S2D

S2A THRU S2M 2.0 AMP SURFACE MOUNT SILICON RECTIFIERS VOLTAGE RANGE 50 to 1000 Volts CURRENT FEATURES * Ideal for surface mount applications * Easy pick and place * Built-in strain relief * Low forward voltage drop .083(2.11) .075(1.91) 2.0 Ampere DO-214AA(SMB) .155(3.94) .130(3.30) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.093 grams .096(2.44) .083(2.13) .050(1.27) .030(0.76) .185(4.70) .160(4.06) .012(0.31) .006(0.15) .008 MAX. (.203) .220(5.59) .200(5.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At TL=110 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=125 C Typical Junction Capacitance (Note1) Typical Thermal Resistance RqJL (Note 2) Operating and Storage Temperature Range TJ, TSTG NOTES: S2A 50 35 50 S2B 100 70 100 S2D 200 140 200 S2G 400 280 400 2.0 60 1.10 5.0 200 30 16 -65 +150 S2J 600 420 600 S2K 800 560 800 S2M 1000 700 1000 UNITS V V V A A V mA mA pF C/W C 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance Junction to Lead. RATING AND CHARACTERISTIC CURVES (S2A THRU S2M) FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) 3.0 2.5 2.0 1.5 1.0 0.5 0 0 Tj=25 C Pulse Width 300us 1% Duty Cycle Single Phase Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 50 INSTANTANEOUS FORWARD CURRENT,(A) 10 3.0 1.0 20 40 60 80 100 120 140 160 180 200 LEAD TEMPERATURE,( C) 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 100 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 FORWARD VOLT AGE,(V) 80 60 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 40 20 FIG.3 - TYPICAL REVERSE CHARACTERISTICS 100 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 10 REVERSE LEAKAGE CURRENT, (mA) 70 Tj=100 C FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 60 50 40 30 20 10 0 1.0 .1 Tj=25 C .01 0 .01 .05 .1 .5 1 5 10 50 100 20 40 60 80 100 120 140 REVERSE VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLT AGE,(%)