SFH6325-X009

SFH6325/SFH6326 Vishay Semiconductors High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output FEATURES • Isolation test voltage, 5300 VRMS • TTL compatible • Bit rates: 1.0 MBit/s A1 1 C1 2 C2 3 A2 4 i179071 8 C(VCC) • High common mode transient immunity • Bandwidth 2.0 MHz • Open collector output • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 7 C1(V01) 6 C2(V02) 5 E(GND) DESCRIPTION The SFH6325/SFH6326 are dual channel optocouplers with a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2.0 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. AGENCY APPROVALS • UL1577, file no. E52744 system code H or J, double protection ORDER INFORMATION PART SFH6325 SFH6326 SFH6325-X009 SFH6326-X006 SFH6326-X007 SFH6326-X009 Note For additional information on the available options refer to option information. REMARKS CTR > 7.0 %, DIP-8 CTR > 19 %, DIP-8 CTR > 7.0 %, SMD-8 (option 9) CTR > 19 %, DIP-8 400 mil (option 6) CTR > 19 %, SMD-8 (option 7) CTR > 19 %, SMD-8 (option 9) ABSOLUTE MAXIMUM RATINGS PARAMETER INPUT Reverse voltage Forward continuous current Peak forward current Maximum surge forward current Derate linearly from 25 °C Power dissipation OUTPUT Supply voltage Output voltage Collector output current Derate linearly from 25 °C Power dissipation Document Number: 83679 Rev. 1.5, 10-Jan-08 (1) TEST CONDITION SYMBOL VR IF VALUE 4.5 25 50 1.0 0.6 50 - 0.5 to 30 - 0.5 to 25 8.0 1.33 50 UNIT V mA mA A mW/°C mW V V mA mW/°C mW www.vishay.com 1 t = 1.0 ms, duty cycle 50 % t ≤ 1.0 µs, 300 pulses/s Tamb ≤ 70 °C IFM IFSM Pdiss VS VO ICO Tamb ≤ 70 °C Pdiss For technical questions, contact: optocoupler.answers@vishay.com SFH6325/SFH6326 Vishay Semiconductors High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output (1) ABSOLUTE MAXIMUM RATINGS PARAMETER COUPLER Isolation test voltage Pollution degree (DIN VDE 0109) Creepage distance Clearance distance Derate linearly from 25 °C Total package dissipation Comparative tracking index per DIN IEC112/VDE 0303 part 1, group IIIa per DIN VDE 6110 Isolation resistance Storage temperature range Ambient temperature range Soldering temperature (2) TEST CONDITION t = 1.0 s SYMBOL VISO VALUE 5300 2 ≥7 ≥7 1.93 UNIT VRMS mm mm mW/°C mW Ptot 145 175 VIO = 500 V, Tamb = 25 °C VIO = 500 V, Tamb = 100 °C RIO RIO Tstg Tamb ≥ 1012 ≥ 1011 - 55 to + 125 - 55 to +100 260 Ω Ω °C °C °C max. 10 s, dip soldering distance to seating plane ≥ 1.5 mm Tsld Notes (1) T amb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (1) PARAMETER INPUT (2) Forward voltage Breakdown voltage Reverse current Capacitance Temperature coefficient of forward voltage OUTPUT Logic low supply current Supply current, logic high Logic low output voltage Logic high output current Channel to channel (3) crosstalk COUPLER Capacitance (input to output) f = 1.0 MHz CIO 0.6 pF IF = 16 mA, VO = open, VCC = 4.5 V IF = 0 mA, VO = open, VCC = 15 V IF = 16 mA, VCC = 4.5 V, IO = 1.1 mA SFH6325 IF = 16 mA, VCC = 4.5 V, IO = 3.0 mA