PLTT2512Z2500QGTF

PLTT Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance FEATURES • • • • • • • • • • • • - 55 °C to 215 °C operating temperature range TCR of ± 5 ppm/°C standard Tolerances to ± 0.02 % Anti corrosion resistant film with (SPM) special passivation method Stable film and performance characteristics 0.5 % max. at 2000 h, 215 °C, 25 % rated power Non-standard resistance values available Very low noise and voltage coefficient (< - 30 dB, 0.1 ppm/V) UL 94 V-0 flame resistant Gold terminations (10 μ" to 20 μ") Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition Vishay’s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for use in oil industry precision applications requiring low noise, long term stability under high temperature, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Plated Gold (10 μ" to 20 μ") Nickel Barrier High Purity Alumina Substrate Adhesion Layer TYPICAL PERFORMANCE ABSOLUTE TCR TOL. 5 0.02 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Passivated nichrome 250  to 3 M ± 5 ppm/°C ± 0.1 % to ± 0.02 % R ± 0.5 % ± 0.1 ppm/V (typical) 100 V to 200 V - 55 °C to + 215 °C - 55 °C to + 215 °C < - 35 dB (typical) R ± 0.01 % CONDITIONS - 55 °C to + 125 °C + 25 °C 2000 h at 215 °C, 25 % rated power 1 year at + 25 °C COMPONENT RATINGS CASE SIZE 0805 1206 2010 2512 Note • Consult factory for additional case size * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60082 Revision: 09-May-11 For technical questions, contact: thinfilm@vishay.com www.vishay.com 1 POWER RATING (mW) 250 at 70 °C 400 at 70 °C 800 at 70 °C 1000 at 70 °C WORKING VOLTAGE (V) 100 200 200 200 RESISTANCE RANGE () 250 to 260K 500 to 775K 500 to 2M 500 to 3M This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance DIMENSIONS in inches D T E L W CASE SIZE 0805 1206 2010 2512 TERM G G G G L 0.080 ± 0.006 0.126 ± 0.008 0.209 ± 0.009 0.259 ± 0.009 W 0.050 ± 0.005 0.063 ± 0.005 0.098 ± 0.005 0.124 ± 0.005 T 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 D 0.016 ± 0.008 0.020 + 0.005/- 0.010 0.020 ± 0.005 0.020 ± 0.005 E 0.015 ± 0.005 0.020 + 0.005/- 0.010 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS - TYPICAL ENVIRONMENTAL TEST Thermal Shock Short Time Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temperature Exposure Load Life (25 % Power, 2000 h, + 215 °C) TCR 10 k R ± (%) 0.02 0.01 0.01 0.01 0.02 0.02 0.5 ± 5 ppm/°C 100 k R ± (%) 0.02 0.01 0.01 0.01 0.02 0.02 0.5 ± 5 ppm/°C DERATING CURVE 100 Percent of Rated Power 75 50 25 0 0 70 215 230 Ambient Temperature °C PLTT0805 500  STABILITY TEST RESULTS 0.50 0.40 0.30 PLTT0805 50 k STABILITY TEST RESULTS 0.50 0.40 0.30 Maximum Δ (%) Maximum Δ (%) 0.20 0.10 0.00 Test Conditions: Case Size: 0805 Resistance Value: 500 Ω Applied Power: 25 % of rated power Test Chamber Temperature: 215 °C 0 125 250 425 500 750 1000 1100 1250 1525 1775 2000 0.20 0.10 0.00 Test Conditions: Case Size: 0805 Resistance Value: 50 kΩ Applied Power: 25 % of rated power Test Chamber Temperature: 215 °C 0 125 250 425 500 750 1000 1100 1250 1525 1775 2000 - 0.10 - 0.20 - 0.30 - 0.40 - 0.50 - 0.10 - 0.20 - 0.30 - 0.40 - 0.50 Time on Test (h) Note • Performance obtained with following mounting conditions PCB: Polymide IPC-7831A STD land patterns Solder paste: PbSnAg (93.5/5/1.5) Time on Test (h) www.vishay.com 2 For technical questions, contact: thinfilm@vishay.com Document Number: 60082 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT Precision Low TCR High Temperature Thin Film Vishay Dale Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance GLOBAL PART NUMBER INFORMATION P GLOBAL MODEL PLTT L CASE SIZE 0805 1206 2010 2512 T T 0 8 0 5 Z 1 0 0 1 Q G T 1 TCR CHARACTERISTIC Z = ± 5 ppm/°C RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 1001 = 1 k 2500 = 250  Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. 982R6 = 982.6  532R41 = 532.41  TOLERANCE Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % TERMINATION G = Wraparound Gold over Ni barrier (10 μ" min. Au) PACKAGING WS = WAFFLE WI = 100 min./1mult (item single lot date code) WP = 100 min./1mult (package unit single lot date code) TAPE AND REEL T1 = 1000 min., 100 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min./1mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) Document Number: 60082 Revision: 09-May-11 For technical questions, contact: thinfilm@vishay.com www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1