CO-767PSB18213

Product Data Sheet CO-760PS Series Surface Mount Oven Controlled Crystal Oscillators Features • Frequencies Available from 4.8 MHz to 61.44 MHz. • Stability as high as ±2 x 10 -8 over -20°C to +70°C • Aging: 5 x 10 -9 / day to 5 x 10 -10 / day • Package: 0.8” x 0.8” x 0.6” (20.5 x 20.5 x 15.2 mm) • Low Profile, Surface Mount Design • Supply Voltage: +5 volts or +3.3 volts Applications • Telecommunication Systems • Wireless Communication Equipment • Data Communications • Instrumentation Description Vectron International has introduced a series of low profile, surface mount, oven controlled crystal oscillators (OCXOs) available in frequencies from 4.8 MHz to 61.44 MHz. The model CO-760PS provides exceptionally low aging rates and high temperature stabilities and is packaged as a surface mount device (SMD), measuring 0.8” x 0.8” x 0.6” (20.5mm x 20.5 mm x 15.2 mm). The oscillators are available with SC or AT cut crystals and provide an aging rate as low as 5 x 10-10/day with temperature stabilities from ± 2 x 10-8 over -20°C to +70°C and operate from a +5V supply steady power of 1watt. The phase noise floor at 50 kHz is - 140 dBc/Hz for AT cut crystals and - 145 dBc/Hz for SC types, depending on the output frequency. The product finds application in telecommunications, data communications, frequency synthesizers, timing, navigation, telemetry and instrumentation systems. CO-760PS Series Surface Mount Oven Controlled Crystal Oscillators Performance Characteristics Parameter Characteristic CO-764/766/767PS Series (AT cut crystal) Frequency: CO-767/768PS Series (SC cut crystal) 4.8 MHz to 61.44 MHz with 5, 10, 13, 16.384, 20, 20.48, 26, 38.88, 52 and 61.44 MHz standard Temperature stability: Temperature Range B: 0°C to +50°C Temperature Range D: -20°C to +70°C Temperature Range J: -10°C to +75°C Aging: B38: ±3 x 10 -8 D58: ±5 x 10 -8 J17: ±1 x 10 -7 CO-764PS: 5 x 10 -9/day (5 x 10 -7/year) CO-766PS 3 x 10 -9/day (3 x 10 -7/year) CO-767PS 1 x 10 -9/day (1 x 10 -7/year) to within 1 x 10-7 of final frequency in 5 minutes @ 25°C 5 x 10-9 per percent 1 x 10-10 /second B18: ±1 x 10 -8 D28: ±2 x 10 -8 J58: ±5 x 10 -8 CO-767PS: 1 x 10 -9/day (1 x 10 -7/year) CO-768PS: 5 x 10 -10/day (5 x 10 -8/year) optional for some frequencies to within 1 x 10-8 of final frequency in 5 minutes @ 25°C 2 x 10-9 per percent 5 x 10-11 /second Warm-up: (after 24 hours off) Frequency vs. Supply (±5%): Short Term (Allan Variance): Output level: HCMOS/TTL Standard, >0.5 Vrms/50Ω (+7 dBm) optional (LVCMOS output with +3.3 volt power supply) -25 dBc +5 Vdc ±5%; 2.5W peak @ -20°C; 1.0W stabilized at 25°C (+3.3 VdC ±5%, optional) ±5 x 10-6 typical for 0 to 4V control -100 dBc/Hz @ 10 Hz offset -140 dBc/Hz @ 50 kHz offset ±2 x 10-6 typical for 0 to 4V control -110 dBc/Hz @ 10 Hz offset -145 dBc/Hz @ 50 kHz offset Harmonics (sinewave): Power supply: Frequency adjustment: Phase Noise: (typical) Size: Base: Reflow: 0.8” x 0.8” x 0.6” max. (20.5 x 20.5 x 15.2mm) FR4 material with Gull wing leads 240 (+5, -0)°C for 10 to 40 seconds Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON 2 CO-760PS Series Surface Mount Oven Controlled Crystal Oscillators Outline Drawing Pin Configuration 1. RF-output 2. Ground, case 3. Control voltage VC 4. Reference voltage output VREF 5. N.C. 6. Ground, case 7. Supply voltage VS in (mm) Recommended Soldering Profile Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON 3 CO-760PS Series Surface Mount Oven Controlled Crystal Oscillators Tape and Reel Note: Dimensions in mm How To Order CO-76 4 = 5x10 /day 6 = 3x10-9/day 7= 1x10-9/day 8= 5x10-10/day -9 PS Frequency Temperature Stability (see page 2) (eg. B58= ±5x10-8 over 0°C to +50°C) Aging (5x10-7/yr) (3x10-7/yr) (1x10-7/yr) (5x10-8/yr) optional for some frequencies Output Option 1: HCMOS/LSTTL 2: Sinewave 3: LVCMOS with +3.3 volt supply www.vectron.com For additional information please contact: USA: Vectron International • 267 Lowell Road Hudson, NH 03051 . . . . . . Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tel: 49 (0) 3328 4784 17 * Fax: 49 (0) 3328 4784 30 ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tel: +86 21 28909740 / 41 / 42 Fax: +86 21 28909240 / 28909999 Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Printed in the USA 12/99, 8/02 4