KBU603G

KBU601G THRU KBU607G Single Phase 6.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes KBU Features UL Recognized File # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 175 amperes peak High temperature soldering guaranteed: 260oC / 10 seconds / .375”, (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0. 3 ounce, 8.0 grams Mounting torque: 5 in. lb. max. Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol KBU KBU KBU Type Number 601G 602G 603G 50 100 200 Maximum Recurrent Peak Reverse Voltage VRRM 35 70 140 Maximum RMS Voltage VRMS 50 100 200 Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current @TA = 65℃ Peak Forward Surge Current, 8.3 ms Single Half Sne-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note 1) (Note 2) Operating Temperature Range Storage Temperature Range KBU KBU KBU KBU Units 604G 605G 606G 607G 400 280 400 6.0 175 1.0 600 420 600 800 1000 560 700 800 1000 V V V A A V uA uA ℃/W I(AV) IFSM VF IR RθJA RθJC ℃ TJ ℃ TSTG Note: 1. Thermal resistance from Junction to Ambient with units in Free Air, P.C.B. Mounted on 0.5" x 0.5” (12mm x 12mm) Copper Pads, 0.375” (9.5mm) Lead Length. 2. Thermal Resistance from Junction to Case with units Mounted on 2" x 3" x 0.25" Al. Plate. 5.0 500 8.6 3.1 -55 to +150 -55 to + 150 - 668 - RATINGS AND CHARACTERISTIC CURVES (KBU601G THRU KBU607G) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 175 6 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 150 125 Tj=25 0C 100 75 50 25 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave 4 2 MOUNTED ON 4X4 INCH COPPER PC BOARD 0.5"(12.7mm) LEAD LENGTH 0 0 50 o 100 100 150 AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) 40 20 10 TJ=125 0C 10 4.0 2.0 1.0 1 TJ=125 0C 0.4 0.2 0.1 .6 8.3ms Single Half Sine Wave TJ=25 0C 0.1 .7 .8 .9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE. (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140 - 669 -