CCF072M00JKE36

CCF07 Vishay Dale Metal Film Resistors, Industrial, ± 2 % and ± 5 % Tolerance FEATURES • 0.25 watt at + 70 °C power rating Dual rated for 0.5 watt • ± 2 % and ± 5 % tolerance • ± 100 ppm/°C and ± 200 ppm/°C temperature coefficient • Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) • Flame retardant epoxy conformal coating • Standard 4 band color code marking for ease of identification after mounting • Lead-(Pb)-free version is RoHS compliant Pb-free Available e3 RoHS* COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MODEL MODEL POWER RATING P70 ˚C W 0.25 / 0.5 0.25 / 0.5 LIMITING ELEMENT VOLTAGE MAX. V 250 250 TEMPERATURE COEFFICIENT ppm/°C ± 100 ± 200 TOLERANCE % ± 2, ± 5 ±5 RESISTANCE RANGE E-SERIES Ω 10R - 1M 1.1M - 2M 24 24 CCF07 CCF07 CCF-07 CCF-07 TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70 °C Maximum Working Voltage Insulation Voltage (1 min) Dielectric Strength Insulation Resistance Operating Temperature Range Terminal Strength (pull test) Weight UNIT W V Veff VAC Ω °C lb g CCF07 0.25 / 0.5 ≤ 250 500 450 ≥ 1011 - 65 / + 150 2 0.35 max GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF07240RGKR36 (preferred part numbering format) C GLOBAL MODEL CCF07 C F 0 7 2 4 0 R G K R 3 6 PACKAGING SPECIAL RESISTANCE VALUE R = Decimal K = Thousand M = Million 10R0 = 10 Ω 680K = 680K Ω 2M00 = 2.0M Ω TOLERANCE CODE G=±2% J=±5% TEMPERATURE COEFFICIENT K = 100 ppm N = 200 ppm E36 = Lead free, T/R (5000 pcs) Blank = Standard R36 = Tin/Lead, T/R (5000 pcs) (Dash Number) (up to 3 digits) from 1 - 999 as applicable Historical Part Number example: CCF-07241G (will continue to be accepted) CCF-07 HISTORICAL MODEL 241 RESISTANCE VALUE G TOLERANCE CODE R36 PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 12 For Technical Questions, contact ff3dresistors@vishay.com Document Number: 31013 Revision 08-Dec-05 CCF07 Metal Film Resistors, Industrial RATED POWER IN % Vishay Dale DIMENSIONS in inches [millimeters] 120 100 80 60 40 1.100 ± 0.040 [27.94 ± 1.02] 0.245 ± 0.020 [6.22 ± 0.51] Refer to note for Wire Dia. 0.090 ± 0.008 [2.29 ± 0.20] 20 0 - 65 - 50 - 25 0 25 50 70 75 100 125 150 175 200 AMBIENT TEMPERATURE IN ˚C *Note: Wire Dia. CCF07 (Sn/Pb) = 0.025 ± 0.002 [0.64 ± 0.05] CCF07 (Sn) = 0.023 ± 0.002 [0.60 ± 0.05] DERATING MARKING - Color band RESISTANCE VALUES Vishay Dale Model CCF07 is available in the standard 24 resistance values per decade. Values are obtained from the following decade table by multiplying by powers of 10. As an example: 24 can represent 24 ohm, 240 ohm, 2.4 kohm, 24 kohm or 240 kohm. 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 PERFORMANCE TEST* Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock / Bump Vibration Terminal Strength Dielectric Withstanding Voltage Life * Test Methods per MIL-STD-202G/IEC 60115/DIN EN 140000 (as applicable). ** Life ∆R is ± 2.0 % for 1/2 watt rating. MAX. ∆R (Typical Test Lots) ± 1.0 % ± 0.5 % ± 0.5 % ± 1.5 % ± 0.5 % ± 0.5 % ± 0.5 % ± 0.5 % ± 0.5 % ± 1.5 %** Document Number: 31013 Revision 08-Dec-05 For Technical Questions, contact ff3dresistors@vishay.com www.vishay.com 13 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1