BZW04P28

BZW04P-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor TransZorb® Transient Voltage Suppressors FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance DO-204AL (DO-41) • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS VWM PPPM PD IFSM (uni-directional only) TJ max. 5.8 V to 376 V 400 W 1.5 W 40 A 175 °C Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication. MECHANICAL DATA Case: DO-204AL, molded epoxy over passivated chip Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Note BZW04-213(B) ~ BZW04-376(B) for commercial grade only DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional BZW04P-6V4B). types, use B suffix (e.g. Electrical characteristics apply in both directions. Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (TA = 25 °C unles otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) SYMBOL PPPM IPPM PD IFSM VF TJ, TSTG LIMIT 400 See next table 1.5 40 3.5/5.0 - 55 to + 175 UNIT W A W A V °C Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2) Maximum instantaneous forward voltage at 25 A for uni-directional only (3) Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) V = 3.5 V for BZW04P(-)188 and below; V = 5.0 V for BZW04P(-)213 and above F F Revision: 12-Jul-11 Document Number: 88316 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04P-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. 6.45 6.45 7.13 7.13 7.79 7.79 8.65 8.65 9.50 9.50 10.5 10.5 11.4 11.4 12.4 12.4 14.3 14.3 15.2 15.2 17.1 17.1 19.0 19.0 20.9 20.9 22.8 22.8 25.7 25.7 28.5 28.5 31.4 31.4 34.2 34.2 37.1 37.1 40.9 40.9 44.7 44.7 48.5 48.5 53.2 53.2 58.9 58.9 64.6 64.6 71.3 71.3 MAX. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PART NUMBER UNI-DIRECTIONAL BZW04P5V8 BZW04-5V8 BZW04P6V4 BZW04-6V4 BZW04P7V0 BZW04-7V0 BZW04P7V8 BZW04-7V8 BZW04P8V5 BZW04-8V5 BZW04P9V4 BZW04-9V4 BZW04P10 BZW04-10 BZW04P11 BZW04-11 BZW04P13 BZW04-13 BZW04P14 BZW04-14 BZW04P15 BZW04-15 BZW04P17 BZW04-17 BZW04P19 BZW04-19 BZW04P20 BZW04-20 BZW04P23 BZW04-23 BZW04P26 BZW04-26 BZW04P28 BZW04-28 BZW04P31 BZW04-31 BZW04P33 BZW04-33 BZW04P37 BZW04-37 BZW04P40 BZW04-40 BZW04P44 BZW04-44 BZW04P48 BZW04-48 BZW04P53 BZW04-53 BZW04P58 BZW04-58 BZW04P64 BZW04-64 Revision: 12-Jul-11 BI-DIRECTIONAL BZW04P5V8B BZW04-5V8B BZW04P6V4B BZW04-6V4B BZW04P7V0B BZW04-7V0B BZW04P7V8B BZW04-7V8B BZW04P8V5B BZW04-8V5B BZW04P9V4B BZW04-9V4B BZW04P10B BZW04-10B BZW04P11B BZW04-11B BZW04P13B BZW04-13B BZW04P14B BZW04-14B BZW04P15B BZW04-15B BZW04P17B BZW04-17B BZW04P19B BZW04-19B BZW04P20B BZW04-20B BZW04P23B BZW04-23B BZW04P26B BZW04-26B BZW04P28B BZW04-28B BZW04P31B BZW04-31B BZW04P33B BZW04-33B BZW04P37B BZW04-37B BZW04P40B BZW04-40B BZW04P44B BZW04-44B BZW04P48B BZW04-48B BZW04P53B BZW04-53B BZW04P58B BZW04-58B BZW04P64B BZW04P64B STANDTEST OFF CURRENT VOLTAGE IT (mA) VWM (V) 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.80 5.80 6.40 6.40 7.02 7.02 7.78 7.78 8.55 8.55 9.4 9.4 10.2 10.2 11.1 11.1 12.8 12.8 13.6 13.6 15.3 15.3 17.1 17.1 18.8 18.8 20.5 20.5 23.1 23.1 25.6 25.6 28.2 28.2 30.8 30.8 33.3 33.3 36.8 36.8 40.2 40.2 43.6 43.6 47.8 47.8 53.0 53.0 58.1 58.1 64.1 64.1 MAXIMUM MAXIMUM MAXIMUM REVERSE PEAK CLAMPING LEAKAGE PULSE VOLTAGE AT VWM CURRENT AT IPPM IPPM (2) (A) ID (4) ( A) VC (V) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 38.0 38.0 35.4 35.4 33.0 33.0 30.0 30.0 27.6 27.6 25.7 25.7 24.0 24.0 22.0 22.0 19.0 19.0 17.8 17.8 16.0 16.0 14.5 14.5 13.0 13.0 12.0 12.0 10.7 10.7 9.6 9.6 8.8 8.8 8.0 8.0 7.4 7.4 6.7 6.7 6.2 6.2 5.7 5.7 5.2 5.2 4.7 4.7 4.3 4.3 3.9 3.9 10.5 10.5 11.3 11.3 12.1 12.1 13.4 13.4 14.5 14.5 15.6 15.6 16.7 16.7 18.2 18.2 21.2 21.2 22.5 22.5 25.2 25.2 27.7 27.7 30.6 30.6 33.2 33.2 37.5 37.5 41.5 41.5 45.7 45.7 49.9 49.9 53.9 53.9 59.3 59.3 64.8 64.8 70.1 70.1 77.0 77.0 85.0 85.0 92.0 92.0 103 103 MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/°C) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.073 0.07 0.075 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 Document Number: 88316 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04P-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. 