ML485

ML485 Product Features 1.6–3.2 GHz High IP3 Mixer with Integrated LO Amp Product Description The ML485 high linearity converter combines a passive GaAsFET mixer with an integrated LO driver in an ultrasmall lead-free/green/RoHS-compliant MSOP-8 package. The double-balanced integrated IC is able to operate across a wide 1.6-3.2 GHz frequency range to achieve +35 dBm Input IP3 while drawing a very low 40mA current. The ML485 can be used as an upconverter or downconverter in a low-side or high-side LO configuration. A LO buffer amplifier is integrated on the chip to allow for operation directly from a synthesize requiring only 0 dBm of drive level. The dual-stage LO driver provides a stable input power level into the mixer to allow for consistent performance over a wide range of LO power levels. The converter requires no external baluns and supports a wide range of IF frequencies. Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in 2.5G and 3G mobile infrastructure. Due to the wide frequency range of operation, the converter can also be used for WiMAX, WiBro, ISM, and fixed wireless applications. Functional Diagram LO • High dynamic range mixer with integrated LO driver • +35 dBm Input IP3 • 8 dB Conversion Loss • RF: 1600 – 3200 MHz • LO: 1400 – 3500 MHz • IF: 50 – 300 MHz • 5V Supply @ 40 mA • 0 dBm Drive Level • RoHS-compliant MSOP8 (14mm2) 1 2 3 4 8 RF 7 GND 6 GND 5 IF GND GND Vcc Function Vcc RF IF LO GND Pin No. 4 8 5 1 2, 3, 6, 7 Applications • • • • • PCS / 3G Base station / Repeaters TD-SCDMA / WCDMA WiMAX / WiBro ISM / Fixed Wireless HPA Feed Back Paths Specifications Parameter RF Frequency Range LO Frequency Range IF Frequency Range SSB Conversion Loss Input IP3 LO leakage at RF port LO leakage at IF port RF – IF Isolation Return Loss: RF Port Return Loss: IF Port Return Loss: LO Port Input P1dB LO Drive Level Operating Supply Voltage Operating Current Units MHz MHz MHz dB dBm dBm dBm dB dB dB dB dBm dBm V mA Min Typ Max Min Typ Max Min Typ Max Min Typ Max 1700 – 1800 1400 – 1750 50 – 300 9.4 +28 +34 -5 -11 13 13 14 10 20 -2 0 +4 +5 40 1800 – 2200 1500 – 2150 50 – 300 8.7 10 +30 +35 -2 -18 16 13 14 10 20 -2 0 +4 +5 40 2300 – 2400 2000 - 2350 50 – 300 8.5 +37 -1 -25 14 15 14 12 19.5 -2 0 +4 +5 40 2500 – 2700 2200 – 2650 50 – 300 9.0 +36 -1 -15 11 16 14 13 19.5 -2 0 +4 +5 40 1. Specifications are shown at 25 °C, 0 dBm LO drive, IF = 200 MHz, Vdd=5V in a downconverting configuration with a low-side LO. 2. IIP3 is measured with Δf = 1 MHz with RFin = 0 dBm / tone. Absolute Maximum Rating Parameter Storage Temperature Thermal Resistance, Rth Junction Temperature, Tj DC Voltage LO Power Input IF / RF Power Rating -65 to +150 ºC 84 °C / W 150 °C +7 V +10 dBm +27 dBm Ordering Information Part No. ML485 ML485-PCB Description 1.6–3.2 GHz High IP3 Mixer w/ Integrated LO Amp Full Assembled Evaluation Board Specifications and information are subject to change without notice Operation of this device above any of these parameters may cause permanent damage. Standard T/R size = 1000 pieces on a 