401CNQ040PBF

401CNQ...PbF Series Vishay High Power Products Schottky Rectifier, 400 A FEATURES • 175 °C TJ operation Lug terminal anode 1 Lug terminal anode 2 • Center tap module • Low forward voltage drop • High frequency operation • Guard ring for enhanced ruggedness and long term reliability TO-244 Base common cathode • Lead (Pb)-free • Designed and qualified for industrial level DESCRIPTION PRODUCT SUMMARY IF(AV) VR 400 A 40/45 V The 401CNQ... center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in high current switching power supplies, converters, freewheeling diodes, welding and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ CHARACTERISTICS Rectangular waveform Range tp = 5 µs sine 200 Apk, TJ = 125 °C (per leg) Range VALUES 400 40/45 25 000 0.56 - 55 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 401CNQ040PbF 40 401CNQ045PbF 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 24 A, L = 1 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 147 °C, rectangular waveform 400 A 25 000 3450 270 40 mJ A SYMBOL TEST CONDITIONS VALUES 200 UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg Document Number: 94205 Revision: 29-Apr-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 401CNQ...PbF Series Vishay High Power Products Schottky Rectifier, 400 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 200 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 400 A 200 A 400 A Maximum reverse leakage current per leg See fig. 2 Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TJ = TJ maximum VALUES 0.67 0.78 0.56 0.69 20 180 10 300 5.0 10 000 mA pF nH V/µs V UNITS VR = Rated VR VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C From top of terminal hole to mounting plane Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg Thermal resistance, junction to case per module Thermal resistance, case to heatsink Weight Mounting torque Mounting torque center hole Terminal torque Vertical pull 2" lever pull SYMBOL TJ, TStg RthJC RthCS MIN. - 55 35.4 (4) 30 (3.4) 30 (3.4) TYP. 0.10 68 2.4 MAX. 175 0.19 0.095 53.1 (6) 40 (4.6) 44.2 (5) 80 35 lbf ⋅ in g oz. lbf ⋅ in (N ⋅ m) °C/W UNITS °C www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94205 Revision: 29-Apr-08 401CNQ...PbF Series Schottky Rectifier, 400 A Vishay High Power Products IF - Instantaneous Forward Current (A) 1000 10 000 TJ = 175 °C IR - Reverse Current (mA) 1000 100 10 1 TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C 100 TJ = 125 °C 10 0.1 0.01 0.001 TJ = 25 °C TJ = 50 °C TJ = 25 °C 0 10 20 30 40 50 1 0 0.2 0.4 0.6 0.8 1.0 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10 000 CT - Junction Capacitance (pF) TJ = 25 °C 1000 0 10 20 30 40 50 60 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 1 0.1 PDM t1 t2 0.01 Single pulse (thermal resistance) 0.001 0.00001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94205 Revision: 29-Apr-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 401CNQ...PbF Series Vishay High Power Products Schottky Rectifier, 400 A 180 175 Allowable Case Temperature (°C) 160 DC Average Power Loss (W) 150 125 100 75 50 25 0 140 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMS limit 100 Square wave (D = 0.50) 80 % rated Vr applied See note (1) 80 0 50 100 150 200 250 300 0 50 100 150 200 250 300 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 100 000 At any rated load condition and with rated VRRM applied following surge 10 000 1000 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94205 Revision: 29-Apr-08 401CNQ...PbF Series Schottky Rectifier, 400 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 40 1 1 2 3 4 5 6 7 - 1 2 C 3 N 4 Q 5 045 PbF 6 7 Average current rating (x 10) Product silicon identification C = Circuit configuration N = Not isolated Q = Schottky rectifier diode Voltage ratings Lead (Pb)-free 040 = 40 V 045 = 45 V LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95021 Document Number: 94205 Revision: 29-Apr-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1