TS358CDC3

TS358 Single Supply Dual Operational Amplifiers SOP-8 DIP-8 Pin assignment: 1. Output A 8. Vcc 2. Input A (-) 7. Output B 3. Input A (+) 6. Input B (-) 4. Gnd 5. Input B (+) General Description Utilizing the circuit designs perfected for recently introduced Quad Operational Amplifiers, these dual operational amplifiers have several distinct advantages over standard operational amplifier types in single supply applications. They can operate at supply voltages as low as 3.0 Volts or as high as 32 Volts with quiescent currents about one fifth of those associated with the LM741 (on a pet amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The TS358 is equivalent to one half of TS324, and output voltage range also includes the negative supply voltage. Features ● ● ● ● ● ● ● ● Short circuit protected outputs True differential input stage Single supply operation: 3V to 32V Low input bias currents Internally compensated Common mode range extends to negative supply Single and split supply operation Similar performance to the popular MC1558 Block Diagram Ordering Information Part No. TS358CD C3 TS358CS RL Package DIP-8 SOP-8 Packing 50pcs / Tube 2.5Kpcs / 13” Reel Absolute Maximum Rating Parameter Supply Voltage Differential Input Voltage (Split Power Supplies) Input Common Mode Voltage Range (note 1) Input Forward Current (note 2) Output Short Circuit Duration Operating Junction Temperature Range Symbol VCC VIDR VICR IIF tsc TJ Limit +32 or ±16 32 -0.3 to 32 50 Continuous 0 ~ +70 Unit V V V mA o o C Storage Temperature Range TSTG -65 ~ +150 C Note 1: For supply, voltages less than 32V for the TS358 the absolute maximum input voltage is equal to the supply voltage. Note 2: This input current will only exist when the voltage is negative at any of the input leads. Normal output states will reestablish when the input voltage returns to a voltage greater than -0.3V. 1 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers Electrical Characteristics (VCC = 5V, Ta=25oC; unless otherwise specified.) Characteristics Input Offset Voltage VCC= 5.0V to 30V, VIC= 0V to Vcc -1.7 V, Vo= 1.4V, RS= 0Ω TLOW ≤ Ta ≤THIGH Average Temperature Coefficient of Input Offset Voltage Input Offset Current TLOW ≤ Ta ≤THIGH Average Temperature Coefficient of input Offset Current Input Bias Current TLOW ≤ Ta ≤THIGH Input Common-Mode Voltage Range) VCC = 30 V (Note1) VCC = 30 V, TLOW ≤ Ta ≤THIGH Differential Input Voltage Range Large Signal Open-Loop Voltage Gain RL = 2.0K, VCC =15V, For Large VO Swing, TLOW ≤ Ta ≤THIGH Channel Separation 1.0 KHz to 20KHz Common Mode Rejection Ratio R S ≤ 10 kΩ Power Supply Rejection Ratio Output Voltage Range, RL = 2KΩ Output Voltage -- High Limit VCC = 30 V, RL = 2 kΩ VCC = 30 V, RL = 10 kΩ Output Voltage -- Low Limit VCC = 5.0 V, RL = 10 kΩ Output Source Current VID=+1.0V,VCC=15V Output Sink Current VID = -1.0 V, VCC = 15 V VID = -1.0 V, VO = 200 mV Output Short Circuit to Ground (Note 2) Power Supply Current , VCC = 30 VVO = 0 V, RL = ∞ VCC = 5.0 V, VO = 0 V, RL = ∞ Notes : Symbol Vio ΔIio/ΔT Iio ΔIio/ΔT IIB VICR VIDR AVOL -CMRR PSRR VOR VOH VOL IO+ I OIOS ICC Min --------0 0 -25 15 -65 65 0 26 27 -20 10 12 ---- Typ 2.0 -7.0 5.0 -10 -45 -50 ---100 --120 70 100 --28 5.0 40 20 50 40 1.5 0.7 Max 7.0 9.0 -50 150 --250 -500 28.3 28 VCC -----3.3 --20 ---60 3.0 1.2 Unit mV uV/ C nA pA/ C nA o o V V V/mV dB dB dB V V mV mA mA uA mA mA 1. The input common mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of the common mode voltage range is Vcc 17V, but either or both inputs can go to +32V. 2. Short circuits from the output to Vcc can cause excessive heating and eventual destruction. Destructive dissipation can recruit from simultaneous shorts on all amplifiers. 2 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers Electrical Characteristics Curve (Ta=25oC; unless otherwise specified.) Figure 1. Large Signal Voltage Follower Response Figure 2. Input Voltage Range Figure 3. Open Loop Frequency Figure 4. Large Signal Frequency Response Figure 5. Small-Signal Voltage Follower Pulse Response (Noninverting) Figure 6. Power Supply Current vs. Supply Voltage 3 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers Application Description The TS358 made using two internally compensated, two-stage operational amplifiers. The first stage performs not only the first stage gain function but also performs the level shifting and transconductance reduction functions. By reducing the transconductance, a smaller compensation capacitor (only 5.0pF) can be employed, thus saving chip area. Another feature of this input stage is that the input common mode range can include the negative supply or ground, in single supply operation, without saturating either the input devices or the differential to single-ended converter. The second stage consists of a standard current source load amplifier stage. Each amplifier is biased from an internal-voltage regulator, and which has a low temperature coefficient thus giving each amplifier good temperature characteristics as well as excellent power supply rejection. Figure 7. Voltage Reference Figure 8. Wien Bridge Oscillator Figure 9. Bi-Quad Filter 4 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers Application Description (Continue) Figure 10. High Impedance Differential Amplifier Figure 11. Comparator with Hysteresis Figure 12. Function Generator Figure 13. Multiple Feedback Bandpass Filter 5 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers SOP-8 Mechanical Drawing DIM A B C D F G K M P R SOP-8 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX. 4.80 5.00 0.189 0.196 3.80 4.00 0.150 0.157 1.35 1.75 0.054 0.068 0.35 0.49 0.014 0.019 0.40 1.25 0.016 0.049 1.27BSC 0.05BSC 0.10 0.25 0.004 0.009 0º 7º 0º 7º 5.80 6.20 0.229 0.244 0.25 0.50 0.010 0.019 Marking Diagram Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code 6 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers DIP-8 Mechanical Drawing DIM A B C D G J K L M DIP-8 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 9.07 9.32 0.357 0.367 6.22 6.48 0.245 0.255 3.18 4.45 0.125 0.135 0.35 0.55 0.019 0.020 2.54 (typ) 0.10 (typ) 0.29 0.31 0.011 0.012 3.25 3.35 0.128 0.132 7.75 8.00 0.305 0.315 o o 10 10 Marking Diagram Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code 7 /8 Version: A09 TS358 Single Supply Dual Operational Amplifiers Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 8 /8 Version: A09