135D686X0125K2

135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation FEATURES • Terminations: standard tin/lead (SnPb), 100 % Tin (RoHS compliant) available • Standard and extended ratings Pb-free Available • Model 135D tantalum-case electrolytic COMPLIANT capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These units have a 3 volt reverse voltage capability at + 85 °C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. RoHS* • Designed for the aerospace applications, this capacitor was developed under partial sponsorship of the Marshall Space Flight Center, National Aeronautics and Space Administration. The capacitors have a high resistance to damage from shock and vibration. Extended range ratings and high temperature designs areavailable. • Model 135D capacitors are commercial equivalents of Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style; TLT, TXT, THT, THX and Military Style CLR79 and CLR81, designed to meet the performance requirements of Military Specification MIL-PRF-39006/22/25. Capacitors to meet MILPRF- 39006/22/25 should be ordered by part numbers shown in that specification. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C. (To + 200 °C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 % standard. ± 10 %, ± 5 % available as special. DC Leakage Current (DCL Max.): At + 25 °C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. Life Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of + 85 °C or + 125 °C at the applicable rated DC working voltage. Following life test: 1. DCL, measured at + 85 °C rated voltage, shall not be in excess of the original requirement. 2. The equivalent series resistance shall not exceed 150 % of the initial requirement. 3. Change in capacitance shall not exceed 10 % from the initial measurement. ORDERING INFORMATION 135D MODEL 306 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow X0 CAPACITANCE TOLERANCE X0 = ± 20 % X9 = ± 10 % X5 = ± 5 % 006 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) C CASE CODE See Ratings and Case Codes Table 2 STYLE NUMBER Standard 0 = No outer tube. 2 = Outer polyesterfilm insulation. High Temperature 8 = No outer tube. 6 = High temperature film insulation (above + 125 °C) E3 RoHS COMPLIANT E3 = 100 % tin termination (RoHS compliant design) Blank = SnPb termination (standard design) Note Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to the unit weight. * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 42 For technical questions, contact: tantalum@vishay.com Document Number: 40024 Revision: 10-Oct-08 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation DIMENSIONS in inches [millimeters] E L1 E D Vishay 0.0253 ± 0.002 [0.64 ± 0.05] DIA. (NO. 22 AWG TINNED NICKEL LEADS) SOLDERABLE AND WELDABLE L2 WELD TANTALUM CASE CODE TYPE DCLR 79/81 135D EQUIV. C F T K T1 T2 T3 T4 D 0.188 ± 0.016 [4.78 ± 0.41] 0.281 ± 0.016 [7.14 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] L1 0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41] 