U74AHC02

UNISONIC TECHNOLOGIES CO., LTD U74AHC02 2-INPUT NOR GATE DESCRIPTION The UTC U74AHC02 are independent 2-input NOR gates which provides the function Y = A + B . CMOS IC FEATURES * Operation Voltage Range: 2.0~5.5V * Low Power Dissipation * High Noise Immunity * Balanced Propagation Delays * Halogen Free TSSOP-14 ORDERING INFORMATION Ordering Number U74AHC02G-P14-R Package TSSOP-14 Packing Tape Reel www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-344.A U74AHC02 PIN CONFIGURATION CMOS IC 1Y 1 1A 2 1B 3 2Y 4 2A 5 2B 6 GND 7 FUNCTION TABLE INPUT A L L H H B L H L H 14 VCC 13 4Y 12 4B 11 4A 10 3Y 9 3B 8 3A OUTPUT Y H L L L LOGIC DIAGRAM (positive logic) IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-344.A U74AHC02 ABSOLUTE MAXIMUM RATINGS (unless otherwise specified) CMOS IC PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~+7 V Input Voltage VIN -0.5~+7 V Output Voltage VOUT -0.5~VCC+0.5 V Input Clamp Current IIK -20 mA Output Clamp Current IOK ±20 mA Continuous Output Current IOUT ±25 mA VCC or GND Current ICC ±50 mA Storage Temperature TSTG -65 ~ + 150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage High Input Voltage Low SYMBOL TEST CONDITIONS VCC VIN VOUT High or low state VCC=2V VIH VCC=3V VCC=5.5V VCC=2V VIL VCC=3V VCC=5.5V VCC=2V VCC=3.3V±0.3V IOH VCC=5V±0.5V VCC=2V VCC=3.3V±0.3V IOL VCC=5V±0.5V Input Rise or Fall Times Operating Temperature Δt ΔV High Output Current Low MIN TYP MAX UNIT 2 5.5 V 0 5.5 V 0 VCC V 1.5 V 2.1 V 3.85 V 0.5 V 0.9 V 1.65 V -50 μA -4 mA -8 mA 50 μA 4 mA 8 100 20 -40 85 mA ns/V ns/V °C VCC=3.3V±0.3V VCC=5V±0.5V TA ELECTRICAL CHARACTERISTICS (Ta=25°C , unless otherwise specified) TEST CONDITIONS MIN TYP VCC=2.0V, IOH=-50μA 1.9 2.0 VCC=3.0V, IOH=-50μA 2.9 3.0 High VOH VCC=4.5V, IOH=-50μA 4.4 4.5 VCC=3.0V, IOH=-4mA 2.58 3.94 VCC=4.5V, IOH=-8mA Output Voltage VCC=2.0V, IOL=50μA VCC=3.0V, IOL=50μA Low VOL VCC=4.5V, IOL=50μA VCC=3.0V, IOL=4mA VCC=4.5V, IOL=8mA Input Leakage Current II(LEAK) VCC=0~5.5V, VIN=5.5V or GND Quiescent Supply Current IQ VCC=5.5V, VIN=VCC or GND, IOUT=0 Input Capacitance CIN VCC=5.0V, VIN=VCC or GND 4 Note: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. PARAMETER SYMBOL MAX UNIT V V V V V 0.1 V 0.1 V 0.1 V 0.36 V 0.36 V ±0.1 μA 2 μA 10 pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-344.A U74AHC02 SWITCHING CHARACTERISTICS (see TEST CIRCUIT AND WAVEFORMS) PARAMETER Propagation delay from input (A or B) to output(Y) SYMBOL tPLH/tPHL tPLH/tPHL TEST CONDITIONS VCC=3.3V±0.3V, CL=15pF VCC=3.3V±0.3V, CL=50pF VCC=5.0V±0.5V, CL=15pF VCC=5.0V±0.5V, CL=50pF MIN TYP 5.6 8.1 3.6 5.1 CMOS IC MAX UNIT 7.9 ns 11.4 ns 5.5 ns 7.5 ns OPERATING CHARACTERISTICS (VCC=5V, Ta=25°С) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS Cpd No load, f=1MHz MIN TYP 15 MAX UNIT pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-344.A U74AHC02 TEST CIRCUIT AND WAVEFORMS CMOS IC Note: CL includes probe and jig capacitance. PRR ≤1MHz, ZO = 50Ω, tR ≤3ns, tF ≤3ns. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-344.A