MKC1860-422

MKC 1860 Not for new designs Vishay Roederstein Metallized Polycarbonate Film Capacitor Related Document: IEC 60384-6 Dimensions in millimeters Ød FEATURES Product is completely lead (Pb)-free. Product is RoHS compliant. RATED VOLTAGES (UR) 40.0 ± 5.0 L Max. 40.0 ± 5.0 D Max. 63 VDC, 100 VDC, 250 VDC, 400 VDC e3 RoHS COMPLIANT PERMISSIBLE AC VOLTAGES (RMS) UP TO 60HZ 40 VAC, 63 VAC, 160 VAC, 200 VAC D ≤ 7.0 < 16.0 ≥ 16.5 ØD 0.7 0.8 1.0 TEST VOLTAGE (ELECTRODE/ELECTRODE) 1.6 x UR for 2 s MAIN APPLICATIONS MARKING Storage, filter, timing and integrating circuits. Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C ≤ 0.33µF and UR > 100 VDC: 30,000 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: 15,000 MΩ minimum value (50,000 MΩ typical value) INSULATION RESISTANCE TIME CONSTANT DIELECTRIC Polycarbonate film ELECTRODES COATING Vacuum deposited aluminum Plastic-wrapping, epoxy resin sealed Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C > 0.33µF and UR > 100 VDC: 10,000 s minimum value (40,000 s typical value) For C > 0.33µF and UR ≤ 100 VDC: 5,000 s minimum value (15,000 s typical value) CAPACITANCE DRIFT Up to + 40°C, ± 2% for a period of two years CONSTRUCTION LEADS DERATING FOR DC AND AC. CATEGORY VOLTAGE UC At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR Extended metallized film (refer to general information) Tinned wire SELF INDUCTANCE ~ 12 nH measured with 6mm long leads IEC TEST CLASSIFICATION 55/100/21, according to IEC 60068 PULL TEST ON LEADS ≥ 20 N in direction of leads according to IEC 60068-2-21 OPERATING TEMPERATURE RANGE - 55°C to + 100°C 0.01µF to 10µF BEND TEST ON LEADS RELIABILITY 2 bends through 90° with half of the force used in pull test Operational life > 300,000 h Failure rate < 1 FIT (40°C and 0.5 x UR) For further details, please refer to the general information available at www.vishay.com/doc?26033. CAPACITANCE RANGE CAPACITANCE TOLERANCES ± 10% (K), ± 5% (J) MAXIMUM PULSE RISE TIME CAPACITOR LENGTH (mm) 14 19 26.5 31.5 63 VDC 17 9 6 5 Maximum Pulse Rise Time dv/dt [V/µs] 100 VDC 250 VDC 23 38 13 21 8 13 6 10 400 VDC 61 33 20 16 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Document Number: 26028 Revision: 05-Jul-05 For technical questions contact; dc-film@vishay.com www.vishay.com 1 MKC 1860 Vishay Roederstein DISSIPATION FACTOR TAN δ MEASURED AT 1kHz 10kHz 100kHz C ≤ 0.1µF 3 x 10-3 4 x 10-3 10 x 10-3 0.1µF < C ≤ 1.0µF 3 x 10-3 4 x 10-3 — Maximum values C > 1.0µF 3 x 10-3 — — Metallized Polycarbonate Film Capacitor Related Document: IEC 60384-6 CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 06 63 VDC/ 40 VAC D L — — — — — — — — 14.0 14.0 14.0 19.0 19.0 19.0 19.0 26.5 26.5 31.5 31.5 D VOLTAGE CODE 01 100 VDC/ 63 VAC L — — — — — — 6.0 6.0 6.0 6.0 7.0 8.0 9.0 9.0 10.5 12.5 13.0 15.5 17.5 — — — 14.0 14.0 14.0 19.0 19.0 19.0 19.0 26.5 26.5 26.5 31.5 31.5 31.5 D VOLTAGE CODE 25 250 VDC/ 160 VAC L — — — 14.0 14.0 14.0 14.0 14.0 19.0 19.0 19.0 26.5 26.5 31.5 31.5 — — — — D VOLTAGE CODE 40 400 VDC/ 200 VAC L 14.0 14.0 14.0 14.0 14.0 14.0 19.0 19.0 26.5 26.5 26.5 31.5 31.5 — — — — — — 0.01µF 0.015µF 0.022µF 0.033µF 0.047µF 0.068µF 0.10µF 0.15µF 0.22µF 0.33µF 0.47µF 0.68µF 1.0µF 1.5µF 2.2µF 3.3µF 4.7µF 6.8µF 10µF Further C-values upon request pcm = L + 3.5 - 310 - 315 - 322 - 333 - 347 - 368 - 410 - 415 - 422 - 433 - 447 - 468 - 510 - 515 - 522 - 533 - 547 - 568 - 610 — — — — — — — — 6.0 6.0 7.0 6.5 7.5 8.5 9.0 9.5 11.0 12.0 14.0 — — — — — 6.0 6.0 6.0 7.0 7.5 7.0 8.0 9.5 9.0 10.5 11.5 13.5 — — — — 6.0 6.0 6.0 6.0 7.0 8.0 7.5 8.5 8.5 10.0 11.5 12.0 14.5 — — — — — — RECOMMENDED PACKAGING LETTER CODE G R — TYPE OF PACKAGING AMMO REEL BULK REEL DIAMETER (mm) — 350 — ORDERING CODE EXAMPLE MKC 1860-422/404-G MKC 1860-422/404-R MKC 1860-422/404 X X X www.vishay.com 2 For technical questions contact; dc-film@vishay.com Document Number: 26028 Revision: 05-Jul-05 MKC 1860 Metallized Polycarbonate Film Capacitor Related Document: IEC 60384-6 Vishay Roederstein 100 7 5 3 2 10 7 5 3 2 1 102 63 VDC 2 3 57 103 2 3 10 .0 Capacitance in μF 0.2 2 0.3 3 0.4 4.7 2 .2 100 7 5 3 2 10 7 5 3 2 VRMS VRMS 0.1 0.3 10 .0 6. 8 3 0.4 3.3 7 0.6 7 0.6 1.5 8 1.0 2.2 8 1.5 1.0 57 104 2 3 57 f [Hz] 105 1 102 100 VDC 2 3 5 7 103 Capacitance in μF 2 3 5 7 104 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency 1000 7 5 3 2 0.0 Capacitance in μF VRMS 1000 7 5 3 2 VRMS Capacitance in μF 0.0 100 7 5 3 2 10 102 250 VDC 2 3 57 103 2 3 2.2 1 .5 33 0.0 47 1 47 0.1 1.0 0.6 100 7 5 3 2 400 VDC 105 10 102 2 3 5 7 103 2 3 0.0 0.1 5 8 0.3 3 0.2 2 0.0 68 1.0 0 .68 0.1 0.4 7 0. 33 0 .2 2 57 104 2 3 57 f [Hz] 5 7 104 2 3 Permissible AC Voltage versus Frequency 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Document Number: 26028 Revision: 05-Jul-05 For technical questions contact; dc-film@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1