0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41] 0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41] 1.062 + 0.031 - 0.016 [26.97 + 0.79 - 0.41] L2 (Max.) 0.734 [18.64] 0.922 [23.42] 1.047 [26.59] 1.343 [34.11] E 1.500 ± 0.250 [38.10 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] WEIGHT (g) (Max.) 2.6 6.2 11.6 17.7 Note *For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body. STANDARD RATINGS CAPACITANCE CASE (µF) CODE MAX. DCL (µA) MAX. CAPACITANCE CHANGE at (%) at + 85 °C + 25 °C - 55 °C + 85 °C + 125 °C + 125 °C 6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C. . . 3.6 WVDC at + 200 °C 135D306X0006C2 4.0 100 1.0 2.0 - 40 + 10.5 + 12 135D686X0006C2 3.2 60 1.0 2.0 - 40 + 14 + 16 135D147X0006F2 2.0 40 1.0 3.0 - 40 + 14 + 16 135D277X0006F2 2.2 25 1.0 6.5 - 44 + 17.5 + 20 135D337X0006T2 1.4 20 2.0 7.9 - 44 + 14 + 16 135D567X0006T2 1.3 25 2.0 13.0 - 64 + 17.5 + 20 135D128X0006K2 1.0 20 3.0 14.0 - 80 + 25 + 25 8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . 4.8 WVDC at + 200 °C 135D256X0008C2 4.0 100 1.0 2.0 - 40 + 10.5 + 12 135D566X0008C2 3.3 59 1.0 2.0 - 40 + 14 + 16 135D127X0008F2 2.6 50 1.0 2.0 - 44 + 17.5 + 20 135D227X0008F2 2.4 30 1.0 7.0 - 44 + 17.5 + 20 135D297X0008T2 1.8 25 2.0 6.0 - 64 + 17.5 + 20 135D437X0008T2 1.4 25 2.0 14.0 - 64 + 17.5 + 20 135D857X0008K2 1.0 22 4.0 16.0 - 80 + 25 + 25 10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C 135D206X0010C2 4.0 120 1.0 2.0 - 32 + 10.5 + 12 135D476X0010C2 3.7 90 1.0 2.0 - 36 + 14 + 16 135D107X0010F2 2.4 60 1.0 4.0 - 36 + 14 + 16 135D187X0010F2 2.2 40 1.0 7.0 - 36 + 14 + 16 135D257X0010T2 1.8 30 2.0 10.0 - 40 + 14 + 16 135D397X0010T2 1.5 25 2.0 16.0 - 64 + 17.5 + 20 135D757X0010K2 1.0 23 4.0 16.0 - 80 + 25 + 25 15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C 135D156X0015C2 4.4 155 1.0 2.0 - 24 + 10.5 + 12 135D336X0015C2 4.0 90 1.0 2.0 - 28 + 14 + 16 135D706X0015F2 2.8 75 1.0 4.0 - 28 + 14 + 16 135D127X0015F2 2.6 50 1.0 7.0 - 28 + 17.5 + 20 135D177X0015T2 2.4 35 2.0 10.0 - 32 + 14 + 16 135D277X0015T2 2.2 30 2.0 16.0 - 56 + 17.5 + 20 135D547X0015K2 1.0 23 6.0 24.0 - 80 + 25 + 25 PART NUMBER* MAX. ESR MAX. IMP. at at + 25 °C - 55 °C 120 Hz 120 Hz MAX. RIPPLE 40 kHz Irms 820 960 1200 1375 1800 1900 2265 820 900 1230 1370 1770 1825 2330 820 855 1200 1365 1720 1800 2360 780 820 1150 1450 1480 1740 2330 30 68 140 270 330 560 1200 25 56 120 220 290 430 850 20 47 100 180 250 390 750 15 33 70 120 170 270 540 C C F F T T K C C F F T T K C C F F T T K C C F F T T K Note * Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”. Document Number: 40024 Revision: 10-Oct-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 43 135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation STANDARD RATINGS CAPACITANCE CASE (µF) CODE MAX. DCL (µA) MAX. CAPACITANCE CHANGE at (%) at + 85 °C + 25 °C - 55 °C + 85 °C + 125 °C + 125 °C 25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C 135D106X0025C2 5.3 220 1.0 2.0 - 16 +8 +9 135D226X0025C2 4.2 140 1.0 2.0 - 20 + 10.5 + 12 135D506X0025F2 3.0 70 1.0 2.0 - 28 + 13 + 15 135D107X0025F2 2.8 50 1.0 10.0 - 28 + 13 + 15 135D127X0025T2 2.6 38 2.0 6.0 - 32 + 13 + 15 135D187X0025T2 2.2 32 2.0 18.0 - 48 + 13 + 15 135D357X0025K2 1.3 24 7.0 28.0 - 70 + 25 + 25 30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C . . . 