7” reel. WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • W eb site: www.wj.com, www.TriQuint.com Page 1 of 4 July 2008 ML485 1.6–3.2 GHz High IP3 Mixer with Integrated LO Amp Typical Downconversion Performance Plots Performance using the circuitry on the ML485-PCB Evaluation Board 0.01uF ML 485 Conversion Loss vs RF Frequency vs IF Frequency +25° C, LO = 0 dBm, low-side LO 12 Input IP3 vs RF Frequency vs IF Frequency +25° C, LO = 0 dBm, low-side LO 40 Conversion Loss (dB) 10 Input IP3 (dBm) 38 36 34 32 30 IF = 51MHz IF = 151MHz IF = 201MHz IF = 301MHz 8 IF = 51MHz IF = 151MHz IF = 201MHz IF = 301MHz 6 4 1600 1800 2000 2200 2400 2600 2800 3000 3200 28 1600 1800 2000 2200 2400 2600 2800 3000 3200 RF Frequency (MHz) Conversion Loss vs RF Frequency vs LO Power LO = 0 dBm, IF=51MHz, low-side LO 12 RF Frequency (MHz) Conversion Loss vs RF Freq vs Temperature LO = 0 dBm, IF=201MHz, low-side LO Conversion Loss vs RF Frequency vs LO Power LO = 0dBm,IF=301MHz, low-side LO 12 Conversion Loss (dB) Conversion Loss (dB) 12 10 10 Conversion Loss (dB) 10 8 8 8 6 6 -40°C 4 1600 +85°C +25°C +25°C -40°C +85°C 6 +25°C -40°C +85°C 4 1600 1800 2000 2200 2400 2600 2800 3000 3200 1800 2000 2200 2400 2600 2800 3000 3200 4 1600 1800 2000 2200 2400 2600 2800 3000 3200 RF Frequency (MHz) RF Frequency (MHz) Conversion Loss vs RF Freq vs LO Power +25° C,IF=201MHz, low-side LO RF Frequency (MHz) Conversion Loss vs RF Frequency vs LO Power +25° C,IF=301MHz, low-side LO 12 Conversion Loss vs RF Frequency vs LO Power +25° C,IF=51MHz, low-side LO Conversion Loss (dB) 12 12 Conversion Loss (dB) 10 Conversion Loss (dB) 10 8 6 4 1600 LO = -2 dBm LO = 4 dBm LO = 0 dBm 10 8 LO = 0 dBm LO = -2 dBm LO = 4 dBm 8 LO = 0 dBm LO = -2 dBm LO = 4 dBm 6 6 4 1600 1800 2000 2200 2400 2600 2800 3000 3200 1800 2000 2200 2400 2600 2800 3000 3200 4 1600 1800 2000 2200 2400 2600 2800 3000 3200 RF Frequency (MHz) RF Frequency (MHz) RF Frequency (MHz) Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • W eb site: www.wj.com , www.TriQuint.com Page 2 of 4 July 2008 ML485 LO = 0 dBm, IF=51MHz, low-side LO 1.6–3.2 GHz High IP3 Mixer with Integrated LO Amp Typical Downconversion Performance Plots (cont’d) Performance using the circuitry on the ML485-PCB Evaluation Board Input IP3 vs RF Frequency vs Temperature 40 40 Input IP3 vs RF Frequency vs Temperature LO = 0 dBm, IF=201MHz, low-side LO 40 38 Input IP3 vs RF Frequency vs Temperature LO = 0 dBm, IF=301MHz, low-side LO Input IP3 (dBm) 38 38 Input IP3 (dBm) 36 34 32 30 28 26 1600 +25°C -40°C +85°C Input IP3 (dBm) 36 34 32 30 28 26 1600 -40°C +85°C +25°C 36 34 32 30 28 +25°C -40°C +85°C 1800 2000 2200 2400 2600 2800 3000 3200 1800 2000 2200 2400 2600 2800 3000 3200 26 1600 1800 2000 2200 2400 2600 2800 3000 3200 RF Frequency (MHz) RF Frequency (MHz) Input IP3 vs RF Frequency vs LO Power +25° C,IF=201MHz, low-side LO 40 38 RF Frequency (MHz) Input IP3 vs RF Frequency vs LO Power +25° C,IF=51MHz, low-side LO Input IP3 vs RF Frequency vs LO Power +25° C,IF=301MHz, low-side LO 40 38 40 38 Input IP3 (dBm) 36 34 32 30 28 26 1600 LO = 