PC9EBR10K

PC Vishay Dale Inductors Subminiature, Shielded FEATURES • • • • • • • • Classification is Grade 1, Class B Subminiature shielded Inductance range is 0.10 µH to 100 000 µH Printed board mounting facilitated by 0.200" [5.08 mm] grid spacing Radial lead fixed inductor High Q values Unitized epoxy-molded construction Shielded construction to allow maximum packaging RoHS COMPLIANT density ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % Dielectric Strength: 840 VRMS at sea level Working Voltage: 300 VDC Q and SRF Values: Minimum not less than 80 % of specified value Maximum Current: Based on temperature rise not to exceed 35 °C at + 90 °C ambient DENSITY SPECIFICATIONS Weight: 1.5 grams maximum Shielding: 3 % coupling maximum when two units are tested side by side ENVIRONMENTAL SPECIFICATIONS Moisture: Per MIL-STD-202, Method 106 Vibration: Low frequency, 10 Hz to 55 Hz at 0.06" [1.52 mm] maximum total excursion at rate of 1 linear sweep per minute for 2 hours repeated for each of three mutually perpendicular planes Shock: 100 g, 6 ms, body mounted MECHANICAL SPECIFICATIONS Operating Temperature: - 55 °C to + 125 °C Terminal Pull: 3 pounds DIMENSIONS in inches [millimeters] 0.265 ± 0.010 [6.73 ± 0.254] Dia. 0.300 ± 0.010 [7.62 ± 0.254] 0.270 [6.86] Max. 3/8 ± 1/16 [9.52 ± 1.59] #24 0.020 ± 0.002 [0.508 ± 0.051] TCW 0.080 ± 0.010 [2.03 ± 0.254] 0.200 ± 0.005 [5.08 ± 0.127] STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. (µH) TOL. Q NOM. TEST FREQ. (MHz) SELF-RESONANT FREQ. NOM. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) INCREMENTAL* CURRENT (mA) 2500 2500 2500 2400 2300 2200 2200 2100 2100 2000 PC 0.10 ± 10 % 70 25 > 250 0.030 2500 PC 0.12 ± 10 % 70 25 > 250 0.030 2500 PC 0.15 ± 10 % 70 25 > 250 0.030 2500 PC 0.18 ± 10 % 70 25 > 250 0.035 2400 PC 0.22 ± 10 % 70 25 > 250 0.038 2300 PC 0.27 ± 10 % 80 25 > 250 0.040 2200 PC 0.33 ± 10 % 80 25 > 250 0.040 2200 PC 0.39 ± 10 % 80 25 250 0.045 2100 PC 0.47 ± 10 % 80 25 230 0.045 2100 PC 0.56 ± 10 % 80 25 220 0.050 2000 * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value. Document Number: 34070 Revision: 10-Aug-06 For technical questions contact magnetics@vishay.com www.vishay.com 45 PC Vishay Dale Inductors, Subminiature, Shielded STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. (µH) TOL. Q NOM. TEST FREQ. (MHz) SELF-RESONANT FREQ. NOM. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) INCREMENTAL* CURRENT (mA) 1900 1800 1700 1670 1540 1470 1410 1380 1200 1135 985 950 853 720 620 545 520 504 460 418 398 385 350 333 330 320 300 190 175 150 125 120 110 105 100 90 80 70 65 PC 0.68 ± 10 % 80 25 190 0.055 1900 PC 0.82 ± 10 % 85 25 180 0.060 1800 PC 1.0 ± 10 % 85 25 160 0.070 1700 PC 1.2 ± 10 % 90 7.9 170 0.085 1670 PC 1.5 ± 10 % 100 7.9 155 0.100 1540 PC 1.8 ± 10 % 115 7.9 135 0.110 1470 PC 2.2 ± 10 % 110 7.9 120 0.120 1410 PC 2.7 ± 10 % 110 7.9 104 0.125 1380 PC 3.3 ± 10 % 90 7.9 93 0.165 1200 PC 3.9 ± 10 % 90 7.9 87 0.180 1135 PC 4.7 ± 10 % 95 7.9 79 0.245 985 PC 5.6 ± 10 % 95 7.9 72 0.265 950 PC 6.8 ± 10 % 85 7.9 63 0.330 853 PC 8.2 ± 10 % 95 7.9 60 0.460 720 PC 10 ± 10 % 90 7.9 54 0.640 620 PC 12 ± 10 % 120 2.5 37 0.800 545 PC 15 ± 10 % 120 2.5 28.8 0.865 520 PC 18 ± 10 % 115 2.5 23.8 0.940 504 PC 22 ± 10 % 125 2.5 21.3 1.03 460 PC 27 ± 10 % 115 2.5 20.6 1.18 418 PC 33 ± 10 % 120 2.5 18.6 1.30 398 PC 39 ± 10 % 120 2.5 17.7 1.41 385 PC 47 ± 10 % 110 2.5 14.9 1.61 350 PC 56 ± 10 % 115 2.5 13.9 2.08 330 PC 68 ± 10 % 105 2.5 12.9 2.20 320 PC 82 ± 10 % 105 2.5 11.7 2.42 300 PC 100 ± 10 % 95 2.5 10.5 2.15 333 PC 120 ± 10 % 95 0.79 5.6 2.38 316 PC 150 ± 10 % 90 0.79 5.2 2.52 306 PC 180 ± 10 % 95 0.79 4.9 2.88 288 PC 220 ± 10 % 95 0.79 4.6 3.18 273 PC 270 ± 10 % 100 0.79 4.2 3.50 260 PC 330 ± 10 % 100 0.79 3.55 4.80 222 PC 390 ± 10 % 100 0.79 3.45 5.44 209 PC 470 ± 10 % 100 0.79 3.2 5.9 201 PC 560 ± 10 % 95 0.79 2.9 6.3 194 PC 680 ± 10 % 100 0.79 2.7 7.2 181 PC 820 ± 10 % 90 0.79 2.5 8.0 172 PC 1000 ± 10 % 100 0.79 2.35 12 141 * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value. MARKING - Manufacturer data printed ORDERING INFORMATION PC MODEL 0.10 µH INDUCTANCE VALUE 10 % INDUCTANCE TOLERANCE EB PACKAGE CODE e2 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER P C MODEL 9 E B R 1 INDUCTANCE VALUE 0 K INDUCTANCE TOLERANCE PACKAGE CODE www.vishay.com 46 For technical questions contact magnetics@vishay.com Document Number: 34070 Revision: 10-Aug-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1