S1DB

S1AB THRU S1MB 1.0 AMP. Surface Mount Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere Features For surface mounted application Glass passivated junction chip. Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-O High temperature soldering: 260oC / 10 seconds at terminals .082(2.08) .076(1.93) SMB/DO-214AA .147(3.73) .137(3.48) .187(4.75) .167(4.25) .012(.31) .006(.15) .103(2.61) .078(1.99) .012(.31) .006(.15) .056(1.41) .035(0.90) .208(5.28) .200(5.08) .008(.20) .004(.10) Mechanical Data Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Packaging: 12mm tape per EIA STD RS-481 Weight: 0.093 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol S1 S1 Type Number AB BB Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC Maximum Average Forward Rectified Current @TL =110℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA =25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating Temperature Range S1 DB S1 GB S1 JB S1 KB S1 Units MB 200 400 600 800 1000 140 280 420 560 700 200 400 600 800 1000 1.0 30 1.1 5 50 30 12 -55 to +150 -55 to +150 V V V A A V uA uA ℃/W pF ℃ ℃ I(AV) IFSM VF IR RθJL Cj TJ Storage Temperature Range TSTG Notes: 1. Measured at 1 MHz and Applied VR=4.0 Volts 2. Measured on P.C. Board with 0.27 x 0.27” (7.0 x 7.0mm) Copper Pad Areas. - 494 - RATINGS AND CHARACTERISTIC CURVES (S1AB THRU S1MB) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 1.2 1.0 100 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 0.8 20 10 0.6 0.4 5 8.3ms Single Half Sine Wave Tj=Tj max 1 2 5 10 20 50 100 0.2 .20IN (5.0mm ) x 0.5mil inches(0.013mm) Thick Copper Pad Areas 2 2 2 1 0 0 20 40 60 80 100 o 120 140 160 LEAD TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL FORWARD CHARACTERISTICS 100 50 FIG.4- TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) 20 10 5 2 1.0 0.5 0.2 0.1 0.05 0.02 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2 10 1 Tj=125 0C Tj=75 0C 0.1 Tj=25 0C 0.01 0.001 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140 FORWARD VOLTAGE. (V) FIG.5- TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE.(pF) 50 Tj=25 0C f=1.0MHz Vsig=50mVp-p 20 10 5 2 1 0.01 0.1 1 REVERSE VOLTAGE. (V) 10 100 - 495 -