16CTQ060G-1P

16CTQ...GSPbF/16CTQ...G-1PbF Vishay High Power Products Schottky Rectifier, 2 x 8 A 16CTQ...GSPbF 16CTQ...G-1PbF FEATURES • 175 °C TJ operation • Center tap configuration • Low forward voltage drop • High frequency operation Available RoHS* COMPLIANT Base common cathode 2 Base common cathode 2 • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for industrial level 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode DESCRIPTION This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. D2PAK TO-262 PRODUCT SUMMARY IF(AV) VR 2x8A 60/100 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 8 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 16 60/100 650 0.58 - 55 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 16CTQ060GSPbF 16CTQ060G-1PbF 60 16CTQ080GSPbF 16CTQ080G-1PbF 80 16CTQ100GSPbF 16CTQ100G-1PbF 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 148 °C, rectangular waveform 16 650 A 210 7.50 0.50 mJ A SYMBOL TEST CONDITIONS VALUES 8 A UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg TJ = 25 °C, IAS = 0.50 A, L = 60 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94144 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 16CTQ...GSPbF/16CTQ...G-1PbF Vishay High Power Products Schottky Rectifier, 2 x 8 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 8A Maximum forward voltage drop per leg See fig. 1 VFM (1) 16 A 8A 16 A Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 °C VALUES 0.72 0.88 0.58 0.69 0.28 7.0 0.415 11.07 500 8.0 10 000 mA V mΩ pF nH V/µs V UNITS TJ = 125 °C VR = Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink Approximate weight minimum maximum SYMBOL TJ, TStg RthJC RthCS DC operation See fig. 4 Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 175 3.25 °C/W 0.50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) UNITS °C Mounting torque 16CTQ060GS Case style Marking device Case style TO-262 D2PAK 16CTQ080GS 16CTQ100GS 16CTQ060G-1 16CTQ080G-1 16CTQ100G-1 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94144 Revision: 13-Aug-08 16CTQ...GSPbF/16CTQ...G-1PbF Schottky Rectifier, 2 x 8 A Vishay High Power Products 1000 100 IF - Instantaneous Forward Current (A) IR - Reverse Current (mA) TJ = 175 °C 10 TJ = 150 °C 1 0.1 0.01 0.001 TJ = 25 °C 0.0001 0 20 40 60 80 100 TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C 100 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 1000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) TJ = 25 °C 100 0 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94144 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 16CTQ...GSPbF/16CTQ...G-1PbF Vishay High Power Products Schottky Rectifier, 2 x 8 A 180 7 DC Allowable Case Temperature (°C) 160 150 140 130 120 110 See note (1) 100 0 2 4 6 8 10 12 14 Square wave (D = 0.50) 80 % rated VR applied Average Power Loss (W) 170 6 5 4 3 2 1 0 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit DC 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94144 Revision: 13-Aug-08 16CTQ...GSPbF/16CTQ...G-1PbF Schottky Rectifier, 2 x 8 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 16 1 1 2 3 4 5 6 7 - C 2 T 3 Q 4 100 5 G 6 S 7 TRL PbF 8 9 Current rating (16 = 16 A) C = Common cathode T = TO-220, TO-262, D2PAK Q = Schottky “Q” series Voltage ratings G = Schottky generation None = TO-220 -1 = TO-262 S = D2PAK 060 = 60 V 080 = 80 V 100 = 100 V 8 - None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - None = Standard production PbF = Lead (Pb)-free (for D2PAK tube and TO-262) P = Lead (Pb)-free (for D2PAK TRL and TRR) LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information SPICE model http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032 http://www.vishay.com/doc?95279 Document Number: 94144 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1