GL05-HT3

VISHAY GL05 - HT3 Vishay Semiconductors Low Capacitance ESD Protection Diodes for High-Speed Data Interfaces Features • Transient protection for data lines as per IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact) IEC 61000-4-5 (Lightning) 17 A (tp = 8/ 20 µs) • Small package for use in portable electronics 17914 3 Top view 1 2 Pin 1 • Low capacitance for high speed data lines, cellular handsets, USB port protection, LAN equipment, peripherals • Space saving LiLiPut package Mechanical Data Case: LLP75-3B Plastic Package Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals Weight: 5 mg Parts Table Part GL05-HT3 Ordering code GL05-HT3-GS08 50 Marking Remarks Tape and Reel Absolute Maximum Ratings Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Peak pulse power ESD voltage Test condition 8/20 µs waveform ESD per IEC 61000-4-2 Symbol PPK VESD Value 300 >25 Unit W kV Thermal Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Operation temperature Storage temperature Test condition Symbol TJ Tstg, TSTG Value - 55 to + 125 - 55 to + 150 Unit °C °C Electrical Characteristics Part Number Marking Code VRWM VBR(min) IR(max) VC(max) IPPM Cj Pin1 to Pin2 Pin3 NC VR = 0 V f = 1 MHz pF 5 @ It = 1.0 mA V GL05-HT3 50 5 V 6 @ VRWM µA 20 IPP = 1.0 A V 9.8 IPP = 5.0 A tp = 8/20 µs A 11 17 Document Number 85823 Rev. 3, 03-Jun-03 www.vishay.com 1 GL05 - HT3 Vishay Semiconductors Package Dimensions in mm VISHAY 18057 ISO Method E www.vishay.com 2 Document Number 85823 Rev. 3, 03-Jun-03 VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. GL05 - HT3 Vishay Semiconductors 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85823 Rev. 3, 03-Jun-03 www.vishay.com 3