MBR1045

MBR10.. Series Vishay High Power Products Schottky Rectifier, 10 A FEATURES Base cathode 2 • • • • • TO-220AC 1 Cathode 3 Anode 150 °C TJ operation TO-220 package High frequency operation Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Designed and qualified for industrial level PRODUCT SUMMARY IF(AV) VR IRM 10 A 35/45 V 15 mA at 125 °C DESCRIPTION This Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) IFRM VRRM IFSM VF TJ tp = 5 µs sine 10 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform TC = 135 °C VALUES 10 20 35/45 1060 0.57 - 65 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM MBR1035 35 MBR1045 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Peak repetitive forward current SYMBOL IF(AV) IFRM TEST CONDITIONS TC = 135 °C, rated VR Rated VR, square wave, 20 kHz, TC = 135 °C 5 µs sine or 3 µs rect. pulse Non-repetitive peak surge current IFSM Following any rated load condition and with rated VRRM applied VALUES 10 20 1060 A 150 8 2 mJ A UNITS A Surge applied at rated load conditions halfwave, single phase, 60 Hz TJ = 25 °C, IAS = 2 A, L = 4 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Non-repetitive avalanche energy Repetitive avalanche current EAS IAR Document Number: 93437 Revision: 22-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 MBR10.. Series Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 20 A Maximum forward voltage drop VFM (1) 10 A 20 A Maximum instantaneous reverse current Threshold voltage Forward slope resistance Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured from top of terminal to mounting plane Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C VALUES 0.84 0.57 0.72 0.1 15 0.354 17.6 600 8.0 10 000 mA V mΩ pF nH V/µs V UNITS Schottky Rectifier, 10 A Rated DC voltage THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-220AC SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 65 to 150 - 65 to 175 2.0 °C/W 0.50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) UNITS °C Mounting torque Marking device MBR1035 MBR1045 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93437 Revision: 22-Aug-08 MBR10.. Series Schottky Rectifier, 10 A Vishay High Power Products IF - Instantaneous Forward Current (A) 100 100 IR - Reverse Current (mA) 10 1 0.1 0.01 0.001 0.0001 TJ = 25 °C TJ = 125 °C TJ = 150 °C 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 5 10 15 20 25 30 35 40 45 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 CT - Junction Capacitance (pF) TJ = 25 °C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1.0 10 100 0.01 0.00001 0.0001 0.001 0.01 0.1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93437 Revision: 22-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 MBR10.. Series Vishay High Power Products 150 Schottky Rectifier, 10 A 10 Allowable Case Temperature (°C) 145 140 135 130 125 See note (1) 120 0 3 6 9 12 15 Square wave (D = 0.50) Rated VR applied DC Average Power Loss (W) 8 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit 6 4 2 DC 0 0 2 4 6 8 10 12 14 16 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93437 Revision: 22-Aug-08 MBR10.. Series Schottky Rectifier, 10 A Vishay High Power Products ORDERING INFORMATION TABLE Device code MBR 1 10 2 45 3 4 1 2 3 4 - Schottky MBR series Currrent rating (10 = 10 A) Voltage ratings None = Standard production PbF = Lead (Pb)-free 35 = 35 V 45 = 45 V LINKS TO RELATED DOCUMENTS Dimensions Part marking information SPICE model http://www.vishay.com/doc?95221 http://www.vishay.com/doc?95224 http://www.vishay.com/doc?95293 Document Number: 93437 Revision: 22-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1