P4KE300A

CREAT BY ART P4KE SERIES 400 Watts Transient Voltage Suppressor DO-41 Pb RoHS COMPLIANCE Features UL Recognized File # E-326243 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 400 watts surge capability eith a 10 / 1000 us waveform Excellent clamping capability Low Dynamic impedance Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260 ℃ / 10 seconds / .375",(9.5mm) lead length / 5lbs., (2.3kg) tension Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: Molded plastic Lead: Pure tin plated lead free, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.3 gram Dimensions in inches and (millimeters) Marking Diagram P4KEXX G Y M = Specific Device Code = Green Compound = Year = Work Month Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Peak Power Dissipation at TA=25℃, Tp=1ms(Note 1) Steady State Power Dissipation at TL=75℃ Lead Lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)(Note 3) Maximum Instantaneous Forward Voltage at 25.0A for Unidirectional Only (Note 4) Operating and Storage Temperature Range Symbol PPK PD Value Minimum 400 1 Unit Watts Watts IFSM 40 Amps VF TJ, TSTG 3.5 / 6.5 -55 to +175 Volts ℃ Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25℃ Per Fig. 2 Note 2: Mounted on 40 x 40 x 1 mm Copper Pads to Each Terminal Note 3: 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum Note 4: VF=3.5V for Devices of VBR≦200V and VF=6.5V Max. for Device VBR>200V Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types PS4KE6.8 through Types P4KE440 2. Electrical Characterstics Apply in Both Directions Version:F11 RATINGS AND CHARACTERISTIC CURVES (P4KE SERIES) FIG. 1 PEAK PULSE POWER RATING CURVE 100 1.25 PPPM, PEAK PULSE POWER, KW PM(AV), STEADY STATE POWER DISSIPATION,WATTS NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA= 25℃ FIG.2 STEADY STATE POWER DERATING CURVE 1 With heat sink PULSE Without heat sink 10 0.75 0.5 1 0.25 0.1 0.1 1 10 100 tp, PULSE WIDTH, (uS) 1000 10000 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE (oC) FIG. 3 CLAMPING POWER PULSE WAVEFORM 140 PEAK PULSE CURRENT (%) 120 100 80 60 40 20 td 0 0 0.5 1 1.5 2 t, TIME ms 2.5 3 3.5 4 0 1 PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM 50 FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 8.3mS Single Half Sine Wave JEDEC Method Peak Value IPPM Half Value-IPPM/2 10/1000sec, WAVEFORM as DEFINED by R.E.A. IFSM, PEAK FORWARD SURGE A CURRENT (A) tr=10usec 40 30 20 10 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 5 TYPICAL JUNCTION CAPACITANCE 100000 CJ, JUNCTION CAPACITANCE (pF) A 10000 VR=0 1000 MEASURED at STAND-OFF VOLTAGE,Vwm 100 TA=25℃ f=1.0MHz Vsig=50mVp-p 10 1 10 V(BR), BREAKDOWN VOLTAGE (V) 100 Version:F11 ELECTRICAL CHARACTERISTICS (TA=25 ℃ unless otherwise noted) Breakdown Voltage General Part Number Nominal Voltage (Note 1) VBR (V) Min P4KE6.8 P4KE6.8A P4KE7.5 P4KE7.5A P4KE8.2 P4KE8.2A P4KE9.1 P4KE9.1A P4KE10 P4KE10A P4KE11 P4KE11A P4KE12 P4KE12A P4KE13 P4KE13A P4KE15 P4KE15A P4KE16 P4KE16A P4KE18 P4KE18A P4KE20 P4KE20A P4KE22 P4KE22A P4KE24 P4KE24A P4KE27 P4KE27A P4KE30 P4KE30A P4KE33 P4KE33A P4KE36 P4KE36A P4KE39 P4KE39A P4KE43 P4KE43A P4KE47 P4KE47A P4KE51 P4KE51A P4KE56 P4KE56A P4KE62 P4KE62A P4KE68 P4KE68A P4KE75 P4KE75A P4KE82 P4KE82A P4KE91 P4KE91A 6.8 6.8 7.5 7.5 8.2 8.2 9.1 9.1 10 10 11 11 12 12 13 13 15 15 16 16 18 18 20 20 22 22 24 24 27 27 30 30 33 33 36 36 39 39 43 43 47 47 51 51 56 56 62 62 68 68 75 75 82 82 91 91 6.12 6.46 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 (V) Max 7.48 7.14 8.25 7.88 9.02 8.61 10.00 9.55 11.00 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 1000 1000 500 500 200 200 50 50 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Test Current IT (mA) Stand-Off Voltage VWM (V) Maximum Maximum Maximum Maximum Reverse Leakage Peak Pulse Clamping Voltage Temperature @ VWM Current @ IPPM Coefficient IPPM ID Vc of VBR (uA) (A) (Note 2) 38.0 40.0 35.0 37.0 33.0 34.0 30.0 31.0 28.0 29.0 26.0 27.0 24.0 25.0 22.0 23.0 19.0 20.0 17.8 18.6 16.0 16.5 14.0 15.0 13.0 13.7 12.0 12.6 10.7 11.0 9.6 10.0 8.8 9.0 8.0 8.4 7.4 7.7 6.7 7.0 6.2 6.4 5.7 6.0 5.2 5.4 4.7 5.0 4.2 4.5 3.8 4.0 3.5 3.7 3.2 3.3 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 Version:F11 (V) (%/℃) ELECTRICAL CHARACTERISTICS (TA=25 ℃ unless otherwise noted) Breakdown Voltage General Part Number Nominal Voltage (Note 1) VBR (V) Min P4KE100 P4KE100A P4KE110 P4KE110A P4KE120 P4KE120A P4KE130 P4KE130A P4KE150 P4KE150A P4KE160 P4KE160A P4KE170 P4KE170A P4KE180 P4KE180A P4KE200 P4KE200A P4KE220 P4KE220A P4KE250 P4KE250A P4KE300 P4KE300A P4KE350 P4KE350A P4KE400 P4KE400A P4KE440 P4KE440A 100 100 110 110 120 120 130 130 150 150 160 160 170 170 180 180 200 200 220 220 250 250 300 300 350 350 400 400 440 440 90 95 99 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 332 360 380 396 418 (V) Max 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462.0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Test Current IT (mA) Stand-Off Voltage VWM (V) Maximum Maximum Maximum Maximum Reverse Leakage Peak Pulse Clamping Voltage Temperature @ VWM Current @ IPPM Coefficient IPPM ID Vc of VBR (uA) (A) (Note 2) 2.9 3.0 2.6 2.7 2.4 2.5 2.2 2.3 1.9 2.0 1.8 1.9 1.7 1.8 1.6 1.7 1.4 1.51 1.20 1.30 1.10 1.20 0.97 1.00 0.83 0.87 0.73 0.76 0.66 0.69 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 600 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 (V) (%/℃) Notes: 1. VBR measure after I T applied for 300us, I T=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2. 3. For bipolar types having V WM of 10 volts and under, the I D limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35. Version:F11