SFH6326 IF = 0 mA, VO = VCC = 5.5 V IF = 0 mA, VO = VCC = 15 V IF = 16 mA, VO = VCC = 5.5 V ICCL ICCH VOL VOL IOH IOH IOH-XT 100 0.01 0.1 0.1 3.0 200 4.0 0.5 0.5 500 50 500 µA µA V V nA µA nA IF = 16 mA IR = 10 µs VR = 4.5 V VR = 0 V, f = 1.0 MHz IF = 16 mA VF VBR IR CO ΔVF/ΔTamb 4.5 0.5 125 - 1.7 10 1.6 1.9 V V µA pF mV/°C TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Notes (1) T amb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (2) T amb = 0 °Cto 70 °C, unless otherwise specified. (3) To measure crosstalk, turn on the LED for channel 1 and the output current for channel 2 in logic high. Repeat for channel 2. www.vishay.com 2 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83679 Rev. 1.5, 10-Jan-08 SFH6325/SFH6326 High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 16 mA, VCC = 4.5 V, VO = 0.4 V IF = 16 mA, VCC = 4.5 V, VO = 0.5 V PART SFH6325 SFH6326 SFH6325 SFH6326 SYMBOL CTR CTR CTR CTR MIN. 5 19 5 15 TYP. 16 35 MAX. UNIT % % % % Vishay Semiconductors Current transfer ratio SWITCHING CHARACTERISTICS PARAMETER High to low Low to high TEST CONDITION IF = 16 mA, VCC = 5.0 V, RL = 4.1 kΩ IF = 16 mA, VCC = 5.0 V, RL = 1.9 kΩ IF = 16 mA, VCC = 5.0 V, RL = 4.1 kΩ IF = 16 mA, VCC = 5.0 V, RL = 1.9 kΩ PART SFH6325 SFH6326 SFH6325 SFH6326 SYMBOL tPHL tPHL tPLH tPLH MIN. TYP. 0.3 0.2 0.6 0.5 MAX. 1.5 0.8 1.5 0.8 UNIT µs µs µs µs COMMON MODE TRANSIENT IMMUNITY PARAMETER TEST CONDITION IF = 0 mA, CCM = 10 VP-P, VCC = 5.0 V, RL = 4.1 kΩ IF = 0 mA, CCM = 10 VP-P, VCC = 5.0 V, RL = 1.9 kΩ IF = 16 mA, CCM = 10 VP-P, VCC = 5.0 V, RL = 4.1 kΩ IF = 16 mA, CCM = 10 VP-P, VCC = 5.0 V, RL = 1.9 kΩ PART SFH6325 SFH6326 SFH6325 SFH6326 SYMBOL CMH CMH CML CML MIN. TYP. 1000 1000 1000 1000 MAX. UNIT V/µs V/µs V/µs V/µs CMTI at logic high level output CMTI at logic low level output TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 20 30 IF - LED Current in mA IF LED Current in ma 15 75 °C 10 25 °C 0 °C 20 10 5 0 1.3 1.4 1.5 1.6 1.7 isfh6325_04 0 0 20 40 60 80 100 VF - LED forward Voltage isfh6325_03 Ambient Temperature in °C Fig. 1 - LED Forward Current vs. Forward Voltage Fig. 2 - Permissible Forward LED Current vs. Temperature Document Number: 83679 Rev. 1.5, 10-Jan-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 3 SFH6325/SFH6326 Vishay Semiconductors High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output tp - Propagation Delay Time (nS) 900 800 700 600 500 400 300 200 100 0 - 60 - 40 - 20 0 20 40 60 Temperature, TA (°C) 80 100 TpHL at 1.5 V TpHL at 3 V TpLH at 1.5 V SFH6326 at VCC = 5.0 V IF = 16 mA, RL = 1.9 kΩ TpLH at 3 V 120 Total Po wer (mW) 100 80 60 40 20 0 0 isfh6325_05 Detector Emitter 20 40 60 80 Ambient Temperature (°C) 100 isfh6325_08 Fig. 3 - Permissible Power Dissipation vs. Temperature Fig. 6 - Propagation Delay vs. Ambient Temperature 25 tp - Propagation Delay Time (ns) (VCC = 5.0 V) IF = 40 mA IF = 35 mA IF = 30 mA IF = 25 mA IF = 20 mA IF = 15 mA 1400 1200 1000 800 600 400 200 0 - 60 - 40 isfh6325_09 Output