MBR1045CT

MBR1030CT THRU MBR10200CT 10.0 AMPS. Schottky Barrier Rectifiers Voltage Range 30 to 200 Volts Current 10.0 Amperes Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case TO-220 Mechanical Data Cases: JEDEC TO-220A molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=125OC Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at Tc=125oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Symbol VRRM VRMS VDC I(AV) IFRM IFSM IRRM VF IR dV/dt RθJC TJ MBR MBR MBR MBR MBR MBR MBR MBR MBR 1030 1035 1040 1045 1050 1060 1010 1015 1020 CT CT CT CT CT CT 0CT 0CT 0CT Units V V V A A A A 30 21 30 35 24 35 40 28 40 45 31 45 50 35 50 10 32 120 0.5 60 42 60 100 150 200 70 105 140 100 150 200 Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: o (Note 2) IF=5A, TC=25 C o IF=5A, TC=125 C Maximum Instantaneous Reverse Current @ Tc =25℃ at Rated DC Blocking Voltage (Note 2) Voltage Rate of Change (Rated VR) 0.70 0.57 0.1 0.80 0.65 0.85 0.88 0.99 0.75 0.78 0.87 0.8 0.2 V mA V/uS ℃/W ℃ Maximum Typical Thermal Resistance (Note 3) Operating Junction Temperature Range 10,000 1.5 -65 to +150 Storage Temperature Range ℃ TSTG -65 to +175 Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg, Mount on Heatsink Size of 2 in x 3 in x 0.25in Al-Plate. - 128 - RATINGS AND CHARACTERISTIC CURVES (MBR1030CT THRU MBR10200CT) FIG.1- FORWARD CURRENT DERATING CURVE 6 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 180 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) RESISTIVE OR INDUCTIVE LOAD 5 150 Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method 4 120 90 3 60 2 1 0 0 50 100 o CASE TEMPERATURE. ( C) 150 30 0 0.1 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 40 Tj=25 0C MBR1050CT-MBR1060CT FIG.4- TYPICAL REVERSE CHARACTERISTICS 50 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 10 Tj=125 0C MBR1030CT-MBR1045CT 1 MBR10100CT 1 Tj=75 0C 0.1 MBR10150CT 0.1 MBR10200CT Pulse Width=300 s 1% Duty Cycle 0.01 0 0.01 Tj=25 0C 0.001 0 0.1 0.2 0.3 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE. (V) 0.4 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 5,000 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG 100 1,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p TRANSIENT THERMAL IMPEDANCE. ( OC/W) 100 JUNCTION CAPACITANCE.(pF) 10.0 500 1 100 0.1 1.0 10 REVERSE VOLTAGE. (V) 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) 10 100 - 129 -