RGP10A THRU RGP10M
1.0 AMP. Glass Passivated Junction Fast Recovery Rectifiers
Voltage Range 50 to 1000 Volts Current 1.0 Ampere
Features
High temperature metallurgically bonded constructed Plastic material used carries Underwriters Laboratory Classification 94V-0 Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.0 ampere operation at TA=55oC with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: o 350 C / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs., (2.3kg) tension Fast switching for high efficiency
DO-41
Mechanical Data
Case: JEDEC DO-41 molded plastic over glass body Lead: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.012 ounce, 0.3 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol RGP RGP RGP RGP RGP RGP RGP Units Type Number
10A
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) Lead Length @ T A = 5 5℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=150℃ Maximum Reverse Recovery Time ( Note 1 ) TJ=25℃ Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range
10B
10D
10G
10J
10K
10M
VRRM VRMS VDC I(AV) IFSM VF IR Trr Cj RθJA TJ
50 35 50
100 70 100
200 140 200
400 280 400 1.0 30.0 1.3 5.0 200
600 420 600
800 1000 560 700 800 1000
V V V A A V uA uA
150
250 15 65 -65 to + 175 -65 to + 175
500
nS pF ℃/W ℃ ℃
TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A Recover to 0.25A. 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts. 3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
- 574 -
RATINGS AND CHARACTERISTIC CURVES (RGP10A THRU RGP10M)
FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr
NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms
-1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm
FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT. (A)
1.0 RESISTIVE OR INDUCTIVE LOAD 10
FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
0.5
INSTANTANEOUS FORWARD CURRENT. (A)
0.75
1
0.25 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 125
o
150
175
AMBIENT TEMPERATURE. ( C)
0.1
Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE
0
PEAK FORWARD SURGE CURRENT. (A)
FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
30
Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method
20
0.01 0.4
0.6
0.8 1.0 1.2 FORWARD VOLTAGE. (V)
1.4
1.6
FIG.6- TYPICAL REVERSE CHARACTERISTICS
10 20 10
1
10 NUMBER OF CYCLES AT 60Hz
100
INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
0
Tj=125 0C
FIG.4- TYPICAL JUNCTION CAPACITANCE
100
1
JUNCTION CAPACITANCE.(pF)
Tj=75 0C
0.1
Tj=25 0C
10
Tj=25 0C
0.01 0 1 10 REVERSE VOLTAGE. (V) 100
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
- 575 -
很抱歉,暂时无法提供与“RGP10B”相匹配的价格&库存,您可以联系我们找货
免费人工找货