VI-B63-EU-BM

12 1-800-735-6200 BatMod™ Battery Charger Current Source Modules Features s Programmable Output Current s Booster Versions Available s Size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7) s UL, CSA, TÜV s Compatible with All Major Battery Types s Inputs: 48, 150, 300Vdc s Outputs: 12, 24, 48Vdc Nom. s Analog Current Monitor s Analog Overvoltage Adjust s CE Marked BatMod Specifications (typical TBP = 25°C, nominal line, 75% load, unless otherwise specified) Parameter Nominal Input Voltage Output Current (Refer to Safe Operating Curves below) Current Control Input Current Monitor Output Voltage Control Input Output Voltage Setpoint Trimmable +10%, -25% Dynamic Characteristics 48Vdc, 150Vdc, 300Vdc 0-14.5A 0-7.25A 0-3.6A 1V to 5V 1V to 5V 0V to 2.5V 15V, 30V, 60V +/-1% V Mode: 300 µsec typ. I Mode: 250 µsec typ. Remarks 42-60V, 100-200V, 200-400V 12V battery system 24V battery system 48V battery system Zero to max. current Zero to full load Zero to FS output 12V, 24V, 48V Output Respectively VNOM for 50-100% load changes E-Grade C-Grade I-Grade M-Grade Product Highlights The BatMod combines Vicor’s industry standard package with the flexibility of a power converter whose output voltage and output current may be independently set. BatMod’s allow the user to independently program a constant output current and a maximum float voltage. The float voltage is the point at which the BatMod transitions from constant current to constant voltage. These features make the BatMod an ideal candidate for battery charging and other applications which require a controlled current source. The BatMod is also available in booster versions that enable the designer to create systems capable of multiple kilowatts of output power. With its wide range of input options, the BatMod is compatible with all major battery types. This new current output module finds application in systems where easily programmable current is of primary importance. Consult factory for availability of input/output voltage ranges not shown. Operating Temp./Storage Temp. -10°C to +85°C, -20°C to +100°C -25°C to +85°C, -40°C to +100°C -40°C to +85°C, -55°C to +100°C -55°C to +85°C, -65°C to +100°C Dielectric Withstand Input to Output 3,000VRMS Output to Baseplate 500VRMS Input to Baseplate 1,500VRMS Safe Operating Conditions 18 16.5V Power Current High Program Exceeded Exceeded Exceeded 36 32 28 24 20 16 12 8 4 16 14 12 Safe Operating Area Maximum 33.0V Voltage Setpoint Power Current High Program Exceeded Exceeded Exceeded 72 64 56 48 40 32 24 16 8 Maximum 66.0V Voltage Setpoint High Program Exceeded Current Power Exceeded Exceeded Maximum Voltage Setpoint 13.8V Volts Minimum 22.5V Voltage Setpoint Safe Operating Area 27.6V Volts Minimum 45.0V Voltage Setpoint Safe Operating Area 55.2V Minimum Voltage Setpoint Minimum Operating Voltage 11.25V Volts 10 8 6 4 2 2 4 6 6.9V* Minimum 13.8V* Operating Voltage Minimum 27.6V* Operating Voltage 8 10 12 14 16 Amps 14.5A 1 2 3 45 Amps 6 7 8 7.25A 0.5 1 1.5 2 2.5 3 3.5 4 Amps 3.6A 48V Battery System 12V Battery System *Maximum recommended battery discharge. 24V Battery System Part Numbering Typical Model: Input: 300Vdc Output: 12Vdc at 200W Module 2 = Driver B = Booster VI- 2 6 1 - E U - B M Input Voltage Nominal Range 3 = 48V 42 - 60V 5 = 150V 100 - 200V 6 = 300V 200 - 400V Output Voltage Nominal Range 1 = 12V (11.25-16.5V) 3 = 24V1 (22.5-33.0V) 4 = 48V (45.0-66.0V) E C I M Product Grade = = = = -10°C -25°C -40°C -55°C to +85°C to +85°C to +85°C to +85°C 1. Available in 300V input only. Packaging Options: SlimMod™, high power density, flangeless packages and FinMods™, featuring integral finned heatsinks. SlimMod: Add the suffix -S to the end of the BatMod part number. FinMods: Add the suffix -F1 for .25"H Longitudinal Fin; F2 for .5"H Longitudinal Fin -F3 for .25"H Transverse Fin; F4 for .5"H Transverse Fin 74 12 1-800-735-6200 Typical Applications DC Input Battery Charger +In Gate In DC Input Gate Out –In BatMod +Out V TRIM I TRIM I MON –Out + External Control Functions 12-48V Battery – DC Input Programmable Current Source +In Gate In DC Input Gate Out –In BatMod +Out V TRIM I TRIM I MON –Out + External Control Functions Load – Mechanical Diagram .50 (12,7) .30 (7,6) ±.015 (0,38) 4.60 (116,8) 3.60 (91,4) 1.80 (45,7) .080 (2,0) Dia (2) places Solder plate over copper alloy 4 2.10 (53,3) 3 9 BatMod 2 1 8 7 6 5 1.40 1.00 (35,6) .70 (25,4) .40 (17,8) (10,2) .35 (8,9) ±.015 (0,38) Pin # 1 2 3 4 5 6* 7* 8* 9 Function +In Gate In Gate Out -In +Out VTRIM ITRIM IMON -Out .15 (3,8) FULL R .15 (3,8) Product ID this surface .040 (1,0) Dia (7) places Solder plate over copper alloy * Do not connect on Booster modules 2.40 (61,0) 4.20 (106,7) .22 (5,6) MIN .30 (7,6) Min 1.75 (44,5) .50 (12,7) .12 (3,0) +.030 (0,76) -.000 .01 Aluminum Base 75