1270050000

    Data sheet... W-Series, WMF WMF 2.5 PE BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Weidmüller's new WMF (Weidmüller Multi-Functional) line of terminal blocks provide a multi-functional solution for routing and distributing signals. This space-saving terminal combines all the necessary functionality into a single solution. It features an integrated shield connection and can be used with feed-through, fuse and disconnect functionality. The three cross-connection channels and wide variety of labelling options offer additional flexibility. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1270050000 WMF 2.5 PE BL W-Series, WMF, PE terminal, Rated cross-section: 2.5 mm², Screw connectionDirect mounting 4050118097351 50 pc(s). Creation date May 23, 2013 11:43:29 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 1     Data sheet... W-Series, WMF WMF 2.5 PE BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   88 mm 44.5 mm 13.28 g       Width Height of lowest version   -50 °C     Storage temperature Continuous operating temp., max.     Open sides Version             Stripping length 10 mm Connection direction on side Clamping range, rated connection, min. 0.5 mm² Clamping screw M3 Tightening torque, max. 0.6 Nm Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. 5.08 mm 45 mm Temperatures   Operating temperature Continuous operating temp., min.   120 °C Additional technical data   Installation advice Type of mounting   Direct mounting TS 35 right Screw connection, With PE connection, for plug-in cross-connector, One end without connector Clampable wires (rated connection)   Type of connection Blade size Number of connections Clamping range, rated connection, max. Tightening torque, min. Gauge to IEC 60947-1 Screw connection 0.6 x 3.5 mm 3 4 mm² 0.5 Nm A3 Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12                     Rated voltage Rated current Surge voltage category AWG 26   Rated data   Rated cross-section Rated impulse withstand voltage Pollution severity   2.5 mm² 8 kV 3 800 V 24 A III Creation date May 23, 2013 11:43:29 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 2     Data sheet... W-Series, WMF WMF 2.5 PE BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data UL ratings data   Certificate No. (cURus)           Conductor size Factory wiring max. (cURus) 12 AWG Conductor size Field wiring max. (cURus) 12 AWG Current size B (cURus) 20 A Current size D (cURus) 5A Voltage size C (cURus) 600 V Wire cross section max. (cURus) 12 AWG Wemid V-0     Colour   Blue W-Series, WMF on side 3       Type of connection Number of levels Mounting rail Screw connection 2 TS 35 27-14-03-05   eClass 7.1 27-14-03-05 E60693VOL1SEC95 Conductor size Factory wiring min. (cURus) 26 AWG Conductor size Field wiring min. (cURus) 26 AWG Current size C (cURus) 20 A Voltage size B (cURus) 600 V Voltage size D (cURus) 600 V     Material data   Material UL 94 flammability rating   System specifications   Product family Connection direction Number of connections   Classifications   eClass 6.2   Approvals   Approvals   Creation date May 23, 2013 11:43:29 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 3