 230Vac. Input Current: Typ. 0.47A @ 115Vac, 0.21A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 10.0mS @ 115Vac, 40.0mS@ 230Vac. Earth Leakage: Less than 0.7mA @ 230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 20 Watts. Output Connector: Molex 5273. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ±1.0%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main VO1 only. Adjustability: Not adjustable. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 70-75% Switching Frequency: 40K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Operating Temperature: 0 to +50 °C. Storage Temperature: -20 to +85 °C. Temperature Coefficient: Typ. 0.04%/ °C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 1.79Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MAIN VO1 MODEL NO Typ. TPVI20-10A TPVI20-10B TPVI20-10C TPVI20-10D Symbol: " " OVP built-in. Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Peak output, less than 60 Sec. with 10% duty cycle. Volt. 5V 5V 5V 5V Peak 2.5A 3.5A 4.5A 5.5A 2.0A 3.0A 4.0A 5.0A MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 132.5g (4.7 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-LINE AC-NEUTRAL P1- L P1- N CONNECTOR & PIN # Mating connector: P2 Molex 5195 or 5239 series. AC-GROUND P1- G SINGLE OUTPUT VO1 DC COM P2-1,2 P2-3,4