BZW04P15B

BZW04P-5V8 thru BZW04-376 Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. MECHANICAL DATA Case: DO-204AL, molded epoxy over passivated chip Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Note: BZW04-213(B) ~ BZW04-376(B) for commercial grade only DO-204AL (DO-41) PRIMARY CHARACTERISTICS VWM PPPM PD IFSM (uni-directional only) TJ max. 5.8 V to 376 V 400 W 1.5 W 40 A 175 °C DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use B suffix (e.g. BZW04P-6V4B). Electrical characteristics apply in both directions. Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 µs waveform Peak pulse current with a 10/1000 µs waveform (1) Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2) Maximum instantaneous forward voltage at 25 A for uni-directional only Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) VF = 3.5 V for BZW04P(-)188 and below; VF = 5.0 V for BZW04P(-)213 and above Document Number: 88316 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 (3) (1) SYMBOL (Fig. 1) PPPM IPPM PD IFSM VF TJ, TSTG LIMIT 400 See next table 1.5 40 3.5/5.0 - 55 to + 175 UNIT W A W A V °C BZW04P-5V8 thru BZW04-376 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM STAND- REVERSE VOLTAGE PEAK CLAMPING TEMPERATURE TEST PART NUMBER OFF (1) LEAKAGE PULSE VOLTAGE VBR AT IT COEFFICIENT CURRENT VOLTAGE AT V CURRENT AT IPPM OF IT (mA) WM (V) VWM (V) VBR (%/°C) VC (V) ID (4) (µA) IPPM (2) (A) UNI-DIRECTIONAL BI-DIRECTIONAL MIN. MAX. BZW04P5V8 BZW04P5V8B 6.45 7.48 10.0 5.80 1000 38.0 10.5 0.057 BZW04-5V8 BZW04-5V8B 6.45 7.14 10.0 5.80 1000 38.0 10.5 0.057 BZW04P6V4 BZW04P6V4B 7.13 8.25 10.0 6.40 500 35.4 11.3 0.061 BZW04-6V4 BZW04-6V4B 7.13 7.88 10.0 6.40 500 35.4 11.3 0.061 BZW04P7V0 BZW04P7V0B 7.79 9.02 10.0 7.02 200 33.0 12.1 0.065 BZW04-7V0 BZW04-7V0B 7.79 8.61 10.0 7.02 200 33.0 12.1 0.065 BZW04P7V8 BZW04P7V8B 8.65 10.0 1.0 7.78 50 30.0 13.4 0.068 BZW04-7V8 BZW04-7V8B 8.65 9.55 1.0 7.78 50 30.0 13.4 0.073 BZW04P8V5 BZW04P8V5B 9.50 11.0 1.0 8.55 10 27.6 14.5 0.07 BZW04-8V5 BZW04-8V5B 9.50 10.5 1.0 8.55 10 27.6 14.5 0.075 BZW04P9V4 BZW04P9V4B 10.5 12.1 1.0 9.4 5.0 25.7 15.6 0.075 BZW04-9V4 BZW04-9V4B 10.5 11.6 1.0 9.4 5.0 25.7 15.6 0.075 BZW0P10 BZW0P10B 11.4 13.2 1.0 10.2 5.0 24.0 16.7 0.078 BZW04-10 BZW04-10B 11.4 12.6 1.0 10.2 5.0 24.0 16.7 0.078 BZW04P11 BZW04P11B 12.4 14.3 1.0 11.1 5.0 22.0 18.2 0.081 BZW04-11 BZW04-11B 12.4 13.7 1.0 11.1 5.0 22.0 18.2 0.081 BZW04P13 BZW04P13B 14.3 16.5 1.0 12.8 5.0 19.0 21.2 0.084 BZW04-13 BZW04-13B 14.3 15.8 1.0 12.8 5.0 19.0 21.2 0.084 BZW04P14 BZW04P14B 15.2 17.6 1.0 13.6 1.0 17.8 22.5 0.086 BZW04-14 BZW04-14B 15.2 16.8 1.0 13.6 1.0 17.8 22.5 0.086 BZW04P15 BZW04P15B 17.1 19.8 1.0 15.3 1.0 16.0 25.2 0.088 BZW04-15 BZW04-15B 17.1 18.9 1.0 15.3 1.0 16.0 25.2 0.088 BZW04P17 BZW04P17B 19.0 22.0 1.0 17.1 1.0 14.5 27.7 0.090 BZW04-17 BZW04-17B 19.0 21.0 1.0 17.1 1.0 14.5 27.7 0.090 BZW04P19 BZW04P19B 20.9 24.2 1.0 18.8 1.0 13.0 30.6 0.092 BZW04-19 BZW04-19B 20.9 23.1 1.0 18.8 1.0 13.0 30.6 0.092 BZW04P20 