18 WVDC at + 200 °C 135D805X0030C2 6.6 275 1.0 2.0 - 16 +8 + 12 135D156X0030C2 6.2 175 1.0 2.0 - 20 + 10.5 + 12 135D406X0030F2 4.0 65 1.0 5.0 - 24 + 10.5 + 12 135D686X0030F2 2.9 60 1.0 8.0 - 24 + 13 + 15 135D107X0030T2 2.7 40 2.0 12.0 - 28 + 10.5 + 12 135D157X0030T2 2.3 35 2.0 18.0 - 48 + 13 + 15 135D307X0030K2 1.4 25 8.0 32.0 - 60 + 25 + 25 35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C 135D156X0035C2 6.2 175 0.75 1.5 - 20 + 10.5 + 12 135D686X0035F2 2.9 60 1.0 2.0 - 24 + 13 + 15 135D277X0035K2 1.4 26 3.0 12.0 - 58 + 25 + 25 50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C 135D505X0050C2 8.0 400 1.0 2.0 - 16 +5 +6 135D106X0050C2 6.4 250 1.0 2.0 - 24 +8 +9 135D256X0050F2 4.6 95 1.0 5.0 - 20 + 10.5 + 12 135D476X0050F2 3.7 70 1.0 9.0 - 28 + 13 + 15 135D606X0050T2 2.9 45 2.0 12.0 - 16 + 10.5 + 12 135D826X0050T2 2.5 45 2.0 16.0 - 32 + 13 + 15 135D167X0050K2 1.5 27 8.0 32.0 - 50 + 25 + 25 60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C . . . 36 WVDC at + 200 °C 135D405X0060C2 9.3 550 1.0 2.0 - 16 +5 +6 135D825X0060C2 6.6 275 1.0 2.0 - 24 +8 +9 135D206X0060F2 4.7 105 1.0 5.0 - 16 +8 +9 135D396X0060F2 3.4 90 1.0 9.0 - 28 + 10.5 + 15 135D506X0060T2 2.9 50 2.0 12.0 - 16 + 10.5 + 12 135D686X0060T2 2.5 50 2.0 16.0 - 32 + 10.5 + 15 135D147X0060K2 1.5 28 8.0 32.0 - 40 + 20 + 20 75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . 45 WVDC at + 200 °C 135D355X0075C2 9.5 650 1.0 2.0 - 16 +5 +6 135D685X0075C2 6.8 300 1.0 2.0 - 20 +8 +9 135D156X0075F2 5.3 150 1.0 5.0 - 16 +8 +9 135D336X0075F2 4.2 90 1.0 10.0 - 24 + 10.5 + 15 135D406X0075T2 3.0 60 2.0 12.0 - 16 + 10.5 + 12 135D566X0075T2 2.6 60 2.0 17.0 - 28 + 10.5 + 15 135D117X0075K2 1.5 29 9.0 36 .0 - 35 + 20 + 20 100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C 135D255X0100C2 10.6 950 1.0 2.0 - 16 +7 +8 135D475X0100C2 8.5 500 1.0 2.0 - 16 +7 +8 135D116X0100F2 6.0 200 1.0 4.0 - 16 +7 +8 135D226X0100F2 4.8 100 1.0 9.0 - 16 +7 +8 135D256X0125T2 3.2 93 2.0 13.0 - 16 +7 +8 135D306X0100T2 3.3 80 2.0 12.0 - 16 +7 +8 135D436X0100T2 2.6 70 2.0 17.0 - 20 +7 +8 135D566X0125K2 1.6 32 10.0 40.0 - 25 + 15 + 15 135D866X0100K2 1.6 30 9.0 36.0 - 25 + 15 + 15 PART NUMBER* MAX. ESR MAX. IMP. at at + 25 °C - 55 °C 120 Hz 120 Hz MAX. RIPPLE 40 kHz rms 715 800 1130 1435 1450 1525 1970 640 780 1120 1285 1450 1525 1950 660 1195 1950 580 715 1005 1155 1335 1400 1900 525 625 930 1110 1330 1365 1850 525 610 890 1000 1250 1335 1850 505 565 835 965 1200 1240 1335 1800 1800 10 22 50 100 120 180 350 8 15 40 68 100 150 300 15 68 270 5 10 25 47 60 82 160 4 8.2 20 39 50 68 140 3.5 6.8 15 33 40 56 110 2.5 4.7 11 22 25 30 43 56 86 C C F F T T K C C F F T T K C F K C C F F T T K C C F F T T K C C F F T T K C C F F T T T K K Note * Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”. www.vishay.com 