84068

VISHAY Vishay Semiconductors Tape and Reel Standards Package 10´´ tape & reel Quantity / Reel SOD57 SOD64 DO204AP(G1) G3 G4 5.000 2.500 4.500 1.600 2.000 Available Packaging 13´´ tape & reel Quantity / Reel Ammo Pack #1 Quantity / Box 5.000 2.500 3.000 1.000 2.000 Ammo Pack #2 Quantity / Box Taping Specifications SOD57 and SOD64 Package Description Component Pitch Inside Tape Spacing Lead to Lead Eccentricity Lead Extension Lead Bending Cumulative Pitch Exposed Adhesive Tape Width Tape Leader Empty Spaces Polarity Marking Symbol A B ID1-D2I K M P S T Beginning and end of reel or ammo pack. Consecutive missing components not allowed All polarized components shall be oriented in the same direction. The cathode tape shall be colored, and anode tape shall be white or light beige. Specification (mm) 5.0 ± 0.5 52 + 2 mm - 1 mm 1.4 max 0 1.2 max 2.0 per 10 pitch 0.8 max 6.0 ± 0.4 300.0 min < 0.1 % 0.8 (0.031) max. |D1 – D2| = 1.4 (0.055) max. D1 D2 K A P S 0.8 (0.031) max. E B 6.0 ± 0.4 (0.236 ± 0.0157) W Dimensions A, M, K, P, S and T apply to both sides 15802 T Figure 1. Document Number 84068 Rev. 7, 07-Jan-03 www.vishay.com 1 VISHAY Vishay Semiconductors Taping Specification DO204AP(G1), G3 and G4 Packages Package DO204AP(G1) G3, G4 Component Spacing ‘‘A‘‘ (Lead to Lead) 5.0 mm + 0.5 mm (0.197‘‘ ± 0.020‘‘) 10 mm + 0.5 mm (0.394‘‘ ± 0.020‘‘) Inside Tape Spacing‘‘B“ 52.4 mm + 1.5 mm/ - 0.4 mm (2.062‘‘ + 0.059‘‘/ - 0.016‘‘) 52.4 mm + 1.5 mm/ - 0.4 mm (2.062‘‘ + 0.059‘‘/ - 0.016‘‘) Cumulative Pitch Tolerance Not to Exceed 1.5 mm (0.059‘‘) over 6 Consecutive Components (< 68.2 mm) < 1.2 mm 16959 Figure 2. www.vishay.com 2 Document Number 84068 Rev. 7, 07-Jan-03 VISHAY Vishay Semiconductors 10‘‘ Reel Specification (SOD57 and SOD64 Packages) Description Arbor Hole Diameter Reel Diameter Drive Hole Diameter Reel Width Drive / Arbor Hole Spacing Core Material Reel Material W1 Symbol D0 D2 D3 W1 W2 Reel Size 10‘‘ 30 ± 1 mm 250 ± 2 mm 10 ± 1 mm 68 ± 1 mm 27.5 ± 1 mm Plastic Plastic D3 D0 D2 D1 W2 15 801 Figure 3. 13‘‘ Reel Specification (DO204AP(G1), G3 and G4 Packages) C 13.0 Inch/ 330 mm Anode Lead White Tape 91.9 (3.62) Dia. 50.8 (2.00) Dia. 38.1 (1.50) Dia. 14.3 (0.56) Dia. Kraft Paper Cathode Lead Colored Tape 16960 Figure 4. Document Number 84068 Rev. 7, 07-Jan-03 www.vishay.com 3 VISHAY Vishay Semiconductors Ammopack #1 Specification (SOD57 and SOD64 Packages) (Figure 5. ) Description Length Width Height Material: corrugated board (neutral) Symbol Inches A B C 10.25 ± 0.2 2.75 ± 0.2 5.75 ± 0.65 Specification Millimeters 260 ± 5.0 70 ± 5.0 146 ± 16.0 15800 A C Inspection hole (both sides) B Figure 5. Ammopack #2 Specification (DO204AP(G1), G3 and G4 Packages) ( Figure 6. ) Dimension ‘‘A‘‘ 10.0‘‘ (255 mm) Dimension ‘‘B‘‘ 3.15‘‘ (80 mm) Dimension ‘‘C‘‘ 4.53‘‘ (115 mm) C A B 16956 Figure 6. www.vishay.com 4 Document Number 84068 Rev. 7, 07-Jan-03 VISHAY Vishay Semiconductors Preformed Leads (SOD64 Packages) Some types of automatic insertion machines have problems in bending the relatively thick leads of SOD64 Sinterglass Diodes. To overcome this, our diodes can be ordered with preformed leads as follows. Preformed Sinterglass Diodes are shipped in bulk. SUFFIX RA SUFFIX RAS Figure 9. Figure 7. SUFFIX RAP Figure 8. Common bending version: Suffix RA 15/10 RA 17.5/ 10 RAS 15/10 RAS 17.5/ 10 RAP 15/10 RAP 17.5/ 10 A (mm) 15 17.5 H (mm) 10 10 Other bending versions are available on request. Document Number 84068 Rev. 7, 07-Jan-03 www.vishay.com 5