LANC512RD

Rev B LAN C SERIES TO 3 WATTS - LAN C SERIES Single and Dual Output DIP Package TO 3 WATTS FEATURES • Miniature Dual In-Line Package • Two Levels of Isolation Available • Low Reflected Ripple Current • Regulated • Ripple/Noise: 50mV p-p typical • 3KV isolation option THE LAN C SERIES FROM WALL INDUSTRIES Offering alternate combinations from four different input voltage ranges; nine different output voltages; two levels of isolation and three tiers of power, the LAN C Series of DC/DC converters can be tailor-made to fit most any low power conversion requirement. SPECIFICATIONS: LAN C SERIES All specifications apply @ +25 C ambient unless otherwise noted. INPUT SPECIFICATIONS Input Voltage Range ....5, 12, 15, 24,48VDC ±10% Input Filtering ........................................Pi Network GENERAL SPECIFICATIONS Efficiency (typical) ..................................55 to 65% Isolation Voltage (input to output)500VDC or 3000VDC Switching Frequency ..........................40kHz (min.) OUTPUT SPECIFICATIONS Output Current ........................................see table Voltage Tolerance ..........±5 (nom. line, 100% load) Line Regulation: Regulated ..........................±1.0% Load Regulation: Regulated(H option L & L = .5%)±1.0% Ripple/Noise (20MHz BW) ......................50mV p-p Short Circuit Protection ........................continuous ENVIRONMENTAL SPECIFICATIONS Operating Temperature ......................-25° to 71°C Storage Temperature ......................-40° to +125°C Cooling ....................................Free air convection PHYSICAL SPECIFICATIONS Dimensions: ......................................1.25 x 0.8 x 0.4” Case Material.................Non-conductive black plastic Due to advances in technology, specifications subject to change without notice. 6/13/08 1 603 778 2300 WWW.WALLINDUSTRIES.COM Rev B TO 3 WATTS 5VDC ±10% INPUT VOLTAGE 12VDC ±10% INPUT VOLTAGE RANGE RANGE Output Output Model Voltage Current Number (VDC) (mA) (SEE NOTES) Output Output Model Voltage Current Number (VDC) (mA) (SEE NOTES) LAN C SERIES 15VDC ±10% INPUT VOLTAGE RANGE Output Output Model Voltage Current Number (VDC) (mA) (SEE NOTES) 24VDC ±10% INPUT VOLTAGE RANGE Output Output Model Voltage Current Number (VDC) (mA) (SEE NOTES) 5 5 5 9 9 9 12 12 12 15 15 15 ±5 ±5 ±5 ±9 ±9 ±9 ±12 ±12 ±12 ±15 ±15 ±15 300 400 600 170 250 300 125 166 250 100 133 200 ±150 ±200 ±300 ±90 ±110 ±165 ±60 ±83 ±125 ±50 ±67 ±100 LANC505R LANC505R2 LANC505R3 LANC509R LANC509R2 LANC509R3 LANC512R LANC512R2 LANC512R3 LANC515R LANC515R2 LANC515R3 LANC505RD LANC505RD2 LANC505RD3 LANC509RD LANC509RD2 LANC509RD3 LANC512RD LANC512RD2 LANC512RD3 LANC515RD LANC515RD2 LANC515RD3 5 5 5 9 9 9 12 12 12 15 15 15 ±5 ±5 ±5 ±9 ±9 ±9 ±12 ±12 ±12 ±15 ±15 ±15 300 400 600 170 250 300 125 166 250 100 133 200 ±150 ±200 ±300 ±90 ±110 ±165 ±60 ±83 ±125 ± 50 ± 67 ±100 LANC1205R LANC1205R2 LANC1205R3 LANC1209R LANC1209R2 LANC1209R3 LANC1212R LANC1212R2 LANC1212R3 LANC1215R LANC1215R2 LANC1215R3 LANC1205RD LANC1205RD2 LANC1205RD3 LANC1209RD LANC1209RD2 LANC1209RD3 LANC1212RD LANC1212RD2 LANC1212RD3 LANC1215RD LANC1215RD2 LANC1215RD3 5 5 5 9 9 9 12 12 12 15 15 15 ±5 ±5 ±5 ±9 ±9 ±9 ±12 ±12 ±12 ±15 ±15 ±15 300 400 600 170 250 300 125 166 250 100 133 200 ±150 ±200 ±300 ±90 ±110 ±165 ±60 ±83 ±125 ±50 ±67 ±100 LANC1505R LANC1505R2 LANC1505R3 LANC1509R LANC1509R2 LANC1509R3 LANC1512R LANC1512R2 LANC1512R3 LANC1515R LANC1515R2 LANC1515R3 LANC1505RD LANC1505RD2 LANC1505RD3 LANC1509RD LANC1509RD2 LANC1509RD3 LANC1512RD LANC1512RD2 LANC1512RD3 LANC1515RD LANC1515RD2 LANC1515RD3 5 5 5 9 9 9 12 12 12 15 15 15 ±5 ±5 ±5 ±9 ±9 ±9 ±12 ±12 ±12 ±15 ±15 ±15 300 400 600 170 250 300 125 166 250 100 133 200 ±150 ±200 ±300 ±90 ±110 ±165 ±60 ±83 ±125 ±50 ±67 ±100 LANC2405R LANC2405R2 LANC2405R3 LANC2409R LANC2409R2 LANC2409R3 LANC2412R LANC2412R2 LANC2412R3 LANC2415R LANC2415R2 LANC2415R3 LANC2405RD LANC2405RD2 LANC2405RD3 LANC2409RD LANC2409RD2 LANC2409RD3 LANC2412RD LANC2412RD2 LANC2412RD3 LANC2415RD LANC2415RD2 LANC2415RD3 PIN CONNECTIONS NOTE: For 3KV isolation add suffix "H" to part number (“H” suffix not available for 3 watt models) Isolation Single Vin + Vin Vout + Common 1, 24 12, 13 11, 14 500 VDC Dual 1, 24 12, 13 11, 14 3, 10, 15, 22 Vout No Connect 10, 15 2, 3 22, 23 No Pins 2, 23 12 10, 11 14, 15 3,22 3,22 6/13/08 3000 VDC* Single 1, 2 23, 24 13 Dual 1, 2 23, 24 15 10, 11 13 12, 14 WWW.WALLINDUSTRIES.COM 603 778 2300 2 Rev B LAN C SERIES NOTES: TO 3 WATTS 1. Also available with 48VDC in. To specify, insert “48” in part number in place of input voltage. 2. 2 watt models available with 3000VDC I/O isolation. Add”H” onto end of part number for 3000VDC Input/Output isolation. This feature is not available for 3 watt models 3. All DC/DC Converters should be properly fused on front end for protection. all case and pin-to-case dimensions for reference only unless otherwise noted. 6/13/08 3 603 778 2300 WWW.WALLINDUSTRIES.COM