BZW04P20B 22.8 26.4 1.0 20.5 1.0 12.0 33.2 0.094 BZW04-20 BZW04-20B 22.8 25.2 1.0 20.5 1.0 12.0 33.2 0.094 BZW04P23 BZW04P23B 25.7 29.7 1.0 23.1 1.0 10.7 37.5 0.096 BZW04-23 BZW04-23B 25.7 28.4 1.0 23.1 1.0 10.7 37.5 0.096 BZW04P26 BZW04P26B 28.5 33.0 1.0 25.6 1.0 9.6 41.5 0.097 BZW04-26 BZW04-26B 28.5 31.5 1.0 25.6 1.0 9.6 41.5 0.097 BZW04P28 BZW04P28B 31.4 36.3 1.0 28.2 1.0 8.8 45.7 0.098 BZW04-28 BZW04-28B 31.4 34.7 1.0 28.2 1.0 8.8 45.7 0.098 BZW04P31 BZW04P31B 34.2 39.6 1.0 30.8 1.0 8.0 49.9 0.099 BZW04-31 BZW04-31B 34.2 37.8 1.0 30.8 1.0 8.0 49.9 0.099 BZW04P33 BZW04P33B 37.1 42.9 1.0 33.3 1.0 7.4 53.9 0.100 BZW04-33 BZW04-33B 37.1 41.0 1.0 33.3 1.0 7.4 53.9 0.100 BZW04P37 BZW04P37B 40.9 47.3 1.0 36.8 1.0 6.7 59.3 0.101 BZW04-37 BZW04-37B 40.9 45.2 1.0 36.8 1.0 6.7 59.3 0.101 BZW04P40 BZW04P40B 44.7 51.7 1.0 40.2 1.0 6.2 64.8 0.101 BZW04-40 BZW04-40B 44.7 49.4 1.0 40.2 1.0 6.2 64.8 0.101 BZW04P44 BZW04P44B 48.5 56.1 1.0 43.6 1.0 5.7 70.1 0.102 BZW04-44 BZW04-44B 48.5 53.6 1.0 43.6 1.0 5.7 70.1 0.102 BZW04P48 BZW04P48B 53.2 61.6 1.0 47.8 1.0 5.2 77.0 0.103 BZW04-48 BZW04-48B 53.2 58.8 1.0 47.8 1.0 5.2 77.0 0.103 BZW04P53 BZW04P53B 58.9 68.2 1.0 53.0 1.0 4.7 85.0 0.104 BZW04-53 BZW04-53B 58.9 65.1 1.0 53.0 1.0 4.7 85.0 0.104 BZW04P58 BZW04P58B 64.6 74.8 1.0 58.1 1.0 4.3 92.0 0.104 BZW04-58 BZW04-58B 64.6 71.4 1.0 58.1 1.0 4.3 92.0 0.104 BZW04P64 BZW04P64B 71.3 82.5 1.0 64.1 1.0 3.9 103 0.105 BZW04-64 BZW04P64B 71.3 78.8 1.0 64.1 1.0 3.9 103 0.105 www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88316 Revision: 22-Oct-08 BZW04P-5V8 thru BZW04-376 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM STAND- REVERSE VOLTAGE PEAK CLAMPING TEMPERATURE TEST PART NUMBER OFF LEAKAGE PULSE VOLTAGE VBR AT IT (1) CURRENT COEFFICIENT VOLTAGE AT V CURRENT AT IPPM IT (mA) OF WM (V) VWM (V) VBR (%/°C) VC (V) ID (4) (µA) IPPM (2) (A) UNI-DIRECTIONAL BI-DIRECTIONAL MIN. MAX. BZW04P70 BZW04P70B 77.9 90.2 1.0 70.1 1.0 3.5 113 0.105 BZW04-70 BZW04-70B 77.9 86.1 1.0 70.1 1.0 3.5 113 0.105 BZW04P78 BZW04P78B 86.5 100 1.0 78.0 1.0 3.2 125 0.105 BZW04-78 BZW04-78B 86.5 95.5 1.0 78.0 1.0 3.2 125 0.105 BZW04P85 BZW04P85B 95.0 110 1.0 85.5 1.0 2.9 137 0.106 BZW04-85 BZW04-85B 95.0 105 1.0 85.5 1.0 2.9 137 0.106 BZW04P94 BZW04P94B 105 121 1.0 94.0 1.0 2.6 152 0.107 BZW04-94 BZW04-94B 105 116 1.0 94.0 1.0 2.6 152 0.107 BZW04P102 BZW04P102B 114 132 1.0 102 1.0 2.4 165 0.107 BZW04-102 BZW04-102B 114 126 1.0 102 1.0 2.4 165 0.107 BZW04P110 BZW04P110B 124 143 1.0 111 1.0 2.2 179 0.107 BZW04-110 BZW04-110B 124 137 1.0 111 1.0 2.2 179 0.107 BZW04P128 BZW04P128B 143 165 1.0 128 1.0 2.0 207 0.108 BZW04-128 BZW04-128B 143 158 1.0 128 1.0 2.0 207 0.108 BZW04P136 BZW04P136B 152 176 1.0 136 1.0 1.8 219 0.108 BZW404-136 BZW404-136B 152 168 1.0 136 1.0 1.8 219 0.108 BZW04P145 BZW04P145B 161 187 1.0 145 1.0 1.7 234 0.108 BZW04-145 BZW04-145B 161 179 1.0 145 1.0 1.7 234 0.108 BZW04P154 BZW04P154B 171 198 1.0 154 1.0 1.6 246 0.108 BZW04-154 BZW04-154B 171 189 1.0 154 1.0 1.6 246 0.108 