Data sheet
ACT20P
ACT20P-PRO DCDC II-S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
ACT20P: The flexible solution
• Precise and highly functional signal converters
• Simple configuration via display (Pro DCDC II), FDT/
DTM software or DIP switch
• Release levers simplify handling
• More space in the control cabinet, from 12.5 mm wide
for two channels
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
ACT20P-PRO DCDC II-S
1481970000
ACT20P, Signal converter/insulator, Signal
converter/isolator, All-purpose, 24…230 V AC/DC
power supply
4050118291032
1 pc(s).
Creation date February 7, 2018 7:56:17 PM CET
Catalogue status 26.01.2018 / We reserve the right to make technical changes.
1
Data sheet
ACT20P
ACT20P-PRO DCDC II-S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Weight
12.5 mm
117.2 mm
113.7 mm
130 g
Width (inches)
Height (inches)
Depth (inches)
Net weight
0.492 inch
4.614 inch
4.476 inch
130 g
-25 °C...70 °C
Storage temperature
-40 °C...85 °C
76 Years
Input voltage
approx. 1 MΩ
< 5 mA: approx. 100 Ω; >5
mA: approx. 5 Ω
Input current
Temperatures
Operating temperature
Probability of failure
MTBF
Input
Number of inputs
Input resistance, voltage
Input resistance, current
1
configurable, ±20 mV…
±300 V
configurable, ± 0.1mA...±
100 mA
Output
Output voltage, note
Cut-off frequency (-3 dB)
load impedance current
Offset current
adjustable, 0...±10 V
> 10 kHz/ < 10 Hz
≤ 600 Ω
20 µA
Output current
load impedance voltage
Offset voltage
Status indicator
adjustable, 0...±20 mA
≥ 1 kΩ
< 10 mV
Green LED
< 0.05 % of measuring
range
3-way isolator, between
input ⁄ output ⁄ supply
≤2.3 W
24…230 V DC ±20 %,
24…230 V AC ±10 % @
48…62 Hz
Configuration
Mounting rail
DIP switch, or via display
and push-buttons
Step response time
Temperature coefficient
3-way isolator, between
input ⁄ output ⁄ supply
4 kVeff, input ⁄ output ⁄
power supply
Impulse withstand voltage
Pollution severity
Standards
General data
Accuracy
Galvanic isolation
Power consumption
Supply voltage
TS 35
≤50 µs
≤0,01% des Messbereichs⁄
°C
Insulation coordination
Galvanic isolation
Insulation voltage
Rated voltage
Surge voltage category
600 V
II
5 kV (1.2/50 µs)
2
EN 60079-0, EN
60079-15, EN 61010-1,
EN 61140, EN 61326-1,
UL 61010-1, SN29500 for
MTBF
Creation date February 7, 2018 7:56:17 PM CET
Catalogue status 26.01.2018 / We reserve the right to make technical changes.
2
Data sheet
ACT20P
ACT20P-PRO DCDC II-S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Connection data
Type of connection
Tightening torque, max.
Clamping range, min.
Wire connection cross section AWG,
min.
Tightening torque, min.
Clamping range, rated connection
Clamping range, max.
Wire connection cross section AWG,
max.
DEMKO15ATEX1397X
EC001774
EC002653
27-21-01-20
27-21-01-20
ETIM 5.0
eClass 6.2
eClass 8.1
eClass 9.1
Screw connection
0.6 Nm
0.5 mm²
AWG 30
0.4 Nm
2.5 mm²
2.5 mm²
AWG 14
Ratings IECEx/ATEX/cUL
Certificate No. (ATEX)
Classifications
ETIM 3.0
ETIM 6.0
eClass 7.1
eClass 9.0
EC002653
27-21-01-20
27-21-01-20
27-21-01-20
Product information
Product information
The universally configurable DC isolating amplifier ACT20P-PRO DCDC II isolates and converts analogue signals.
An analogue input signal (current or voltage) is linearly converted into an analogue output signal (current or
voltage) and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way
isolation).
Properties
• universal wide-range voltage supply
• universally configurable via DIP switch or via the LED display using control buttons
• Active or passive signal output
• Operating status display on a front panel LED
• Galvanic 3-way isolation between input, output and supply.
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of
Conformity
Brochure/Catalogue
Engineering Data
Software
User Documentation
UL file number
Declaration of Conformity
CAT 4.1 ELECTR 16/17 EN
EPLAN, WSCAD, Zuken E3.S
DIP switch configuration tool
instruction sheet
Creation date February 7, 2018 7:56:17 PM CET
Catalogue status 26.01.2018 / We reserve the right to make technical changes.
3
Data sheet
ACT20P
ACT20P-PRO DCDC II-S
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Dimensioned drawing
Wiring
example for DIP switch setting (with ACT20 tool)
Creation date February 7, 2018 7:56:17 PM CET
Catalogue status 26.01.2018 / We reserve the right to make technical changes.
4
很抱歉,暂时无法提供与“1481970000”相匹配的价格&库存,您可以联系我们找货
免费人工找货