100MT160APBF

40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Vishay High Power Products Three Phase Bridge (Power Module), 45 A to 100 A FEATURES • Low VF • Low profile package • Direct mounting to heatsink • Flat pin/round pin versions with PCB solderable terminals • Low junction to case thermal resistance • 3500 VRMS insulation voltage • UL approved file E78996 MT...PA MT...PB • Compliant to RoHS directive 2002/95/EC • Designed and qualified for industrial level APPLICATIONS • Power conversion machines • Welding • UPS • SMPS PRODUCT SUMMARY IO 45 A to 100 A • Motor drives • General purpose and heavy duty application DESCRIPTION A range of extremely compact three-phase rectifier bridges offering efficient and reliable operation. The low profile package has been specifically conceived to maximize space saving and optimize the electrical layout of the application specific power supplies. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO CHARACTERISTICS 40MT 45 TC 50 Hz IFSM 60 Hz 50 Hz 60 Hz I2√t VRRM TStg TJ Range - 40 to 150 100 270 280 365 325 3650 70MT 75 80 380 398 724 660 7240 1400 to 1600 - 40 to 125 °C 100MT 100 80 450 A 470 1013 920 10 130 A2√s V A2s UNITS A °C I2t Document Number: 94538 Revision: 10-Mar-10 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Vishay High Power Products ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE REVERSE VOLTAGE V 140 160 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 1400 1600 VRSM, MAXIMUM NON-REPETITIVE PEAK V 1500 1700 IRRM MAXIMUM AT TJ = 150 °C mA 5 Three Phase Bridge (Power Module), 45 A to 100 A 40MT140P, 70MT140P, 100MT140P 40MT160P, 70MT160P, 100MT160P FORWARD CONDUCTION PARAMETER Maximum DC output current at case temperature Maximum peak, one cycle forward, non-repetitive on state surge current SYMBOL IO TEST CONDITIONS 120° rect. to conduction angle t = 10 ms IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing Value of threshold voltage Slope resistance Maximum forward voltage drop I2√t VF(TO) rt VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied 40MT 45 100 270 280 225 Initial TJ = TJ maximum 240 365 325 253 240 3650 0.78 14.8 1.45 70MT 75 80 380 398 320 335 724 660 512 467 7240 0.82 9.5 1.45 100MT 100 80 450 470 380 400 1013 920 600 665 10 130 0.75 8.1 1.51 A2√s V mΩ V A2s Α UNITS A °C t = 0.1 ms to 10 ms, no voltage reapplied TJ maximum TJ = 25 °C; tp = 400 μs single junction (40MT, Ipk = 40 A) (70MT, Ipk = 70 A) (100MT, Ipk = 100 A) INSULATION TABLE PARAMETER RMS insulation voltage SYMBOL VINS TEST CONDITIONS TJ = 25 °C, all terminal shorted, f = 50 Hz, t = 1 s 40MT 70MT 3500 100MT UNITS V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range Maximum storage temperature range SYMBOL TJ TStg DC operation per module Maximum thermal resistance, junction to case RthJC DC operation per junction 120° rect. condunction angle per module 120° rect. condunction angle per junction Maximum thermal resistance, case to heatsink per module Mounting torque to heatsink ± 10 % Approximate weight RthCS Mounting surface smooth, flat and greased Heatsink compound thermal conductivity = 0.42 W/mK A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads 0.27 1.6 0.38 2.25 TEST CONDITIONS 40MT 70MT 100MT UNITS - 40 to 150 °C - 40 to 125 0.23 1.38 0.29 1.76 0.1 4 65 Nm g 0.19 1.14 0.22 1.29 K/W www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 94538 Revision: 10-Mar-10 40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Three Phase Bridge Vishay High Power Products (Power Module), 45 A to 100 A CLEARANCE AND CREEPAGE DISTANCES PARAMETER Clearance Creepage distance TEST CONDITIONS External shortest distances in air between terminals which are not internally short circuited together Shortest distance along external surface of the insulating material between terminals which are not internally short circuited together MT...PA MT...PB UNITS 10.9 12.3 mm Maximum Allowable Case Temperature (°C) 150 140 130 120 110 100 90 80 0 10 40MT...P R thJC (DC) = 0.27 K/W Per Module Peak Half Sine Wave On-state Current (A) 160 250 200 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 150 120˚ (Rect) 100 40MT...P Per Junction 50 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 20 30 40 50 Total Output Current (A) Fig. 1 - Current Rating Characteristics Fig. 3 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave On-state Current (A) 1000 Instantaneous On-state Current (A) 300 250 200 150 100 Tj = 25˚C 100 Tj = 150˚C Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 150˚C No Voltage Reapplied Rated V rrm Reapplied 10 40MT...P 40MT...P Per Junction 1 0 1 2 3 4 5 6 Instantaneous On-state Voltage (V) 50 0.01 0.1 Pulse Train Duration(s) 1 Fig. 2 - On-State Voltage Drop Chracteristics Fig. 4 - Maximum Non-Repetitive Surge Current Document Number: 94538 Revision: 10-Mar-10 For technical questions, contact: indmodules@vishay.com www.vishay.com 3 40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Vishay High Power Products Three Phase Bridge (Power Module), 45 A to 100 A 250 Maximum Total Power Loss (W) 40MT...P 1 0. = A hS Rt W K/ 2 0. 