44 For technical questions, contact: tantalum@vishay.com Document Number: 40024 Revision: 10-Oct-08 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation STANDARD RATINGS CAPACITANCE CASE (µF) CODE MAX. DCL (µA) MAX. CAPACITANCE CHANGE at (%) at + 85 °C + 25 °C - 55 °C + 85 °C + 125 °C + 125 °C 125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C 135D175X0125C2 15.6 1250 1.0 2.0 - 16 +7 +8 135D365X0125C2 10.0 600 1.0 2.0 - 16 +7 +8 135D905X0125F2 7.4 240 1.0 5.0 - 16 +7 +8 135D146X0125F2 5.7 167 1.0 7.0 - 16 +7 +8 135D186X0125T2 3.7 129 2.0 9.0 - 16 +7 +8 PART NUMBER* MAX. ESR MAX. IMP. at at + 25 °C - 55 °C 120 Hz 120 Hz MAX. RIPPLE 40 kHz rms 415 520 755 860 1130 Vishay 1.7 3.6 9 14 18 C C F F T Note * Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”. EXTENDED RATINGS CAPACITANCE CASE (µF) CODE MAX. ESR MAX. IMP. MAX. DCL (µA) MAX.. CAPACITANCE at at at CHANGE (%) at + 25 °C - 55 °C + 85 °C + 25 °C - 55 °C + 85 °C + 125 °C 120 Hz 120 Hz + 125 °C 6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C . . . 3.6 WVDC at + 200 °C 135D227X0006C2 3.0 36 2 9 - 64 + 13 + 16 135D567X0006F2 2.5 21 3 9 - 77 + 16 + 20 135D827X0006F2 2.5 18 3 14 - 88 + 16 + 20 135D128X0006T2 1.5 18 5 18 - 88 + 20 + 25 135D158X0006T2 1.5 18 5 20 - 90 + 20 + 25 135D228X0006K2 1.0 13 6 24 - 90 + 25 + 30 8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . 4.8 WVDC at + 200 °C 135D187X0008C2 3.0 45 2 9 - 60 + 13 + 16 135D687X0008F2 2.5 22 3 14 - 83 + 16 + 20 135D158X0008T2 1.5 18 5 20 - 90 + 20 + 25 135D188X0008K2 1.0 14 7 25 - 90 + 25 + 30 10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C 135D127X0010C2 3.2 54 2 6 - 40 + 14 + 16 135D157X0010C2 3.0 54 2 9 - 55 + 13 + 16 135D397X0010F2 2.5 27 3 9 - 66 + 16 + 20 135D567X0010F2 2.5 27 3 16 - 77 + 16 + 20 135D128X0010T2 1.5 18 5 20 - 88 + 20 + 25 135D158X0010K2 1.0 15 7 25 - 88 + 25 + 30 15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C 135D826X0015C2 3.9 72 2 6 - 35 + 12 + 16 135D107X0015C2 3.9 72 2 9 - 44 + 13 + 16 135D277X0015F2 2.5 31 3 9 - 62 + 16 + 15 135D397X0015F2 2.5 31 3 16 - 66 + 16 + 20 135D687X0015T2 1.8 22 6 18 - 74 + 20 + 25 135D827X0015T2 1.8 22 6 24 - 77 + 20 + 25 135D108X0015K2 1.2 17 8 32 - 77 + 25 + 30 25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C 135D566X0025C2 4.3 90 2 6 - 25 + 12 + 15 135D686X0025C2 4.3 90 2 9 - 40 + 12 + 15 135D187X0025F2 2.7 33 3 9 - 54 + 13 + 15 135D277X0025F2 2.7 33 3 16 - 62 + 13 + 16 135D477X0025T2 1.8 24 6 18 - 65 + 18 + 25 135D567X0025T2 1.8 24 7 28 - 72 + 20 + 25 135D687X0025K2 1.2 19 8 32 - 72 + 25 + 30 PART NUMBER* MAX. RIPPLE 40 kHz rms 1000 1500 1500 1900 1900 2300 1000 1500 1900 2300 900 900 1450 1450 1850 2300 900 900 1450 1450 1800 1800 2330 850 850 1400 1400 1750 1750 2100 220 560 820 1200 1500 2200 180 680 1500 1800 120 150 390 560 1200 1500 82 100 270 390 680 820 1000 56 68 180 270 470 560 680 C F F T T K C F T K C C F F T K C C F F T T K C C F F T T K Note * Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”. Document Number: 40024 Revision: 10-Oct-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 45 135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation EXTENDED RATINGS CAPACITANCE CASE (µF) CODE MAX. ESR MAX. IMP. MAX. DCL (µA) MAX. CAPACITANCE CHANGE at at at (%) at + 25 °C - 55 °C + 85 °C + 25 °C - 55 °C + 85 °C + 125 °C 120 Hz 120 Hz + 125 °C 30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C. . . 