TA22-100MG0016

TA 22 Vishay Sfernice Single Value Chip Resistor FEATURES • Small size 20 mil square • Resistance range 10 Ω to 1 MΩ • Resistor material: self-passivating Tantalum nitride • Silicon substrate for good power dissipation Actual Size RoHS COMPLIANT • Low cost TYPICAL PERFORMANCE Thin film resistors are often an excellent solution for analog design problems where space is limited and high packing density is required. Due to their Tantalum Nitride resistive layer these resistors are stable 0.07 % (2000 hours, rated power at 70 °C) and moisture resistant. ABS TCR TOL 100 ppm/°C 0.5 % SCHEMATIC AND PATTERN R STANDARD ELECTRICAL SPECIFICATIONS TEST MATERIAL Resistance Range Absolute TCR Absolute Tolerance Power Dissipation Stability Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability SPECIFICATIONS TANTALUM NITRIDE 10 Ω to 1 MΩ ± 100 ppm/°C (± 50 ppm/°C on request) ± 0.5 %, ± 1 %, ± 2 % 100 mW at 25 °C, 50 mW at + 70 °C, 25 mW at + 125 °C ± 0.07 % typical, ± 0.1 Max. < 0.1 ppm/Volt 50 Volts DC - 55 °C to + 155 °C - 55 °C to + 155 °C < - 35 dB typical < 0.01 µV/°C 100 ppm 1 year at + 25 °C MIL-STD-202 Method 308 2000 hrs. at + 70 °C at Pn - 55 °C to + 155 °C CONDITIONS www.vishay.com 156 For technical questions, contact: sfer@vishay.com Document Number: 60062 Revision: 21-Aug-06 TA 22 Single Value Chip Resistor Vishay Sfernice DIMENSIONS in inches and millimeters DIMENSION B INCHES 0.021 ± 0.002 0.021 ± 0.002 0.004 0.004 0.015 MILLIMETERS 0.55 ± 0.10 0.55 ± 0.10 0.10 0.10 0.40 Max. A B A C D E C D E MECHANICAL SPECIFICATIONS Resistive Element Passivation Substrate Material Bonding Pads Tantalum Nitride Tantalum Pentoxide (Autopassivation) Standard Silicon Aluminum GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TA22-100KD0016 (preferred part number format) T A 2 2 - 1 0 0 K D 0 0 1 6 GLOBAL MODEL VALUE Decimal R, K or M TOLERANCE D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % OPTION leave blank if no option Historical Part Number example: TA22 10K 0.5 % R0016 (will continue to be accepted) TA22 HISTORICAL MODEL 10K VALUE 0.5 % TOLERANCE R0016 OPTION Document Number: 60062 Revision: 21-Aug-06 For technical questions, contact: sfer@vishay.com www.vishay.com 157 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1