3N248

KBP005M thru KBP10M, 3N246 thru 3N252 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES • UL recognition file number E54214 • Ideal for printed circuit board • High surge current capability − ~ ~ + Case Style KBPM + ~ ~ − e4 • High case dielectric strength • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for switching power supply, home appliances, office equipment, and telecommunication applications. MECHANICAL DATA Case: KBPM Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked on body PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM IR VF TJ max. 1.5 A 50 V to 1000 V 60 A 5 µA 1.0 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage (1) Maximum RMS voltage (1) Maximum DC blocking voltage (1) Maximum average forward output rectified current at TA = 40 °C Peak forward surge current single half sine-wave (1) Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range (1) Note: (1) JEDEC registered values TA = 25 °C TJ = 150 °C SYMBOL VRRM VRMS VDC IF(AV) IFSM I2t TJ, TSTG KBP 005M 3N246 50 35 50 KBP 01M 3N247 100 70 100 KBP 02M 3N248 200 140 200 KBP 04M 3N249 400 280 400 1.5 60 40 10 - 55 to + 150 KBP 06M 3N250 600 420 600 KBP 08M 3N251 800 560 800 KBP 10M 3N252 1000 700 1000 V V V A A A2s °C UNIT Document Number: 88531 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 KBP005M thru KBP10M, 3N246 thru 3N252 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS 1.0 A 1.57 A TA = 25 °C TA = 125 °C 4.0 V, 1 MHz SYMBOL KBP 005M 3N246 Maximum instantaneous forward voltage drop per diode (1) Maximum DC reverse current at rated DC blocking voltage per diode (1) Typical junction capacitance per diode Note: (1) JEDEC registered values VF KBP 01M 3N247 KBP 02M 3N248 KBP 04M 3N249 1.0 1.3 5.0 500 15 KBP 06M 3N250 KBP 08M 3N251 KBP 10M 3N252 V UNIT IR µA CJ pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL KBP 005M 3N246 Typical thermal resistance (1) RθJA RθJL KBP 01M 3N247 KBP 02M 3N248 KBP 04M 3N249 40 13 KBP 06M 3N250 KBP 08M 3N251 KBP 10M 3N252 °C/W UNIT Note: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x 12 mm) copper pads ORDERING INFORMATION (Example) PREFERRED P/N KBP06M-E4/45 KBP06M-E4/51 3N250-E4/45 3N250-E4/51 UNIT WEIGHT (g) 1.895 1.895 1.895 1.895 PREFERRED PACKAGE CODE 45 51 45 51 BASE QUANTITY 30 600 30 600 DELIVERY MODE Tube Anti-static PVC tray Tube Anti-static PVC tray RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.6 60 Bridge Output Full Wave Rectified Current Average (A) Peak Forward Surge Current (A) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 20 40 60 80 Capacitive Load Ipk 5.0 = 10 IAV 20 (per leg) 60 Hz Resistive or Inductive Load P.C.B. Mounted on 0.47 x 0.47" (12 x 12 mm) Copper Pads Single Half Sine-Wave 50 TA = 25 °C 40 30 TJ = 150 °C 20 10 1.0 Cycle 0 100 120 140 150 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Document Number: 88531 Revision: 15-Apr-08 www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com KBP005M thru KBP10M, 3N246 thru 3N252 Vishay General Semiconductor 100 100 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 1 10 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 10 Instantaneous Reverse Current (µA) TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style KBPM 0.125 x 45° (3.2) 0.600 (15.24) 0.560 (14.22) 0.460 (11.68) 0.500 (12.70) 0.420 (10.67) 0.460 (11.68) 0.60 (15.2) MIN. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6) 0.50 (12.7) MIN. 0.034 (0.86) 0.028 (0.76) DIA. 0.200 (5.08) 0.180 (4.57) 0.105 (2.67) 0.085 (2.16) Polarity shown on front side of case: positive lead by beveled corner Document Number: 88531 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1