RGP30A THRU RGP30M
3.0 AMPS. Glass Passivated Junction Fast Recovery Rectifiers
Voltage Range 50 to 1000 Volts Current 3.0 Amperes
Features
High temperature metallurgically bonded constructed Plastic material used carries Underwriters Laboratory Classification 94V-0 Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 3.0 ampere operation at TA=55oC with no thermal runaway Typical IR less than 0.2 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs., (2.3kg) tension Fast switching for high efficiency
DO-201AD
Mechanical Data
Case: JEDEC DO-201AD molded plastic over glass body Lead: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.048 ounce, 1.28 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol RGP RGP RGP RGP RGP RGP RGP Units Type Number
30A
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) Lead Length @ T A = 5 5℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 3.0A Maximum DC Reverse Current@ TA=25℃ at Rated DC Blocking Voltage @TA=125℃
Maximum Reverse Recovery Time ( Note 1 ) TJ=25℃
30B
30D
30G
30J
30K
30M
VRRM VRMS VDC I(AV) IFSM VF IR Trr Cj RθJA
50 35 50
100 70 100
200 140 200
400 280 400 3.0 125 1.3 5.0 100
600 420 600
800 1000 560 700 800 1000
V V V A A V uA uA
150
250 40 30 -65 to + 175
500
nS pF ℃/W ℃
Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating & Storage Temperature Range
TJ , TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A Recover to 0.25A. 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts. 3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B.
- 580 -
RATINGS AND CHARACTERISTIC CURVES (RGP30A THRU RGP30M)
FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr
NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms
-1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm
FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT. (A)
4.0 RESISTIVE OR INDUCTIVE LOAD 10
FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
3.0
2.0
INSTANTANEOUS FORWARD CURRENT. (A)
1
1.0 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100
o
Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE
0
125
150
175
LEAD TEMPERATURE. ( C)
0.1
PEAK FORWARD SURGE CURRENT. (A)
200
FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method
100
0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V)
FIG.6- TYPICAL REVERSE CHARACTERISTICS
20 10 0 Tj=125 0C
NUMBER OF CYCLES AT 60Hz
INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
1
10
100
FIG.4- TYPICAL JUNCTION CAPACITANCE
100
Tj=100 0C 1
JUNCTION CAPACITANCE.(pF)
Tj=25 0C f=1.0MHz Vsig=50mVp-p
Tj=75 0C
0.1 Tj=25 0C
10 1
10 REVERSE VOLTAGE. (V)
100
0.01 0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
- 581 -
很抱歉,暂时无法提供与“RGP30A”相匹配的价格&库存,您可以联系我们找货
免费人工找货