Current, Io (mA) 20 15 10 5 0 0 5 SFH6325 at VCC = 5.0 V, IF = 16 mA, RL = 4.1 kΩ TpLH IF = 10 mA IF = 5 mA TpHL 10 15 Output Voltage, Vo (V) 20 25 - 20 isfh6325_06 0 20 40 60 Temperature, TA (°C) 80 100 Fig. 4 - Output Current vs. Output Voltage Fig. 7 - Propagation Delay vs. Ambient Temperature 8 Output Current, Io (mA) 7 6 5 4 3 2 1 0 at VO = 0.4 V, VCC = 5.0 IF = 20 mA IF = 16 mA IF = 10 mA 100 IOH - Collector Current, IC (nA) 10 1 0.1 0.01 VCC = VO = 15 V VCC = VO = 5 V IF = 2 mA IF = 1 mA - 60 isfh6325_07 - 40 - 20 0 20 40 60 Temperature, TA (°C) 80 100 0.001 -60 isfh6325_10 -40 -20 0 20 40 60 Temperature, TA (°C) 80 100 Fig. 5 - Output Current vs. Temperature Fig. 8 - Logic High Output Current vs. Temperature www.vishay.com 4 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83679 Rev. 1.5, 10-Jan-08 SFH6325/SFH6326 High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output 0.6 ΔiF/ΔiO /Small Signal Current ˇ Transfer Ratio 0.5 0.4 0.3 0.2 0.1 0 0 isfh6325_11 Vishay Semiconductors (VCC = 5.0 V, RL = 100 Ω) 5 10 15 IF (mA) 20 25 Fig. 9 - Small Signal Current Transfer Ratio vs. Input Current Pulse generator ZO = 5 0 Ω t r , t f = 5 ns duty cycle 10 % t ≤ 100 µs IF 1 2 I monitor F IF t 8 7 C=0.1 µF 3 4 6 C L = 15 pF 5 t PHL 5V RL VO VO 5V 1.5 V VOL t t PLH 100 Ω isfh6325_01 Fig. 10 - Switching Time and Test Circuit VCM 90 % 1 IF A B VCC 4 5 2 3 7 6 8 5V RL VO C = 0.1 µF 0V 10 % 90 % t VO 5V A: I F = 0 mA t tr tf 10 % Pulse generator V CM ZO = 5 0 Ω t r , t f = 8 ns isfh6325_02 VO VOL B: I F = 16 mA t Fig. 11 - Waveform and Test Circuit for Common Mode Transient Immunity Document Number: 83679 Rev. 1.5, 10-Jan-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 5 SFH6325/SFH6326 Vishay Semiconductors High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output PACKAGE DIMENSIONS in inches (millimeters) Pin one ID 4 0.255 (6.48) 0.268 (6.81) 5 6 7 8 ISO method A 3 2 1 0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 4° typ. 0.130 (3.30) 0.150 (3.81) 0.050 (1.27) 0.020 (0.51) 0.018 (0.46) 0.022 (0.56) i178006 0.031 (0.79) 0.300 (7.62) typ. 10° 0.035 (0.89) 0.100 (2.54) typ. 3° to 9° 0.008 (0.20) 0.012 (0.30) 0.230 (5.84) 0.110 (2.79) 0.130 (3.30) 0.250 (6.35) Option 6 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.028 (0.7) min. Option 7 0.300 (7.62) typ. Option 9 0.375 (9.53) 0.395 (10.03 ) 0.300 (7.62) ref. 0.180 (4.6) 0.160 (4.1) 0.0040 (0.102) 0.0098 (0.249) 0.020 (0.51 ) 0.040 (1.02 ) 0.315 (8.00) min. 18450 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) 0.331 (8.4) min. 0.406 (10.3) max. 0.012 (0.30 ) typ. 15° max. www.vishay.com 6 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83679 Rev. 1.5, 10-Jan-08 SFH6325/SFH6326 High Speed Optocoupler, Dual Channel, 1 MBd, Transistor Output OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. Vishay Semiconductors We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number: 83679 Rev. 1.5, 10-Jan-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1