2KBP

2KBP Series Vishay High Power Products Single Phase Rectifier Bridge, 2 A FEATURES • Suitable for printed circuit board mounting • Compact construction • High surge current capability • RoHS compliant D-44 RoHS COMPLIANT DESCRIPTION PRODUCT SUMMARY IO VRRM 2A 50 to 1000 V A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO 50 Hz IFSM 60 Hz 50 Hz 60 Hz VRRM TJ CHARACTERISTICS VALUES 2.0 60 A 63 18 16 50 to 1000 - 40 to 150 V °C A2 s UNITS A I2 t ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER 2KBP005 2KBP02 2KBP04 2KBP06 2KBP08 2KBP10 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE (V) 50 200 400 600 800 1000 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE (V) 50 200 400 600 800 1000 VRMS, MAXIMUM RECOMMENDED RMS SUPPLY VOLTAGE (V) 20 80 125 250 380 500 Document Number: 93562 Revision: 17-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 2KBP Series Vishay High Power Products Single Phase Rectifier Bridge, 2 A FORWARD CONDUCTION PARAMETER Maximum DC output current SYMBOL IO TEST CONDITIONS TA = 50 °C, resistive or inductive load TA = 50 °C, capacitive load t = 10 ms, 20 ms IFSM t = 8.3 ms, 16.7 ms t = 10 ms Maximum I2t capability for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t capability for fusing I2√t VFM IRM f Following any rated load condition and with rated VRRM reapplied 100 % VRRM reapplied No voltage reapplied Initial TJ = TJ maximum VALUES 2.0 A 1.8 60 A 63 18 16 26 23 255 1.0 10 1.0 40 to 1000 A2√s V µA mA Hz A2 s UNITS Maximum peak one cycle, non-repetitive surge current t = 0.1 to 10 ms, no voltage reapplied IFM = 1 A, TJ = 25 °C TJ = 25 °C, 100 % VRRM TJ = 150 °C, 100 % VRRM Maximum peak forward voltage per diode Typical peak reverse leakage current per diode Operating frequency range THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating junction and storage temperature range Approximate weight 0.14 oz. SYMBOL TJ, TStg VALUES - 40 to 150 4 UNITS °C g Average Output Current (A) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 Capacitive load Resistive, inductive load Maximum Peak Output Current (A) 2.2 70 60 50 40 30 20 10 0 10-2 From any rated load condition 10-1 1 10 Maximum Allowable Ambient Temperature (°C) Fig. 1 - Ambient Temperature Ratings Pulse Train Duration (s) Fig. 2 - Non-Repetitive Surge Ratings www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93562 Revision: 17-Jun-08 2KBP Series Single Phase Rectifier Bridge, 2 A CIRCUIT CONFIGURATION IO Vishay High Power Products + ~ ~ LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95329 Document Number: 93562 Revision: 17-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1