TS9013_11

TS9013 500mA Low Quiescent Current CMOS LDO SOT-89 Pin Definition: 1. Ground 2. Input 3. Output SOT-223 Pin Definition: 1. Input 2. Ground 3. Output General Description TS9013 is a positive voltage regulator developed utilizing CMOS technology featured very low power consumption, low dropout voltage and high output voltage accuracy. Built in low on-resistor provides low dropout voltage and large output current. A 2.2uF or greater can be used as an output capacitor. TS9013 are prevented device failure under the worst operation condition with both thermal shutdown and current fold-back. These series are recommended for configuring portable devices and large current application, respectively. Features ● ● ● ● ● Output current up to 500mA Low power consumption, 15uA(typ) @Vo=5V Output voltage ±2% Internal current limit Thermal shutdown protection Ordering Information Part No. Package Packing TS9013xCW RP SOT-223 2.5Kpcs / 13” Reel TS9013xCW RPG SOT-223 2.5Kpcs / 13” Reel TS9013xCY RM SOT-89 1Kpcs / 7” Reel TS9013xCY RMG SOT-89 1Kpcs / 7” Reel Note: Where x denotes voltage option, available are D=1.8V, K=2.5V, S=3.3V, 5=5.0V “G” denotes for Halogen Free Applications ● ● ● ● ● Palmtops Video recorders Battery powered equipment PC peripherals CD-ROM, DVD ROM Digital signal camera ● Block Diagram Typical Application Circuit 1/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO Absolute Maximum Rating Parameter Input Supply Voltage Output Current Power Dissipation (without heat sink) Operating Junction Temperature Range Storage Temperature Range o Symbol VIN Io SOT-89 SOT-223 PD Tj TSTG Limit 6.5 500 0.5 0.7 -40 ~ +150 -65 ~ +150 Unit V mA W o o C C Lead Soldering Temperature (260 C) 5 Notes: Stress above the listed absolute rating may cause permanent damage to the device. S Electrical Characteristics (Ta = 25oC unless otherwise noted) Parameter Conditions TS90135 VIN=Vo + 1V, Io =1mA, Output Voltage VIN=Vo + 1V, Io =1mA ~ 500mA Maximum Output Current Input Stability VIN=Vo+1V, VO+1V ≤ Vin ≤ VO+2V, Io=1mA VIN=Vo+1V, Load Regulation (Note1) 1mA ≤ IL ≤ 500mA VIN=Vo+1V, 1mA ≤ IL ≤ 500mA Io=300mA Dropout Voltage (Note 2) Io=500mA Io=500mA Quiescent Current Output Current Limit Power Supply Rejection Ratio Output Voltage Temperature VIN=Vo+1V, Io=0A VOUT < 0.4V At f=100KHz, Io=10mA TS90135 TS9013S TS9013K TS9013D TS90135 TS9013S TS90135 TS9013S TS9013K TS9013D TS9013S TS9013K TS9013D TS90135 TS9013S TS9013K TS9013D Min 4.90 3.23 2.45 1.76 4.85 3.20 2.42 1.74 500 -------550 -- Typ 5.0 3.3 2.5 1.8 5.0 3.3 2.5 1.8 -0.2 40 40 300 500 600 15 -30 Max 5.10 3.36 2.55 1.83 5.10 3.36 2.55 1.83 -0.3 80 Unit V V mA % mV 90 500 600 850 25 --uA mA dB o mV -100 -ppm/ C Coefficient (Note 3) Notes: a. Regulation is measured at constant junction temperature, using pulsed ON time. b. Dropout is measured at constant junction temperature, using pulsed ON time, and the criterion is VOUT inside target value +/-3%. 2/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO SOT-89 Mechanical Drawing DIM A B C D E F G H I J SOT-89 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.40 4.60 0.173 0.181 1.40 1.75 0.055 0.069 2.40 2.60 0.094 0.102 0.36 0.48 0.014 0.018 1.40 1.60 0.054 0.063 2.90 3.10 0.114 0.122 0.89 1.20 0.035 0.047 -4.25 -0.167 1.40 1.60 0.055 0.068 0.38 0.43 0.014 0.017 Marking Diagram Y M = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Fixed Output Voltage Code D=1.8V, K=2.5V, S=3.3V, 5=5.0V. L X 3/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO SOT-223 Mechanical Drawing DIM A B C D E F G H I J K SOT-223 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 6.350 6.850 0.250 0.270 2.900 3.100 0.114 0.122 3.450 3.750 0.136 0.148 0.595 0.635 0.023 0.025 4.550 4.650 0.179 0.183 2.250 2.350 0.088 0.093 0.835 1.035 0.032 0.041 6.700 7.300 0.263 0.287 0.250 0.355 0.010 0.014 10° 16° 10° 16° 1.550 1.800 0.061 0.071 Marking Diagram Y M = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Fixed Output Voltage Code 18=1.8V, 25=2.5V, 33=3.3V, 50=5.0V. L X 4/5 Version: E11 TS9013 500mA Low Quiescent Current CMOS LDO Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 5/5 Version: E11