1019700000

    Data sheet W-Series WPE 120/150 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WPE 120/150 1019700000 PE terminal, Screw connection, 120 mm², 14400 A (120 mm²), green / yellow 4008190495671 10 pc(s). Creation date November 6, 2018 2:45:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WPE 120/150   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   32 mm 132 mm 117 mm 125.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 1.26 inch 5.197 inch 4.606 inch 579.85 g -60 °C   Continuous operating temp., max. 130 °C Lead 7439-92-1     Wemid V-0     Colour   green / yellow DEMKO14ATEX1338U 150 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 150 mm²     Temperatures   Continuous operating temp., min.   Environmental Product Compliance   REACH SVHC   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Screw connection, With PE  connection, closed   10...20 Nm   1   2   No   TS 35   Yes Tightening torque (mounting screw) End cover plate required 3...6 Nm Number of levels Number of potentials per tier PE connection N-function PEN function No 1 1 Yes No Yes Additional technical data   Explosion-tested version Interlock Open sides   Yes for screw fixing closed       Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 12400-382 2 AWG     Wire cross section max. (CSA)   250 kcmil CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 6, 2018 2:45:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WPE 120/150   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min.   S6 (DIN 6911) 33.62 mm² 150 mm² on side 2 20 Nm Screw connection 150 mm² 50 mm² 35 mm²         Clamping range, max. 150 mm² Clamping screw M 10 Connection cross-section, stranded, min. 35 mm² Gauge to IEC 60947-1 B13 Stripping length 35 mm Tightening torque, min. 10 Nm Wire connection cross section, finely stranded, max. 150 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 35 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 35 mm²           Centre screw on PE terminals PEN function M6 Yes     1,000 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 250 kcmil Conductor size Field wiring max. (UR) 250 kcmil               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0               Dimensions   TS 35 offset   32 mm PE rating data   Rated short-time current 14400 A (120 mm²) Tightening torque range for fixing screw 3.0...6.0 Nm   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   120 mm² IEC 60947-7-2 8 kV 0.12 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 2 AWG Conductor size Field wiring min. (UR) 2 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Product information   Descriptive text technical data Instructions for accessories   For 50 - 150 mm², the TS 35 x 15 (copper, 2.3 mm thick) mounting rail should be used. Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10). Creation date November 6, 2018 2:45:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WPE 120/150   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   IECEXULD14.0005U_e.pdf DE_PT1002_20160414_249_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date November 6, 2018 2:45:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WPE 120/150   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 6, 2018 2:45:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5