3N257

2KBP005M thru 2KBP10M, 3N253 thru 3N259 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES • UL recognition file number E54214 • Ideal for printed circuit board • High surge current capability − ~ ~ + Case Style KBPM + ~ ~ − e4 • High case dielectric strength • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for switching power supply, home appliances, office equipment, and telecommunication applications. MECHANICAL DATA Case: KBPM Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked on body PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM IR VF TJ max. 2A 50 V to 1000 V 60 A 5 µA 1.1 V 165 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Max. average forward output rectified current at TA = 55 °C Peak forward surge current single half sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM I2t TJ, TSTG 2KBP 005M 3N253 50 35 50 2KBP 01M 3N254 100 70 100 2KBP 02M 3N255 200 140 200 2KBP 04M 3N256 400 280 400 2.0 60 15 - 55 to + 165 2KBP 06M 3N257 600 420 600 2KBP 08M 3N258 800 560 800 2KBP 10M 3N259 1000 700 1000 V V V A A A 2s °C UNIT Document Number: 88532 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 2KBP005M thru 2KBP10M, 3N253 thru 3N259 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL 2KBP 005M 3N253 Maximum instantaneous forward voltage drop per diode Maximum DC reverse current at rated DC blocking voltage per diode Typical junction capacitance per diode 3.14 A TA = 25 °C TA = 125 °C 4.0 V, 1 MHz VF IR CJ 2KBP 01M 3N254 2KBP 02M 3N255 2KBP 04M 3N256 1.1 5.0 500 25 2KBP 06M 3N257 2KBP 08M 3N258 2KBP 10M 3N259 V µA pF UNIT THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL 2KBP 005M 3N253 Typical thermal resistance (1) Note: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x 12 mm) copper pads RθJA RθJL 2KBP 01M 3N254 2KBP 02M 3N255 2KBP 04M 3N256 30 11 2KBP 06M 3N257 2KBP 08M 3N258 2KBP 10M 3N259 °C/W UNIT ORDERING INFORMATION (Example) PREFERRED P/N 2KBP06M-E4/45 2KBP06M-E4/51 3N257-E4/45 3N257-E4/51 UNIT WEIGHT (g) 1.895 1.895 1.895 1.895 PREFERRED PACKAGE CODE 45 51 45 51 BASE QUANTITY 30 600 30 600 DELIVERY MODE Tube Anti-static PVC tray Tube Anti-static PVC tray RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.0 60 TJ = 150 °C Single Sine-Wave 50 Average Forward Output Current (A) 1.5 P.C.B. Mounted with 0.47 x 0.47" (12 x 12 mm) Copper Pads Peak Forward Surge Current (A) 60 Hz Resistive or Inductive Load 40 1.0 30 20 0.5 Capacitive Load I(pk) = 5.0 10 I(AV) (Per Leg) 20 20 40 60 80 100 120 140 160 170 10 1.0 Cycle 0 1 10 100 0 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88532 Revision: 15-Apr-08 2KBP005M thru 2KBP10M, 3N253 thru 3N259 Vishay General Semiconductor 100 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 1 10 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 Instantaneous Reverse Current (µA) TJ = 125 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style KBPM 0.125 x 45° (3.2) 0.600 (15.24) 0.560 (14.22) 0.460 (11.68) 0.500 (12.70) 0.420 (10.67) 0.460 (11.68) 0.60 (15.2) MIN. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6) 0.50 (12.7) MIN. 0.034 (0.86) 0.028 (0.76) DIA. 0.200 (5.08) 0.180 (4.57) 0.105 (2.67) 0.085 (2.16) Polarity shown on front side of case: positive lead by beveled corner Document Number: 88532 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1