RGL41B

BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor Surface Mount Glass Passivated Junction Fast Switching Rectifier FEATURES SUPERECTIFIER® • Superectifier structure for high reliability condition • Ideal for automated placement • Fast switching for high efficiency • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 DO-213AB • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 1.0 A 50 V to 1000 V 30 A PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. MECHANICAL DATA Case: DO-213AB, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating 150 ns, 250 ns, 500 ns 1.3 V 175 °C TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL FAST SWITCHING TIME DEVICE: 1ST BAND IS RED Polarity color bands (2nd band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT = 55 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Maximum full load reverse current, full cycle average at TA = 55 °C Operating junction and storage temperature range VRRM VRMS VDC IF(AV) RGL41A Gray 50 35 50 RGL41B Red 100 70 100 RGL41D RGL41G Orange 200 140 200 Yellow 400 280 400 1.0 RGL41J Green 600 420 600 RGL41K RGL41M Blue 800 560 800 Violet 1000 700 1000 V V V A BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 BYM 11-600 BYM 11-800 BYM 11-1000 UNIT IFSM 30 A IR(AV) TJ, TSTG 50 - 65 to + 175 μA °C Document Number: 88547 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance TEST CONDITIONS SYMBOL BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 1.3 5.0 IR TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz trr CJ 150 15 50 250 500 ns pF μA BYM 11-600 BYM 11-800 BYM UNIT 11-1000 V 1.0 A TA = 25 °C VF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL RJA (1) RJT (2) BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 75 BYM 11-600 BYM 11-800 BYM 11-1000 UNIT Maximum thermal resistance °C/W 30 Notes (1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N RGL41J-E3/96 RGL41J-E3/97 BYM11-600-E3/96 BYM11-600-E3/97 RGL41JHE3/96 RGL41JHE3/97 (1) (1) (1) UNIT WEIGHT (g) 0.114 0.114 0.114 0.114 0.114 0.114 0.114 0.114 PREFERRED PACKAGE CODE 96 97 96 97 96 97 96 97 BASE QUANTITY 1500 5000 1500 5000 1500 5000 1500 5000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel BYM11-600HE3/96 BYM11-600HE3/97 (1) (1) Note AEC-Q101 qualified For technical questions within your region, please contact one of the following: Document Number: 88547 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 2 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.25 10 Average Forward Rectified Current (A) 1.00 Instantaneous Reverse Current (µA) Resistive or Inductive Load 1 0.75 TJ = 100 °C 0.50 0.1 0.25 TJ = 25 °C 0.01 0 20 40 60 80 100 0 25 50 75 100 125 150 175 Terminal Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 30 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Peak Forward Surge Current (A) 25 20 Junction Capacitance (pF) 1 10 100 10 15 10 0 1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 10 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 1 10 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 1 Mounted on 0.20" x 0.27" (5 mm x 7 mm) Copper Pad Areas 0.1 0.01 0.1 1 10 100 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Document Number: 88547 Revision: 15-Mar-11 Fig. 6 - Typical Transient Thermal Impedance For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB Solderable Ends Mounting Pad Layout 0.138 (3.5) MAX. 1st Band D2 = 0 D1 + 0.008 (0.20) - D2 D1 = 0.105 (2.67) 0.095 (2.41) 0.118 (3.0) MIN. 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.022 (0.56) 0.018 (0.46) 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) For technical questions within your region, please contact one of the following: Document Number: 88547 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 4 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1