CS03W5F100MT5E

DATA SHEET Product Name Automotive Low Resistance Thick Film Chip Resistors Part Name CS Series Uniroyal Electronics Global Co., Ltd. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel Email Manufacture Plant +86 512 5763 1411 / 22 /33 marketing@uni-royal.cn Uniroyal Electronics Industry (kunshan) co., ltd. Uniroyal Electronics Industry Co., Ltd. Uniroyal Electronics Global Co.,Ltd Shenzhen Branch Aeon Technology Corporation Uniroyal Electronics Global Co.,Ltd Xiamen Branch Kunshan Foss Electronic material Co., Ltd. Royal Electronic Factory (thailand) co., ltd Brands RoyalOhm UniOhm Automotive Low Resistance Thick Film Chip Resistors - Data Sheet 1. Scope: 1.1 This specification for approve relates to the Automotive Low Resistance Thick Film Chip Resistors manufactured by UNI-ROYAL. 1.2 Ultra-low Value 1.3 Low Temperature Coefficient 1.4 Suitable for reflow & wave soldering 1.5 Application：Power supply 1.6 The test items follow the test standard of AEC-Q200. 2. Part No. System Part No. includes 14 codes shown as below: 2.1 1st~4th codes: Part name. E.g.: CS02,CS03,CS05,CS06,CS07,CS10,CS11,CS12 2.2 5th~6th codes: Power rating. E.g.: W=Normal Size “1~G” = “1~16” Wattage 1/32 3/4 1/2 1/3 1/4 1/8 1/10 1/16 1/20 1 Normal Size WH 07 W2 W3 W4 W8 WA WG WM 1W If power rating is lower or equal than 1 watt, 5th code would be “W” and 6th code would be a number or letter. E.g.: WA=1/10W W4=1/4W 2.3 7th code: Tolerance. E.g.: D=±0.5% F=±1% G=±2% J=±5% K= ±10% 2.4 8th~11th codes: Resistance Value. 2.4.1 If value belongs to standard value of ≥5% series, 8th code would be zero,9th~10th codes are significant figures of the resistance and 11th code is the power of ten. 2.4.2 If value belongs to standard value of ≤2% series, 8th~10th codes are significant figures of the resistance, and 11th code is the power of ten. 2.4.3 11th codes listed as following: 0=100 1=101 2=102 3=103 4=104 5=105 6=106 J=10-1 K=10-2 L=10-3 M=10-4 th th 2.5 12 ~14 codes. 2.5.1 12th code: Packaging Type. E.g.: C=Bulk T=Tape/Reel 2.5.2 13th code: Standard Packing Quantity. 4=4000pcs 5=5000pcs C=10000pcs D=20000pcs E=15000pcs Chip Product: BD=B/B-20000pcs TC=T/R-10000pcs 2.5.3 14th code: Special features. E = Environmental Protection, Lead Free, or Standard type. 3. Ordering Procedure (Example: CS12 1W ±1% 0.018Ω T/R-4000) C S 1 2 Product Type: Fill-in 4 digits with the chip resistor type as follows: CS02 CS03 CS05 CS06 CS07 CS10 CS11 CS12 1 W F Wattage: Normal size: WA=1/10W W8=1/8W W4=1/4W W5=1/5W W3=1/3W W2=1/2W 07=3/4W 1W=1W 1 8 0 M T Resistance Value: 5%(E-24 series): The 1st digit will be “0”; the 2nd & 3rd digits are for the significant figures of the resistance and the 4th digit indicate the numbers of zeros following. 1%(E-96 series ): The 1st to 3rd digits are for the significant figures of the resistance and 4th digit denotes number of zeros following. 