18 WVDC at + 200 °C 135D476X0030C2 5.2 100 2 6 - 23 + 12 + 15 135D566X0030C2 5.2 100 2 9 - 38 + 12 + 15 135D157X0030F2 2.5 36 3 9 - 42 + 13 + 15 135D227X0030F2 2.5 36 3 16 - 60 + 13 + 16 135D397X0030T2 1.8 25 6 18 - 55 + 18 + 25 135D477X0030T2 1.8 25 8 32 - 65 + 20 + 25 135D567X0030K2 1.3 20 9 36 - 65 + 25 + 30 35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C 135D396X0035C2 4.1 61 2 6 - 22 + 12 + 14 135D127X0035F2 2.5 31 3 10 - 40 + 13 + 15 135D337X0035T2 1.8 20 6 18 - 50 + 16 + 25 135D477X0035K2 1.3 15 9 36 - 60 + 25 + 30 50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C 135D336X0050C2 5.0 135 2 9 - 29 + 10 + 12 135D107X0050F2 2.8 49 4 12 - 36 + 13 + 15 135D127X0050F2 2.5 49 4 24 - 42 + 12 + 15 135D277X0050T2 2.0 30 8 32 - 46 + 20 + 25 135D337X0050K2 1.5 30 9 36 - 46 + 25 + 30 60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C . . . 36 WVDC at + 200 °C 135C186X0060C2 7.0 160 2 12 - 20 +7 +8 135D276X0060C2 5.0 144 3 12 - 24 + 10 + 12 135D826X0060F2 2.9 54 4 16 - 30 + 15 + 15 135D107X0060F2 2.5 54 4 20 - 36 + 12 + 15 135D227X0060T2 1.8 29 8 32 - 40 + 16 + 20 135D277X0060K2 1.4 23 9 36 - 45 + 20 + 25 75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . 45 WVDC at + 200 °C 135D226X0075C2 5.1 157 3 12 - 19 + 10 + 12 135D686X0075F2 3.0 63 4 16 - 25 + 12 + 15 135D826X0075F2 2.5 63 4 24 - 30 + 12 + 15 135D187X0075T2 2.2 30 9 36 - 35 + 16 + 20 135D227X0075K2 1.8 24 10 40 - 40 + 20 + 25 100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C 135D106X0100C2 5.9 200 3 12 - 17 + 10 + 12 135D396X0100F2 3.5 80 5 24 - 20 + 12 + 15 135D686X0100T2 2.2 40 10 40 - 30 + 14 + 16 135D127X0100K2 2.7 30 12 48 - 35 + 15 + 17 125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C 135D685X0125C2 11.7 300 3 12 - 14 + 10 + 12 135D276X0125F2 3.5 90 5 24 - 18 + 12 + 15 135D476X0125T2 2.2 50 10 40 - 26 + 14 + 16 135D686X0125K2 2.2 32 11 44 - 28 + 15 + 16 135D826X0125K2 2.8 32 12 48 - 30 + 15 + 17 PART NUMBER* MAX. RIPPLE 40 kHz rms 800 800 1200 1200 1500 1500 2000 820 1315 1640 2040 700 1200 1200 1450 1900 700 700 1100 1100 1400 1850 600 1000 1000 1300 1800 800 1300 1600 2000 700 1200 1500 1850 1900 47 56 150 220 390 470 560 39 120 330 370 33 100 120 270 330 18 27 82 100 220 270 22 68 82 180 220 10 39 68 120 6.8 27 47 68 82 C C F F T T K C F T K C F F T K C C F F T K C F F T K C F T K C F T K K Note * Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit in the part number from “2” to “6”. For RoHS compliant add “E3”. www.vishay.com 46 For technical questions, contact: tantalum@vishay.com Document Number: 40024 Revision: 10-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1