SMF7V5A-M

SMF5V0A-M to SMF51A-M Vishay Semiconductors Surface Mount ESD Protection Diodes FEATURES • • • • • 17249 1 2 20278 • • • 20279 MARKING (example only) XY Bar = cathode marking Y = type code (see table below) X = date code • • • • • • For surface mounted applications Low-profile package Optimized for LAN protection applications Ideal for ESD protection of data lines in accordance with IEC 61000-4-2 (IEC 801-2) Ideal for EFT protection of data lines in accordance with IEC 61000-4-4 (IEC 801-4) ESD-protection acc. IEC 61000-4-2 ± 30 kV contact discharge ± 30 kV air discharge Low incremental surge resistance, excellent clamping capability 200 W peak pulse power capability with a 10/1000 µs waveform, repetition rate (duty cycle): 0.01 % Very fast response time High temperature soldering guaranteed: 260 °C/10 s at terminals e3 - Sn AEC-Q101 qualified Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 61249-2-21 definiton ORDERING INFORMATION SMF5V0A-M-xx GS08 = 3K per 7" reel (8 mm tape), 30K/box GS18 = 10K per 13" reel (8 mm tape), 50K/box Environmental suffix -M- defines halogen-free Part number PACKAGE DATA DEVICE NAME SMF5V0A-M SMF6V5A-M SMF7V0A-M SMF7V5A-M SMF8V0A-M SMF8V5A-M SMF9V0A-M SMF10A-M SMF11A-M SMF12A-M SMF13A-M SMF14A-M SMF15A-M SMF16A-M SMF17A-M SMF18A-M SMF20A-M SMF22A-M SMF24A-M SMF PACKAGE NAME TYPE CODE NE NK NM NP NR NT NV NX NZ OE OG OK OM OP OR OT OV OX OZ 15 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY SOLDERING CONDITIONS LEVEL Document Number: 83355 Rev. 1.0, 22-Sep-10 For technical questions, contact: ESDprotection@vishay.com www.vishay.com 1 SMF5V0A-M to SMF51A-M Vishay Semiconductors PACKAGE DATA DEVICE NAME SMF26A-M SMF28A-M SMF30A-M SMF33A-M SMF36A-M SMF40A-M SMF43A-M SMF45A-M SMF48A-M SMF51A-M SMF PACKAGE NAME TYPE CODE PE PG PK PM PP PR PT PV PX PZ 15 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY SOLDERING CONDITIONS LEVEL Surface Mount ESD Protection Diodes ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Peak pulse current Peak pulse power Peak forward surge current ESD immunity Thermal resistance Forward clamping voltage Operating temperature Storage temperature TEST CONDITIONS tp = 10/1000 µs waveform acc. IEC 61000-4-5 tp = 8/20 µs waveform acc. IEC 61000-4-5 tp = 10/1000 µs waveform acc. IEC 61000-4-5 8.3 ms single half sine-wave Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Mounted on epoxy glass PCB with 3 mm x 3 mm, Cu pads ( 40 µm thick) I F = 12 A Junction temperature SYMBOL IPPM PPP IFSM VESD RthJA VF TJ TSTG VALUE see “Electrical Characteristics” 1000 200 20 ± 30 ± 30 180 3.5 - 55 to + 150 - 55 to + 150 UNIT A W W A kV kV K/W V °C °C ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) REVERSE BREAKDOWN VOLTAGE at IT, tp  5 ms VBR MIN. (V) SMF5V0A-M SMF6V0A-M SMF6V5A-M SMF7V0A-M SMF7V5A-M SMF8V0A-M SMF8V5A-M SMF9V0A-M SMF10A-M SMF11A-M SMF12A-M SMF13A-M SMF14A-M SMF15A-M SMF16A-M SMF17A-M 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 REVERSE REVERSE TEST WORKING CURRENT CURRENT at VRWM VOLTAGE IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 VRWM (V) 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 IR (µA) 400 400 250 100 50 25 10 5 2.5 2.5 2.5 1 1 1 1 1 REVERSE MAXIMUM PEAK