4 Packing quantity: 1=1000PCS 2=2000PCS 3=3000PCS 4=4000PCS 5=5000PCS C=10000PCS D=20000PCS J=10-1; K=10-2; L=10-3;M=10-4 Tolerance: F=±1% ; J=±5% Feb.16,2019 V.3 E Special Feature E= Lead-Free Packing Type: T=Tape/Reel www.uniohm.com Page 2/8 Automotive Low Resistance Thick Film Chip Resistors - Data Sheet 4. Marking: (1) For CS02 size. Due to the very CS02 small size of the resistor’sbody, there is no marking on the body. (2) For CS03 size: Below 100mΩ（do not contain） product 3 digits of ±1%,5%Tolerance , show as following： 056 0.056Ω (3) For CS03 size: Above( contain) 100mΩ product: 3 digits, the first digit is “R＂, which as decimal point, the 2nd & 3rd digits are significant. R10 100mΩ (4) ±1%,5%Tolerance: product below 1Ω show as following, the first digit is “R＂, which as decimal point. R05050mΩ (5) ±1%,5%Tolerance: product of 1Ω show as following, the first digit is “1”, read alphabet “R”as decimal point. 1R00 1Ω 5. Dimension Type Dimension(mm) L W H A B CS02(0402) 1.00±0.10 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 CS03(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.30±0.20 CS05(0805) 2.00±0.15 1.25+0.15/-0.10 0.55±0.10 0.40±0.20 0.40±0.20 CS06(1206) 3.10±0.15 1.55+0.15/-0.10 0.55±0.10 0.45±0.20 0.45±0.20 CS07(1210) 3.10±0.10 2.60±0.20 0.55±0.10 0.50±0.25 0.50±0.20 CS10(2010) 5.00±0.10 2.50±0.20 0.55±0.10 0.60±0.25 0.50±0.20 CS11(1812) 4.50±0.20 3.20±0.20 0.55±0.20 0.50±0.20 0.80±0.30 CS12(2512) 6.35±0.10 3.20±0.20 0.55±0.10 0.60±0.25 0.80±0.30 6. Resistance Range Type Power Rating at 70℃ Dielectric withstanding Voltage Resistance Range 1%&5% Operating Temperature CS02 1/8W 100V 50mΩ~1Ω -55℃~155℃ CS03 1/5W 300V 10mΩ~1Ω -55℃~155℃ CS05 1/4W 500V 10mΩ~1Ω -55℃~155℃ CS06 1/3W 500V 10mΩ~1Ω -55℃~155℃ CS07 1/2W 500V 10mΩ~1Ω -55℃~155℃ CS10 3/4W 500V 10mΩ~1Ω -55℃~155℃ CS11 3/4W 500V 10mΩ~1Ω -55℃~155℃ CS12 1W 500V 10mΩ~1Ω -55℃~155℃ Feb.16,2019 V.3 www.uniohm.com Page 3/8 Automotive Low Resistance Thick Film Chip Resistors - Data Sheet 7. Recommend the size of welding plate Type CS02 CS03 CS05 CS06 CS07 CS10 CS11 CS12 A 0.5±0.05 0.8±0.05 1.0±0.1 2.0±0.1 2.0±0.1 3.6±0.1 2.9±0.1 4.4±0.1 Dimension(mm) B C 0.5±0.05 0.6±0.05 1±0.05 0.9±0.05 1±0.1 1.4±0.1 1.1±0.1 1.8±0.1 1.1±0.1 2.9±0.1 1.4±0.1 3±0.1 1.5±0.1 3.7±0.1 2.1±0.1 3.7±0.1 D 1.5±0.05 2.7±0.05 3.4±0.1 4.2±0.1 4.2±0.1 6.4±0.1 5.9±0.1 8.6±0.1 8. Derating Curve Resistors shall have a power rating based on continuous load operation at an ambient temperature from -55℃ to 70℃. For temperature in excess of 70℃, the load shall be derated as shown in figure 1 Figure 1 Voltage rating: Resistors shall have a rated direct-current (DC) continuous working Voltage or an approximate sine-wave root-mean-square (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: RCWV = P  R Where: RCWV commercial-line frequency and waveform (Volt.) P = power rating (WATT.) R = nominal resistance (OHM) In no case shall the rated DC or RMS AC continuous working voltage be greater than the applicable maximum value. The overload voltage is 2.5 times RCWV or Max. Overload voltage whichever is less 9. Structure Feb.16,2019 V.3 www.uniohm.com Page 4/8 Automotive Low Resistance Thick Film Chip Resistors - Data Sheet 10. Performance Specification Characteristic Limits Operational life ±1%: ±(1.0%+0.005) Max. ±5%: ±(3.0%+0.005) Max. Electrical Characterization CS02： 50mΩ≤R