1020280000

    Data sheet W-Series WDU 6 BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WDU 6 BL 1020280000 Feed-through terminal, Screw connection, 6 mm², 800 V, 41 A, Blue 4008190100032 100 pc(s). Creation date November 6, 2018 2:51:18 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WDU 6 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail Net weight   7.9 mm 60 mm 46.5 mm 47 mm 12.83 g           Width (inches) Height (inches) Depth (inches) Weight   0.311 inch 2.362 inch 1.831 inch 14.8 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   Blue DEMKO14ATEX1338U 690 V 6 mm² 41 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 41 A 550 V 6 mm²     Screw connection, for screwable crossconnection, One end without connector   Tightening torque (clamping screw for aluminium conductors)   End cover plate required           Number of levels Number of potentials per tier PE connection N-function PEN function Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   0.8...1.6 Nm 1 2 No TS 35 No 0.8 Nm Yes 1 1 No Yes No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)   Wire connection cross section, finely stranded, two clampable wires, min. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.   0.5 mm²     Wire cross-section, finely stranded, two clampable wires, max. 2.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 2.5 mm²     Number of similar terminals Type of mounting 0.5 mm² Additional technical data   Explosion-tested version Open sides   Yes right 1 Snap-on Creation date November 6, 2018 2:51:18 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WDU 6 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data CSA rating data   Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   200039-1057876 600 V 22 AWG       Current size C (CSA) Wire cross section max. (CSA)         Clamping range, max. 10 mm² Clamping screw M 3.5 Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 A5 Stripping length 12 mm Tightening torque, min. 0.8 Nm Twin wire-end ferrules, max. 4 mm² Type of connection Screw connection Wire connection cross section AWG, min. AWG 26 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 6 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 6 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross-section, solid core, min. 0.5 mm² 50 A 8 AWG Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.8 x 4.0 mm 0.22 mm² 10 mm² on side 2 1.6 Nm 3 0.5 mm² AWG 8 10 mm² 0.5 mm² 0.5 mm² 10 mm²                     Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   6 mm² 41 A         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 22 AWG 22 AWG 600 V         Conductor size Factory wiring max. (UR) 8 AWG Conductor size Field wiring max. (UR) 8 AWG Current size C (UR) 50 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   IEC 60947-7-1 8 kV 800 V 57 A 0.78 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Creation date November 6, 2018 2:51:18 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WDU 6 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Descriptive text ordering data Descriptive text technical data Instructions for accessories   1000 VDC rated voltage tested. For colour versions, see section on W-series Accessories - specific functions. Note max. current of terminal (57 A) when using WQV! Wire connection H07V-..10 and AWG 8 with tightening torque of 1.4-1.6 Nm. Cross-connections, socket and test plug, see section "W series accessories". Only 400 V with the use of shield bus LS 2.8 1056400000. Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WDU 6.pdf IECEXULD14.0005U_e.pdf CB Testreport CB Certificate DE_PT1001_20160414_221_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_ IECEx_WDU-WPE 6.pdf Safety note   Safety notice   Safety Information Creation date November 6, 2018 2:51:18 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WDU 6 BL   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 6, 2018 2:51:18 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5