192P822X9080

Type 192P Pacer® Vishay Sprague Polyester Film/Foil Capacitors Sleeved, Miniature, Axial Lead FEATURES • Axial lead, designed for automatic insertion • Non-inductively wound, extended foil construction • Lead wire has metal end cap for connection to extended foil • Moisture resistant • Encased in an orange heat shrinkable polyolefin sleeve • Available tape and reeled to EIA specifications for automatic insertion PERFORMANCE CHARACTERISTICS Operating Temperature: - 55°C to + 85°C. Capacitance Range: 0.0001µF to 0.39µF. Capacitance Tolerance: ± 20%, ± 10%, ± 5%. Other tolerances available upon request. DC Voltage Rating: 80 WVDC to 600 WVDC. Voltage Derating: At + 105°C: 70% of + 85°C rating. At + 125°C: 50% of + 85°C rating. Dissipation Factor: 1.0% maximum. Voltage Test: 200% of rated voltage for 1 minute. Insulation Resistance: At + 25°C: 100,000 Megohm minimum. At + 85°C: 15,000 Megohm minimum. At + 105°C: 2000 Megohm minimum. At + 125°C: 200 Megohm minimum. PHYSICAL CHARACTERISTICS Lead Pull: 5 pounds (2.3 kilograms) for 1 minute. No physical damage. Lead Bend: After three complete consecutive bends, no damage. Marking: Sprague® trademark, Type 192P, voltage, capacitance, tolerance and date code. ENVIRONMENTAL CHARACTERISTICS DC Life Test: 150% of rated voltage for 250 hours @ + 85°C. No open or short circuits. No visible damage. Maximum ∆ CAP ± 10%, maximum. Minimum ∆ IR 50% of initial limit, minimum. Maximum ∆ DF 1.0%. Humidity Test: 95% relative humidity @ + 40°C for 500 hours. No visible damage. Minimum IR = 50% of initial limit. DIMENSIONS in inches [millimeters] 1.250 [31.750] Min. L Max. 1.250 [31.750] Min. D Max. .032" [0.813] diameter (No. 20 AWG) copper-clad steel leads except that .025" [.635] diameter (No. 22 AWG) leads will be supplied on .153" [3.886] and .185" [4.699] diameter units. CAPACITANCE CHANGE 16 14 12 10 8 6 4 2 0 2 4 6 - 55 -40 - 50 DISSIPATION PERCENT DISSIPATION - 100Hz 1.5 PERCENT CAPACITANCE CHANGE - 1000Hz 1.0 .5 -25 0 + 25 + 50 + 75 + 85 + 105 + 125 + 100 0 - 55 -40 - 50 -25 0 + 25 + 50 + 75 + 85 + 105 + 125 + 100 TEMPERATURE DEG. CENTIGRADE TEMPERATURE DEG. CENTIGRADE www.vishay.com 70 For technical questions, contact spresale@vishay.com Document Number: 42024 Revision 13-Nov-03 Type 192P Pacer® Vishay Sprague STANDARD RATINGS in inches [millimeters] SIZE PART NUMBER D L 80 VDC/55 VAC** 0.437 [11.100] 0.0022 0.153 [3.886] 192P222X9080 0.437 [11.100] 0.0027 0.153 [3.886] 192P272X9080 0.437 [11.100] 0.0033 0.153 [3.886] 192P332X9080 0.437 [11.100] 0.0039 0.153 [3.886] 192P392X9080 0.437 [11.100] 0.0047 0.153 [3.886] 192P472X9080 0.500 [12.700] 0.0056 0.185 [4.699] 192P562X9080 0.500 [12.700] 0.0068 0.185 [4.699] 192P682X9080 0.500 [12.700] 0.0082 192P822X9080 0.185 [4.699] 0.500 [12.700] 0.01 0.185 [4.699] 192P103X9080* 0.562 [14.275] 0.012 0.185 [4.699] 192P123X9080 0.562 [14.275] 0.015 0.185 [4.699] 192P153X9080 0.625 [15.875] 0.018 0.185 [4.699] 192P183X9080 0.625 [15.875] 0.022 192P223X9080* 0.185 [4.699] 0.562 [14.275] 0.027 0.229 [5.817] 192P273X9080 0.562 [14.275] 0.033 0.229 [5.817] 192P333X9080 0.687 [17.450] 0.039 0.229 [5.817] 192P393X9080 0.687 [17.450] 0.047 0.229 [5.817] 192P473X9080* 0.687 [17.450] 0.056 0.250 [6.350] 192P563X9080 0.687 [17.450] 0.068 0.250 [6.350] 192P683X9080 0.645 [16.383] 0.082 0.315 [8.00] 192P823X9080 0.645 [16.383] 0.10 0.315 [8.00] 192P104X9080* 0.770 [19.558] 0.12 0.315 [8.00] 192P124X9080 0.770 [19.558] 0.15 0.315 [8.00] 192P154X9080 0.770 [19.558] 0.18 0.343 [8.712] 192P184X9080 0.770 [19.558] 0.22 0.343 [8.712] 192P224X9080 1.020 [25.908] 0.27 0.343 [8.712] 192P274X9080 1.332 [33.833] 0.33 0.343 [8.712] 192P334X9080 1.332 [33.833] 0.39 0.343 [8.712] 192P394X9080 200 VDC/140 VAC** 192P101X9200 0.437 [11.100] 0.153 [3.886] 0.00010 192P121X9200 0.437 [11.100] 0.153 [3.886] 0.00012 192P151X9200 0.437 [11.100] 0.153 [3.886] 0.00015 192P181X9200 0.437 [11.100] 0.153 [3.886] 0.00018 192P221X9200 0.437 [11.100] 0.153 [3.886] 0.00022 192P271X9200 0.437 [11.100] 0.153 [3.886] 0.00027 192P331X9200 0.437 [11.100] 0.153 [3.886] 0.00033 192P391X9200 0.437 [11.100] 0.153 [3.886] 0.00039 192P471X9200 0.437 [11.100] 0.153 [3.886] 0.00047 192P561X9200 0.437 [11.100] 0.153 [3.886] 0.00056 192P681X9200 0.437 [11.100] 0.153 [3.886] 0.00068 192P821X9200 0.437 [11.100] 0.153 [3.886] 0.00082 192P102X9200 0.437 [11.100] 0.153 [3.886] 0.001 192P122X9200 0.437 [11.100] 0.153 [3.886] 0.0012 192P152X9200 0.437 [11.100] 0.153 [3.886] 0.0015 192P182X9200 0.437 [11.100] 0.185 [4.699] 0.0018 192P222X9200 0.437 [11.100] 0.185 [4.699] 0.0022 192P272X9200 0.437 [11.100] 0.185 [4.699] 0.0027 192P332X9200 0.437 [11.100] 0.185 [4.699] 0.0033 192P392X9200 0.562 [14.275] 0.185 [4.699] 0.0039 192P472X9200 0.562 [14.275] 0.185 [4.699] 0.0047 192P562X9200 0.562 [14.275] 0.185 [4.699] 0.0056 192P682X9200 0.562 [14.275] 0.185 [4.699] 0.0068 192P822X9200 0.625 [15.875] 0.185 [4.699] 0.0082 192P103X9200 0.625 [15.875] 0.185 [4.699] 0.01 Note: Shaded Part Numbers shown above are standard stock items available through the Vishay/Sprague® Distribution Network. Packaging for these items is bulk, however tape and reel packaging is readily available on special order. Also, any non-standard Part Number may always be ordered as a special. In addition, the four Part Numbers indicated by a * when ordered with a ± 5% capacitance tolerance (i.e. Part Number 192P103X5080) are also standard stock items. **60Hz rms. Pacer® is a registered trademark of Sprague®. CAPACITANCE (µF) Document Number: 42024 Revision 13-Nov-03 For technical questions, contact spresale@vishay.com www.vishay.com 71 Type 192P Pacer® Vishay Sprague STANDARD RATINGS in inches [millimeters] CAPACITANCE (µF) 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.00047 0.00056 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 SIZE PART NUMBER 200 VDC/140 VAC** 192P123X9200 192P153X9200 192P183X9200 192P223X9200 192P273X9200 192P333X9200 192P393X9200 192P473X9200 192P563X9200 192P683X9200 192P823X9200 192P104X9200 192P124X9200 192P154X9200 192P184X9200 192P224X9200 400 VDC/200 VAC** 192P471X9400 192P561X9400 192P681X9400 192P821X9400 192P102X9400 192P122X9400 192P152X9400 192P182X9400 192P222X9400 192P272X9400 192P332X9400 192P392X9400 192P472X9400 192P562X9400 192P682X9400 192P822X9400 192P103X9400 192P123X9400 192P153X9400 192P183X9400 192P223X9400 192P273X9400 192P333X9400 192P393X9400 192P473X9400 192P563X9400 192P683X9400 D 0.229 [5.817] 0.229 [5.817] 0.229 [5.817] 0.229 [5.817] 0.250 [6.350] 0.250 [6.350] 0.315 [8.00] 0.315 [8.00] 0.315 [8.00] 0.315 [8.00] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] L 0.562 [14.275] 0.562 [14.275] 0.687 [17.450] 0.687 [17.450] 0.687 [17.450] 0.687 [17.450] 0.645 [16.383] 0.645 [16.383] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 1.020 [25.908] 1.020 [25.908] 1.332 [33.833] 1.332 [33.833] 0.500 [12.700] 0.500 [12.700] 0.500 [12.700] 0.500 [12.700] 0.500 [12.700] 0.500 [12.700] 0.500 [12.700] 0.562 [14.275] 0.562 [14.275] 0.562 [14.275] 0.562 [14.275] 0.562 [14.275] 0.562 [14.275] 0.687 [17.450] 0.687 [17.450] 0.687 [17.450] 0.687 [17.450] 0.645 [16.383] 0.645 [16.383] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 1.020 [25.908] 1.020 [25.908] 1.332 [33.833] 1.332 [33.833] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.185 [4.699] 0.229 [5.817] 0.229 [5.817] 0.229 [5.817] 0.229 [5.817] 0.250 [6.350] 0.250 [6.350] 0.250 [6.350] 0.250 [6.350] 0.315 [8.00] 0.315 [8.00] 0.315 [8.00] 0.315 [8.00] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 600 VDC/200 VAC* 0.00047 192P471X9600 0.185 [4.699] 0.562 [14.275] 0.00056 192P561X9600 0.185 [4.699] 0.562 [14.275] 0.00068 192P681X9600 0.185 [4.699] 0.562 [14.275] 0.00082 192P821X9600 0.185 [4.699] 0.625 [15.875] 0.001 192P102X9600 0.185 [4.699] 0.625 [15.875] 0.0012 192P122X9600 0.229 [5.817] 0.562 [14.275] 0.0015 192P152X9600 0.229 [5.817] 0.562 [14.275] 0.0018 192P182X9600 0.229 [5.817] 0.687 [17.450] 0.0022 192P222X9600 0.229 [5.817] 0.687 [17.450] Note: Shaded Part Numbers shown above are standard stock items available through the Vishay/Sprague® Distribution Network. Packaging for these items is bulk, however tape and reel packaging is readily available on special order. Also, any non-standard Part Number may always be ordered as a special. **60Hz rms. www.vishay.com 72 For technical questions, contact spresale@vishay.com Document Number: 42024 Revision 13-Nov-03 Type 192P Pacer® Vishay Sprague STANDARD RATINGS in inches [millimeters] CAPACITANCE (µF) SIZE PART NUMBER 600 VDC/200 VAC* 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 * 60Hz rms. 192P272X9600 192P332X9600 192P392X9600 192P472X9600 192P562X9600 192P682X9600 192P822X9600 192P103X9600 192P123X9600 192P153X9600 192P183X9600 192P223X9600 192P273X9600 192P333X9600 0.250 [6.350] 0.250 [6.350] 0.315 [8.00] 0.315 [8.00] 0.315 [8.00] 0.315 [8.00] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.343 [8.712] 0.687 [17.450] 0.687 [17.450] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 0.770 [19.558] 1.020 [25.908] 1.020 [25.908] 1.020 [25.908] 1.020 [25.908] 1.332 [33.833] 1.332 [33.833] D L STANDARD MARKING FORMAT SAMPLE MARKING ➁192P200 V 222K9325 ➁ 192P 200 V 222K 9325 DESCRIPTION Sprague® identification Type DC Voltage rating, Volts Capacitance (See How to Order) and Tolerance Weekly date code (i.e. 25th week of 1993) TOLERANCE CODES PER EIA STANDARDS J = ± 5% K = ± 10% M = ± 20% ORDERING INFORMATION 192P TYPE 222 CAPACITANCE X9 CAPACITANCE TOLERANCE X0 = ± 20% X9 = ± 10% X5 = ± 5% 200 DC VOLTAGE RATING T* XXXX This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow (Ex. 222 = 2200pF = .0022µF; 473 = 47000pF = .047µF, etc.) This is expressed in volts. A suffix may be added by the factory to denote special construction, packaging, marking, etc. * Tape & Reel. PACKAGING in inches [millimeters] IF THE "D" DIMENSION IS: THEN ADD THE "P" SUFFIX CLASS I, LEVEL 1, .200" [5.080] PITCH 0.153 [3.886] 0.185 [4.699] P303 P304 CLASS II, LEVEL 1, .400" [10.160] PITCH 0.229 [5.817] 0.250 [6.350] 0.315 [8.00] 0.343 [8.712] P305 P384 P347 P347 1250 1000 1000 750 3000 3000 STANDARD QUANTITY PER REEL** ** Specific quantities can be tape and reeled per EIA Standard RS-296-D. The 192P Pacer® is available in bulk pack or tape and reeled per EIA Standard RS-296-D. A suffix is not required for bulk packaging. Document Number: 42024 Revision 13-Nov-03 For technical questions, contact spresale@vishay.com www.vishay.com 73 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1