B130

New Product B120 thru B160 Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • Low profile package • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability DO-214AC (SMA) • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency inverters, freewheeling, dc-to-dc converters and polarity protection applications. (Note: These devices are not Q101 qualified.) MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 1.0 A 20 V to 60 V 30 A 0.52 V, 0.75 V 125 °C, 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range VRRM IF(AV) IFSM dV/dt TJ TSTG - 65 to + 125 - 65 to + 150 SYMBOL B120 B12 20 B130 B13 30 B140 B14 40 1.0 30 10 000 - 65 to + 150 B150 B15 50 B160 B16 60 UNIT V V A A V/µs °C °C Document Number: 88946 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product B120 thru B160 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current at rated VR (2) Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms TEST CONDITIONS 1.0 A TA = 25 °C TA = 100 °C SYMBOL VF IR B120 B130 0.52 0.2 6.0 5.0 B140 B150 0.75 B160 UNIT V mA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) P.C.B. mounted with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas SYMBOL RθJA RθJL B120 B130 B140 95 30 B150 B160 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N B140-E3/61T B140-E3/5AT UNIT WEIGHT (g) 0.064 0.064 PREFERRED PACKAGE CODE 61T 5AT BASE QUANTITY 1800 7500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.2 0.8 Resistive or Inductive Load 1.0 B150 ~ B160 B120 ~ B140 0.7 D = 0.8 D = 0.5 0.6 D = 0.3 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 0 0.2 0.4 0.6 0.8 1.0 1.2 D = tp/T tp D = 0.2 D = 0.1 D = 1.0 Average Forward Rectified Current (A) 0.8 B120 ~ B140 0.6 Average Power Loss (W) 0.4 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas T 0.2 0 Lead Temperature (°C) Average Forward Current Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88946 Revision: 19-May-08 New Product B120 thru B160 Vishay General Semiconductor 0.8 0.7 10 Average Power Loss (W) D = 0.5 0.6 D = 0.3 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 D = tp/T tp D = 0.2 D = 0.1 T D = 1.0 Instantaneous Forward Current (A) B150 ~ B160 D = 0.8 TJ = 150 °C TJ = 125 °C 1 TJ = 25 °C 0.1 B150 ~ B160 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Average Forward Current (A) Instantaneous Forward Voltage (V) Figure 3. Forward Power Loss Characteristics Figure 6. Typical Instantaneous Forward Characteristics 40 100 000 Instantaneous Reverse Current (µA) Peak Forward Surge Current (A) B120 ~ B140 B150 ~ B160 10 000 TJ = 150 °C 30 1000 20 100 TJ = 125 °C TJ = 25 °C 10 10 1 0 1 10 100 0.1 10 20 30 40 50 60 70 80 90 100 Number of Cycles at 50 Hz Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Instantaneous Forward Characteristics Figure 7. Typical Reverse Leakage Characteristics 10 1000 TJ = 150 °C TJ = 125 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 1 Junction Capacitance (pF) 100 0.1 TJ = 25 °C B120 ~ B140 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 10 0.1 B120 ~ B140 B150 ~ B160 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics Figure 8. Typical Junction Capacitance Document Number: 88946 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product B120 thru B160 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.066 (1.68) MIN. 0.074 (1.88) MAX. 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88946 Revision: 19-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1