MMBZ5225-V-G

MMBZ5225-V-G to MMBZ5267-V-G www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar power Zener diodes. 3 • Standard Zener voltage tolerance is ± 5 % with a “B” suffix (e.g.: MMBZ5225B-V-G), suffix “C” is ± 2 % tolerance 1 2 • High temperature soldering guaranteed: 260 °C/4 x 10 s at terminals • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS PARAMETER VZ range nom. Test current IZT VZ specification Int. construction VALUE 3 to 75 1.7 to 20 Thermal equilibrium Single UNIT V mA Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 ORDERING INFORMATION DEVICE NAME MMBZ5225-V-G to MMBZ5267-V-G MMBZ5225-V-G to MMBZ5267-V-G ORDERING CODE MMBZ5225-V-G to MMBZ5267-V-Gseries-18 MMBZ5225-V to MMBZ5267-V-G-series-08 TAPED UNITS PER REEL 10 000 (8 mm tape on 13" reel) 3000 (8 mm tape on 7" reel) MINIMUM ORDER QUANTITY 10 000/box 15 000/box PACKAGE PACKAGE NAME SOT-23 WEIGHT 8.1 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction temperature, maximum Storage temperature range TEST CONDITION On FR - 5 board using recommended solder pad layout On alumina substrate See table “Caharacteristics” On FR - 5 board using recommended solder pad layout RthJA Tj Tstg 556 150 - 65 to + 175 K/W °C °C SYMBOL Ptot Ptot VALUE 225 300 UNIT mW mW Rev. 1.2, 24-Nov-11 Document Number: 85183 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ5225-V-G to MMBZ5267-V-G www.vishay.com Vishay Semiconductors REVERSE LAEKAGE CURRENT IR at VR μA 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 MAX. 50 25 15 10 5 5 5 5 5 5 3 3 3 3 3 3 2 1 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 V 1 1 1 1 1 2 2 3 3.5 4 5 6 6.5 6.5 7 8 8.4 9.1 9.9 10 11 12 13 14 14 15 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 MAX. 30 28 24 23 22 19 17 11 7 7 5 6 8 8 10 17 22 30 13 15 16 17 19 21 23 25 29 33 35 41 44 49 58 70 80 93 105 125 150 170 185 230 270 ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE VZ at IZT1 V MMBZ5225-V-G MMBZ5226-V-G MMBZ5227-V-G MMBZ5228-V-G MMBZ5229-V-G MMBZ5230-V-G MMBZ5231-V-G MMBZ5232-V-G MMBZ5233-V-G MMBZ5234-V-G MMBZ5235-V-G MMBZ5236-V-G MMBZ5237-V-G MMBZ5238-V-G MMBZ5239-V-G MMBZ5240-V-G MMBZ5241-V-G MMBZ5242-V-G MMBZ5243-V-G MMBZ5244-V-G MMBZ5245-V-G MMBZ5246-V-G MMBZ5247-V-G MMBZ5248-V-G MMBZ5249-V-G MMBZ5250-V-G MMBZ5251-V-G MMBZ5252-V-G MMBZ5253-V-G MMBZ5254-V-G MMBZ5255-V-G MMBZ5256-V-G MMBZ5257-V-G MMBZ5258-V-G MMBZ5259-V-G MMBZ5260-V-G MMBZ5261-V-G MMBZ5262-V-G MMBZ5263-V-G MMBZ5264-V-G MMBZ5265-V-G MMBZ5266-V-G MMBZ5267-V-G 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 NOM. 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9 8.5 7.8 7.4 7 6.6 6.2 5.6 5.2 5 4.6 4.5 4.2 3.8 3.4 3.2 3 2.7 2.5 2.2 2.1 2 1.8 1.7 TEST CURRENT IZT1 mA IZT2 DYNAMIC RESISTANCE (2) ZZ at IZT1 ZZK at IZT2  MAX. 1600 1600 1700 1900 2000 1900 1600 1600 1600 1000 750 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1400 1600 1700 TEMPERATURE COEFFICIENT VZ %/°C TYP. - 0.075 - 0.07 - 0.065 - 0.06 - 0.055 ± 0.030 ± 0.030 0.038 0.038 0.045 0.05 0.058 0.062 0.065 0.068 0.075 0.076 0.077 0.079 0.082 0.082 0.083 0.084 0.085 0.086 0.086 0.087 0.087 0.089 0.09 0.091 0.091 0.092 0.093 0.094 0.095 0.095 0.096 0.096 0.097 0.097 0.097 0.098 Notes • Maximum VF = 0.9 V, at IF = 10 mA (1) Measured at thermal equilibrium (2) The Zener impedance is derived from the 1 kHZ AC voltage which results when an AC current having an RMS value equal to 10 % of the Zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener Impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units Rev. 1.2, 24-Nov-11 Document Number: 85183 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ5225-V-G to MMBZ5267-V-G www.vishay.com BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) mA 103 102 mW 250 Vishay Semiconductors IF 10 1 10-1 10-2 10-3 10-4 10-5 0 18114 Ptot TJ = 100 °C 200 150 TJ = 25 °C 100 50 0 0.2 0.4 0.6 0.8 1V 18672 0 100 200 °C VF Tamb Fig. 1 - Forward Characteristics Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters (inches): SOT-23 3.1 (0.122) 2.8 (0.110) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.2 (0.008) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.45 (0.018) 1.43 (0.056) 1.20 (0.047) 0.35 (0.014) Foot print recommendation: 0.7 (0.028) 2 (0.079) 1 (0.039) 0.9 (0.035) 1 (0.039) 0.9 (0.035) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 0.95 (0.037) Rev. 1.2, 24-Nov-11 Document Number: 85183 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0.9 (0.035) 0° t 0.5 (0.020) o8 ° 0.9 (0.035) Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000