77.9 77.9 86.5 86.5 95.0 95.0 105 105 114 114 124 124 143 143 152 152 161 161 171 171 190 190 209 209 237 237 266 266 285 285 304 304 332 332 380 380 418 418 MAX. 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 308 294 330 315 352 336 385 368 440 420 484 462 MAXIMUM MAXIMUM MAXIMUM REVERSE PEAK CLAMPING LEAKAGE PULSE VOLTAGE AT VWM CURRENT AT IPPM IPPM (2) (A) ID (4) ( A) VC (V) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 3.5 3.5 3.2 3.2 2.9 2.9 2.6 2.6 2.4 2.4 2.2 2.2 2.0 2.0 1.8 1.8 1.7 1.7 1.6 1.6 1.5 1.5 1.4 1.4 1.2 1.2 1.1 1.1 1.0 1.0 0.90 0.90 0.80 0.80 0.75 0.75 0.67 0.67 113 113 125 125 137 137 152 152 165 165 179 179 207 207 219 219 234 234 246 246 274 274 301 301 344 344 384 384 414 414 438 438 482 482 548 548 603 603 MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/°C) 0.105 0.105 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PART NUMBER UNI-DIRECTIONAL BZW04P70 BZW04-70 BZW04P78 BZW04-78 BZW04P85 BZW04-85 BZW04P94 BZW04-94 BZW04P102 BZW04-102 BZW04P110 BZW04-110 BZW04P128 BZW04-128 BZW04P136 BZW404-136 BZW04P145 BZW04-145 BZW04P154 BZW04-154 BZW04P171 BZW04-171 BZW04P188 BZW04-188 BZW04P213 BZW04-213 BZW04P239 BZW04-239 BZW04P256 BZW04-256 BZW04P273 BZW04-273 BZW04P299 BZW04-299 BZW04P342 BZW04-342 BZW04P376 BZW04-376 BI-DIRECTIONAL BZW04P70B BZW04-70B BZW04P78B BZW04-78B BZW04P85B BZW04-85B BZW04P94B BZW04-94B BZW04P102B BZW04-102B BZW04P110B BZW04-110B BZW04P128B BZW04-128B BZW04P136B BZW404-136B BZW04P145B BZW04-145B BZW04P154B BZW04-154B BZW04P171B BZW04-171B BZW04P188B BZW04-188B BZW04P213B BZW04-213B BZW04P239B BZW04-239B BZW04P256B BZW04-256B BZW04P273B BZW04-273B BZW04P299B BZW04-299B BZW04P342B BZW04-342B BZW04P376B BZW04-376B STANDTEST OFF CURRENT VOLTAGE IT (mA) VWM (V) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 70.1 70.1 78.0 78.0 85.5 85.5 94.0 94.0 102 102 111 111 128 128 136 136 145 145 154 154 171 171 188 188 213 213 239 239 256 256 273 273 299 299 342 342 376 376 Notes (1) Pulse test: t  50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (4) For bi-directional types having V WM of 10 V and less, the ID limit is doubled ORDERING INFORMATION (Example) PREFERRED P/N BZW04P10-E3/54 BZW04P10HE3/54 (1) Note (1) AEC Q101 qualified UNIT WEIGHT (g) 0.350 0.350 PREFERRED PACKAGE CODE 54 54 BASE QUANTITY 550 550 DELIVERY MODE 13" diameter paper tape and reel 13" diameter paper tape and reel Revision: 12-Jul-11 Document Number: 88316 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04P-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 10 000 PPPM - Peak Pulse Power (kW) 10 CJ - Junction Capacitance (pF) Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 Measured at Zero Bias 1 100 Measured at Stand-Off Voltage VWM 10 0.1 0.1 1 10 100 1000 10 000 1 10 100 1000 td - Pulse Width (µs) VBR - Breakdown Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 100 60 Hz Resistive or Inductive Load 75 75 PD - Power Dissipation (%) 50 50 L = 0.375" (9.5 mm) Lead Lengths 25 25 0 0 25 50 75 100 125 150 175 200 0 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature (°C) TL - Lead Temperature (°C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Power Derating Curve 150 tr = 10 µs Peak Value IPPM IPPM - Peak Pulse Current, % IRSM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 Peak Forward Surge Current (A) TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current Decays to 50 % of IPPM 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 10 1 10 100 t - Time (ms) Number of Cycles at 60 Hz Fig. 3 - Pulse Waveform Fig. 6 - Max. Non-Repetitive Forward Surge Current Uni-Directional Only Revision: 12-Jul-11 Document Number: 88316 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04P-5V8 thru BZW04-376 www.vishay.com PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) Vishay General Semiconductor 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.026 (0.66) 0.023 (0.58) DIA. Revision: 12-Jul-11 Document Number: 88316 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1