MBR0530G-CA2-R

UNISONIC TECHNOLOGIES CO., LTD MBR0530 DIODE SCHOTTKY RECTIFIER 1  2 FEATURES SOD-123 * For surface mounted applications * Low forward voltage drop (VF=0.37V Typ. at 0.1A) * Guard ring for transient and ESD protection 1 2 SOD-323  ORDERING INFORMATION Order Number MBR0530G-CA2-R MBR0530G-CB2-R Note: Pin Assignment: A: Anode K: Cathode  Package SOD-123 SOD-323 Pin Assignment 1 2 A K A K Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-014.C MBR0530  DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Maximum Repetitive Peak Reverse Voltage VRRM 30 V Maximum DC Blocking Voltage VR 30 V Working Peak Reverse Voltage VRWM 30 V Maximum RMS Reverse Voltage VR(RMS) 21 V Maximum Voltage Rate of Change (Rated VR) dv/dt 1000 V/μs Average Rectified Forward Current IOUT 500 mA Non-Repetitive Peak Forward Surge Current IFSM 5.5 A Power Dissipation PD 410 mW Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.  THERMAL DATA PARAMETER Junction to Ambient  SYMBOL θJA RATINGS 244 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER Reverse Breakdown Voltage Forward Voltage Drop Reverse Leakage Current Total Capacitance Typical Reverse Recovery Time SYMBOL BVR VF1 VF2 IR1 IR2 CT tRR TEST CONDITIONS IR=130μA IF=0.1A IF=0.5A VR=15V VR=30V VR=1V, f=1MHz IF=IR=10mA, RL=100Ω recover to 0.1 x IR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 30 TYP MAX 0.375 0.430 20 130 170 4 UNIT V V μA pF ns 2 of 3 QW-R601-014.C MBR0530 Instantaneous Forward Current, IF (A) TYPICAL CHARACTERISTICS Total Capacitance, CT (pF)  DIODE Average Rectified Forward Current, IOUT (A) Forward Current Derating Curve 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 Lead Temperature, TL (℃) 150 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-014.C