BZW04P171 BZW04P171B 190 220 1.0 171 1.0 1.5 274 0.108 BZW04-171 BZW04-171B 190 210 1.0 171 1.0 1.5 274 0.108 BZW04P188 BZW04P188B 209 242 1.0 188 1.0 1.4 301 0.108 BZW04-188 BZW04-188B 209 231 1.0 188 1.0 1.4 301 0.108 BZW04P213 BZW04P213B 237 275 1.0 213 1.0 1.2 344 0.110 BZW04-213 BZW04-213B 237 263 1.0 213 1.0 1.2 344 0.110 BZW04P239 BZW04P239B 266 308 1.0 239 1.0 1.1 384 0.110 BZW04-239 BZW04-239B 266 294 1.0 239 1.0 1.1 384 0.110 BZW04P256 BZW04P256B 285 330 1.0 256 1.0 1.0 414 0.110 BZW04-256 BZW04-256B 285 315 1.0 256 1.0 1.0 414 0.110 BZW04P273 BZW04P273B 304 352 1.0 273 1.0 0.90 438 0.110 BZW04-273 BZW04-273B 304 336 1.0 273 1.0 0.90 438 0.110 BZW04P299 BZW04P299B 332 385 1.0 299 1.0 0.80 482 0.110 BZW04-299 BZW04-299B 332 368 1.0 299 1.0 0.80 482 0.110 BZW04P342 BZW04P342B 380 440 1.0 342 1.0 0.75 548 0.110 BZW04-342 BZW04-342B 380 420 1.0 342 1.0 0.75 548 0.110 BZW04P376 BZW04P376B 418 484 1.0 376 1.0 0.67 603 0.110 BZW04-376 BZW04-376B 418 462 1.0 376 1.0 0.67 603 0.110 Notes: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (4) For bi-directional types having VWM of 10 V and less, the ID limit is doubled ORDERING INFORMATION (Example) PREFERRED P/N BZW04P10-E3/54 BZW04P10HE3/54 (1) UNIT WEIGHT (g) 0.350 0.350 PREFERRED PACKAGE CODE 54 54 BASE QUANTITY 5500 5500 DELIVERY MODE 13" diameter paper tape and reel 13" diameter paper tape and reel Note: (1) Automotive grade AEC Q101 qualified Document Number: 88316 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 BZW04P-5V8 thru BZW04-376 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 10 000 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 Measured at Zero Bias PPPM - Peak Pulse Power (kW) 1 CJ - Junction Capacitance (pF) 100 Measured at Stand-Off Voltage VWM 10 0.1 0.1 1 10 100 1000 10 000 1 10 100 1000 td - Pulse Width (µs) VBR - Breakdown Voltage (V) Figure 1. Peak Pulse Power Rating Curve Figure 4. Typical Junction Capacitance Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 100 60 Hz Resistive or Inductive Load 75 75 PD - Power Dissipation (%) 50 50 L = 0.375" (9.5 mm) Lead Lengths 25 25 0 0 25 50 75 100 125 150 175 200 0 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature (°C) TL - Lead Temperature (°C) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 5. Power Derating Curve 150 tr = 10 µs Peak Value IPPM IPPM - Peak Pulse Current, % IRSM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 Peak Forward Surge Current (A) TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current Decays to 50 % of IPPM 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 10 1 10 100 t - Time (ms) Number of Cycles at 60 Hz Figure 3. Pulse Waveform Figure 6. Max. Non-Repetitive Forward Surge Current Uni-Directional Only www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88316 Revision: 22-Oct-08 BZW04P-5V8 thru BZW04-376 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Document Number: 88316 Revision: 22-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1