0 dBm LO = -2 dBm LO = 4 dBm 36 34 32 30 28 26 1600 LO = -2 dBm LO = 4 dBm LO = 0 dBm 1800 2000 2200 2400 2600 2800 3000 3200 1800 2000 2200 2400 2600 2800 3000 3200 Input IP3 (dBm) Input IP3 (dBm) 36 34 32 30 28 26 1600 LO = 0 dBm LO = -2 dBm LO = 4 dBm 1800 2000 2200 2400 2600 2800 3000 3200 RF Frequency (MHz) RF Return Loss vs RF Frequency +25C, LO = 0 dBm RF Frequency (MHz) RF Frequency (MHz) LO Return Loss vs LO Frequency +25C, LO = 0 dBm IF Return Loss vs IF Frequency +25C, LO = 0 dBm 0 RF Return Loss (dB) -5 -10 -15 -20 -25 -30 1600 IF = 51MHz IF = 201MHz IF = 301MHz IF Return Loss (dB) -5 -10 -15 -20 -25 LO = 1550MHz LO = 1850MHz LO =1650MHz LO = 1950MHz LO = 1750MHz LO = 2050MHz LO Return Loss (dB) 0 0 -5 -10 -15 -20 -25 1600 1800 2000 2200 2400 2600 2800 3000 50 100 150 200 250 300 1800 2000 2200 2400 2600 2800 3000 3200 RF Frequency (MHz) L-R Isolation vs LO Frequency vs Temperature Referenced with LO = 0 dBm 5 IF Frequency (MHz) L-I Isolation vs LO Frequency vs Temperature Referenced with LO = 0 dBm LO Frequency (MHz) R-I Isolation vs LO Frequency vs Temperature Referenced with LO = 0 dBm 20 18 16 14 12 10 8 6 -40°C +85°C +25°C 35 L-R Isolation (dB) L-I Isolation (dB) 4 3 2 1 0 1600 30 25 20 15 10 5 1600 R-I Isolation (dB) -40°C +85°C +25°C -40°C +85°C +25°C 1800 2000 2200 2400 2600 2800 3000 3200 1800 2000 2200 2400 2600 2800 3000 3200 4 1600 1800 2000 2200 2400 2600 2800 3000 3200 LO Frequency (MHz) LO Frequency (MHz) LO Frequency (MHz) Input P1dB vs RF Frequency +25° C, IF = 201MHz, Low-side LO at 0 dBm 21.0 Input P1dB (dBm) 20.5 20.0 19.5 19.0 18.5 18.0 1600 1800 2000 2200 2400 2600 2800 3000 RF Frequency (MHz) Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • W eb site: www.wj.com , www.TriQuint.com Page 3 of 4 July 2008 ML485 1.6–3.2 GHz High IP3 Mixer with Integrated LO Amp Mechanical Information This package is lead-free/green/RoHS-compliant. The plating material on the leads is NiPdAu. It is compatible with both lead-free (maximum 260 °C reflow temperature) and lead (maximum 245 °C reflow temperature) soldering processes. Outline Drawing Product Marking The component will be laser marked with a “M42” product label with an alphanumeric lot code on the top surface of the package. LOT CODE TERMINAL # 1 IDENTIFIER M42 YXX Tape and reel specifications for this part will be located on the website in the “Application Notes” section. ESD / MSL Information Value: Test: Standard: Value: Test: Standard: Passes 200 V to < 250 V Human Body Model (HBM) JEDEC Standard JESD22-A114 Passes 500V Charged Device Model (CDM) JEDEC Standard JESD22-C101 MSL Rating: Level 2 at +260 °C convection reflows Standard: JEDEC Standard J-STD-020 Functional Pin Layout LO 1 2 3 4 8 RF 7 GND 6 GND 5 IF Mounting Configuration / Land Pattern GND GND Vcc Function Vcc RF IF LO GND Pin No. 4 8 5 1 2, 3, 6, 7 Backside paddle is RF and DC ground. Specifications and information are subject to change without notice WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • W eb site: www.wj.com , www.TriQuint.com Page 4 of 4 July 2008