200 150 100 50 0 0 Tj = 150˚C 120˚ (Rect) 0. 3 K 0.5 /W K/ W 0.4 K/ W 1K /W 10 20 30 40 Total Output Current (A) 50 0 30 60 90 120 150 60 Maximum Allowable Ambient Temperature (°C) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) W K/ a elt -D R Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (°C) 160 150 140 130 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 80 Total Output Current (A) 350 300 250 200 150 100 1 70MT...P R thJC (DC) = 0.23 K/W Per Module At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 120˚ (Rect) 70MT...P Per Junction 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 6 - Current Rating Characteristics Fig. 8 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave On-state Current (A) 1000 Instantaneous On-state Current (A) 400 350 300 250 200 150 100 Tj = 25˚C Tj = 150˚C 100 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 150˚C No Voltage Reapplied Rated V rrm Reapplied 10 70MT...P 70MT...P Per Junction 1 0 1 2 3 4 5 Instantaneous On-state Voltage (V) 50 0.01 0.1 Pulse Train Duration(s) 1 Fig. 7 - On-State Voltage Drop Characteristics Fig. 9 - Maximum Non-Repetitive Surge Current www.vishay.com 4 For technical questions, contact: indmodules@vishay.com Document Number: 94538 Revision: 10-Mar-10 40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Three Phase Bridge Vishay High Power Products (Power Module), 45 A to 100 A 300 Maximum Total Power Loss (W) 70MT...P 250 200 150 100 50 0 0 Tj = 150˚C 120˚ (Rect) 0. 2 K/ W 0.3 K/ W 0.4 K/W 0.5 K/W 1K /W A hS Rt = 1 0. W K/ a elt -D R 20 40 60 0 80 30 60 90 120 150 Total Output Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 10 - Current Rating Nomogram (1 Module Per Heatsink) 100MT...P R thJC (DC) = 0.19 K/W Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (°C) 140 120 100 80 60 40 40 50 60 70 80 90 100 110 120 130 Total Output Current (A) 400 350 300 250 200 150 100 1 Per Module At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 120˚ (Rect) 100MT...P Per Junction 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 11 - Current Rating Characteristics Fig. 13 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave On-state Current (A) 1000 Instantaneous On-state Current (A) 500 450 100MT...P 100 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 400 Initial T j = 125˚C No Voltage Reapplied 350 Rated V rrm Reapplied 300 250 200 150 100 50 100MT...P Per Junction 10 Tj = 150˚C Tj = 25˚C 1 0.5 1 1.5 2 2.5 3 3.5 4 0 0.01 0.1 1 10 Instantaneous On-state Voltage (V) Pulse Train Duration(s) Fig. 12 - On-State Voltage Drop Characteristics Fig. 14 - Maximum Non-Repetitive Surge Current Document Number: 94538 Revision: 10-Mar-10 For technical questions, contact: indmodules@vishay.com www.vishay.com 5 40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Vishay High Power Products Three Phase Bridge (Power Module), 45 A to 100 A 500 Maximum Total Power Loss (W) 100MT...P 400 300 200 100 0 0 Tj = 150˚C Rt hS 0.0 A = 5K 0 .0 0.1 /W 25 K/ K/ W W 0.2 K/W 0.3 K/W 0.5 K/W 1 K/W -D elt a R 120˚ (Rect) 20 40 60 80 Total Output Current (A) 0 30 60 90 120 150 100 Maximum Allowable Ambient Temperature (°C) Fig. 15 - Current Rating Nomogram (1 Module Per Heatsink) Transient Thermal Impedance Z thJC (K/W) 10 Steady State Value RthJC per junction = 1.6 K/W (40MT...P) 1.38 K/W (70MT...P 1.14 K/W (100MT...P) DC Operation) 1 40MT...P 70MT...P 100MT...P 0.1 0.01 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 16 - Thermal Impedance ZthJC Characteristics www.vishay.com 6 For technical questions, contact: indmodules@vishay.com Document Number: 94538 Revision: 10-Mar-10 40MT1.0P.PbF, 70MT1.0P.PbF, 100MT1.0P.PbF Series Three Phase Bridge Vishay High Power Products (Power Module), 45 A to 100 A ORDERING INFORMATION TABLE Device code 10 1 0 2 MT 3 160 4 P B 5 PbF 6 1 - Current rating code 4 = 45 A 7 = 75 A 10 = 100 A 2 3 4 5 6 - Circuit configuration code: 0 = 3-Phase rectifier bridge Essential part number Voltage code x 10 = VRRM (see Voltage Ratings table) Pinout code Lead (Pb)-free A = Flat pins B = Round pins CIRCUIT CONFIGURATION LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95244 Document Number: 94538 Revision: 10-Mar-10 For technical questions, contact: indmodules@vishay.com www.vishay.com 7 Outline Dimensions Vishay Semiconductors MTP Flat and Round Pin DIMENSIONS FOR MTP WITH FLAT PIN in millimeters 7 14 2 Electrical circuit 3, 4 4 42 ± 0.1 2.5 12 5 6 7 1, 2 44.5 7 7 Ø 5.2 (x 2) 0.5 4 3 2 1 27.5 22 32.5 ± 0.5 5.5 0.5 5.5 7 7 7.4 22 5 6 7 14 14 Ø5 16 10.5 12 ± 0.5 39.5 1.3 48.7 63.5 ± 0.25 Document Number: 95244 Revision: 07-Nov-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Outline Dimensions Vishay Semiconductors MTP Flat and Round Pin DIMENSIONS FOR MTP WITH ROUND PIN in millimeters Ø5 7 14 7 4 Electrical circuit 3, 4 2.5 12 20.5 ± 0.1 5 6 7 1, 2 44.5 7 7 7 7 Ø 1.1 Ø5 32.5 ± 0.1 4 3 2 1 27.5 22 4 10.5 12 ± 0.5 Ø 5.2 (x 2) 5 6 7 16 14 14 7.4 31.8 1.3 39.5 48.7 63.5 ± 0.25 www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 95244 Revision: 07-Nov-07 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1