GBJ2006

GBJ2001 THRU GBJ2007 SINGLE PHASE 20.0 AMP BRIDGE RECTIFIERS VOLTAGE RANGE 50 to 1000 Volts CURRENT 20.0 Amperes GBJ 1.193(30.3) 1.169(29.7) .134(3.4) .122(3.1) .203(5.2) .189(4.8) .150(3.8) .134(3.4) .441(11.2) .425(10.8) FEATURES * Ideal for printed circuit board * Low forward voltage * Low leakage current * Mounting position: Any .094(2.4) .078(2.0) .043(1.1) .035(0.9) ~ ~ .165(4.2) .150(3.8) .708(18.0) .669(17.0) .800(20.3) .776(19.7) .189 (4.8) .402(10.2) .303(7.7) .303(7.7) SPACING .386(9.8) .287(7.3) .287(7.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. + .114(2.9) .098(2.5) .031(0.8) .023(0.6) Dimensions in inches and (millimeters) TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current @Tc=100 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage Drop per Bridge Element at 10.0A D.C. Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) Typical Thermal Resistance RqJC (Note 2) Operating Temperature Range, TJ Storage Temperature Range, TSTG NOTES: GBJ2001 GBJ2002 GBJ2003 GBJ2004 GBJ2005 GBJ2006 GBJ2007 UNITS 50 35 50 100 70 100 200 140 200 400 280 400 20.0 240 1.05 10 500 60 0.8 -55 -55 +150 +150 600 420 600 800 560 800 1000 700 1000 V V V A A V A A PF C/W C C Ta=125 C 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance from Junction to Case with device mounted on 300mm x 300mm x 1.6mm Cu Plate Heatsink. RATING AND CHARACTERISTIC CURVES (GBJ2001 THRU GBJ2007) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT,(A) 25 AVERAGE FORWARD CURRENT,(A) 250 240 200 FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 20 15 Single Phase 10 Half Wave 60Hz Resistive Or Inductive Load 5 150 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 100 50 0 20 40 60 80 100 120 140 160 0 CASE TEMPERATURE,( C) 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS 50 INSTANTANEOUS FORWARD CURRENT,(A) FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle REVERSE LEAKAGE CURRENT, (mA) 10 10 3.0 1.0 Tj=100 C 0.1 0.1 Tj=25 C .01 0 .2 .4 .6 .8 1.0 1.2 1.4 .01 0 20 40 60 80 100 120 140 FORWARD VOLT AGE,(V) PERCENT OF RATED PEAK REVERSE VOLT AGE, (%)