PULSE CLAMPING CAPACITANCE PROTECTION PATHS VOLTAGE at VR = 0 V, CURRENT at IPPM tp = 10/1000 s f = 1 MHz IPPM (A) 21.7 19.4 17.9 16.7 15.5 14.7 13.9 13.5 11.8 11 10.1 9.3 8.6 8.2 7.7 7.2 VC (V) 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 CD TYP. (pF) 1030 1010 850 750 730 670 660 620 570 460 440 420 370 350 340 310 Nchannel 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PART NUMBER www.vishay.com 2 For technical questions, contact: ESDprotection@vishay.com Document Number: 83355 Rev. 1.0, 22-Sep-10 SMF5V0A-M to SMF51A-M Surface Mount ESD Protection Diodes Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) REVERSE BREAKDOWN VOLTAGE at IT, tp  5 ms VBR MIN. (V) SMF18A-M SMF20A-M SMF22A-M SMF24A-M SMF26A-M SMF28A-M SMF30A-M SMF33A-M SMF36A-M SMF40A-M SMF43A-M SMF45A-M SMF48A-M SMF51A-M 20 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 REVERSE REVERSE TEST WORKING CURRENT CURRENT at VRWM VOLTAGE IT (mA) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VRWM (V) 18 20 22 24 26 28 30 33 36 40 43 45 48 51 IR (µA) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 REVERSE MAXIMUM PEAK PULSE CLAMPING CAPACITANCE PROTECTION PATHS VOLTAGE at VR = 0 V, CURRENT at IPPM tp = 10/1000 s f = 1 MHz IPPM (A) 5.8 6.2 5.6 5.1 4.8 4.4 4.1 3.8 3.4 3.1 2.9 2.8 2.6 2.4 VC (V) 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 CD TYP. (pF) 305 207 265 240 225 210 205 190 180 165 160 155 150 145 Nchannel 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PART NUMBER TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 IPPM - Peak Pulse Current, % IRSM PPP - Peak Pulse Power (kW) Non-repetitive pulse waveform shown in fig. 3 TA = 25 °C 150 tr =10 µs TJ = 25 °C pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM 100 Peak value IPPM Half value IPPM IPPM 2 1 50 10/100 s waveform as defined by R.E.A. 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 17250 0 0 17252 td 1 2 t - Time (ms) 3 4 td - Pulse Width (s) Fig. 1 - Peak Pulse Power Rating Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage (%) 100 Fig. 3 - Pulse Waveform 75 50 25 0 0 25 50 75 100 125 150 175 200 17251 TA - Ambient Temperature Fig. 2 - Pulse Derating Curve Document Number: 83355 Rev. 1.0, 22-Sep-10 For technical questions, contact: ESDprotection@vishay.com www.vishay.com 3 SMF5V0A-M to SMF51A-M Vishay Semiconductors Surface Mount ESD Protection Diodes PACKAGE DIMENSIONS in millimeters (inches): SMF 0.85 (0.033) 0.35 (0.014) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 5 1.9 (0.075) 1.7 (0.067) 1.2 (0.047) 0.8 (0.031) 0 (0.000) Detail Z enlarged 1.08 (0.043) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.88 (0.035) Foot print recommendation: 1.3 (0.051) 1.3 (0.051) Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 17247 1.4 (0.055) 2.9 (0.114) 5 www.vishay.com 4 For technical questions, contact: ESDprotection@vishay.com Document Number: 83355 Rev. 1.0, 22-Sep-10 SMF5V0A-M to SMF51A-M Surface Mount ESD Protection Diodes BLISTERTAPE DIMENSIONS in millimeters (inches) Vishay Semiconductors PS Document-No.: S8-V-3717.02-001 (3) 18513 Document Number: 83355 Rev. 1.0, 22-Sep-10 For technical questions, contact: ESDprotection@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1