GP30B

GP30A THRU GP30M 3.0 AMPS. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 3.0 Amperes Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 3.0 amperes operation at TA=55oC and with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension DO-201AD Mechanical Data Case: JEDEC DO-201AD molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD- 750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.048 ounce, 1.28 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GP GP Type Number 30A 30B Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 100 50 VDC Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length at TA=55℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @3.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=150℃ Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=55℃ Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range GP 30D 200 140 200 GP 30G 400 280 400 3.0 125 GP 30J 600 420 600 GP 30K 800 560 800 GP Units 30M 1000 V 700 V 1000 V A A I(AV) IFSM VF IR HTIR Cj RθJA TJ,TSTG 1.2 1.1 5.0 100 100 40.0 35 - 65 to + 175 V uA uA uA pF ℃/W ℃ Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. - 572 - RATINGS AND CHARACTERISTIC CURVES (GP30A THRU GP30M) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT. (A) 4 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method AVERAGE FORWARD CURRENT. (A) 100 3 2 1 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 o 0 125 150 175 AMBIENT TEMPERATURE. ( C) 10 1 10 NUMBER OF CYCLES AT 60Hz 100 100 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) Tj=125 0C Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0 10 0M 30 B P 1 1 G P 30 A G -G 0 P3 D -G P3 Tj=75 0C 0.1 Tj=25 0C 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 FORWARD VOLTAGE. (V) 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140 FIG.5- TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE.(pF) Tj=25 0C f=1.0MHz Visg=50 MVp-p 10 1 10 REVERSE VOLTAGE. (V) 100 - 573 -